







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Richland Hills: What It Takes and What It Costs
Asphalt driveway paving and resurfacing in Richland Hills typically runs $3,500 to $9,000 for a new installation or full-depth rebuild, while an overlay on a sound base falls closer to the low end. Most residential driveways here take two to three days on site, plus a cure window before you park on them. Call (855) 912-5373 for a free on-site estimate and a written line-item price before anyone touches your driveway.
Tearing Out, Rebuilding, and Resurfacing: How the Work Actually Goes

An asphalt driveway isn’t a pour-and-go job. The base does most of the work, and in North Texas that base is fighting shifting clay the whole time. Here’s the sequence we follow on a Richland Hills driveway, stage by stage.
Stage 1: Walk-through and measurement (day 1, about an hour)
We measure the existing footprint, check slope and drainage direction, and look for the failure signature. Alligator cracking usually means the base is gone. A few long cracks with no spider-webbing often means the surface just aged out and an overlay is realistic. You decide at this stage whether we’re surfacing over what’s there or tearing out to raw soil.
Stage 2: Demo and haul-off (day 1, three to five hours)
If we’re rebuilding, an excavator breaks out the old asphalt and a crew loads it into a dumpster or dump truck. Driveways with old concrete aprons under the asphalt take longer because that concrete has to come out too. You’ll want cars off the driveway and out of the street by 7 a.m. on demo day.
Stage 3: Grading, base, and compaction (day 2, most of the day)
We cut the subgrade to the right depth, then bring in crushed limestone base and compact it in lifts. A driveway over expansive clay needs six inches of compacted base at minimum, sometimes more with a geotextile fabric layer to keep clay from pumping up into the stone. This is the stage that decides whether your driveway lasts eight years or twenty. Skipping compaction is the most common shortcut we see in Richland Hills driveway work.
Stage 4: Paving and rolling (day 3, half a day)
Hot-mix asphalt arrives by truck and gets laid at two to three inches compacted for a residential driveway. A steel drum roller compacts it while it’s still hot. Edges get hand-tamped. You’ll see a smooth, dark surface when we leave, and it’ll lighten over the next several months as the oils cure.
Stage 5: Cure and first seal (three to twelve months later)
New asphalt needs to cure before sealing, usually a minimum of 90 days and often a full season. Sealing too early traps solvents and softens the surface. We’ll tell you when your first seal coat is due, typically the following spring.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Asphalt, Overlay, or Something Else: The Options You’ll Weigh
Most Richland Hills homeowners are choosing between a full-depth asphalt rebuild, a resurfacing overlay, or switching materials altogether. Each has a real trade-off, and the right answer depends on how bad the base is.
- Full-depth asphalt rebuild ($3,500 to $9,000): New base, new asphalt, proper compaction. Best lifespan, and the right call when the old driveway has alligator cracking or settled sections.
- Asphalt overlay or resurfacing: A fresh asphalt layer over a driveway whose base is still sound. Cheaper and faster, but only works when the existing surface is structurally intact. If the base is failing, an overlay just hides the problem for a couple of years.
- Hot-mix vs. cold-patch: Hot-mix is the real material and it’s what a proper driveway uses. Cold patch is a temporary repair product, and anyone quoting it for a full driveway isn’t quoting you a driveway.
- Base depth and fabric: Six inches of compacted base is the floor for this climate. Geotextile fabric adds cost but pays for itself on clay-heavy lots where subgrade movement is likely.
- Seal coating ($250 to $700): A maintenance item, not a repair. Done on schedule it extends asphalt life. Done on a failing driveway it’s wasted money.
- Drainage and edge restraint: Where the driveway meets the garage slab and where it ties into the street, you need proper slope and a defined edge. Water pooling at the garage threshold is a call we get often in Richland Hills.
If your project is part of a larger exterior plan, our Driveway & Pavers in Richland Hills page covers the full scope of what we build here.
What Asphalt Driveways & Resurfacing Costs in Richland Hills, TX

Asphalt driveway paving in Richland Hills runs $3,500 to $9,000. A full driveway replacement – demo, new base, new asphalt – sits at $5,000 to $14,000. Resurfacing and driveways sealing are priced separately, at $250 to $700 for a seal coat. Here’s what pushes a job toward the high end:
- Square footage: A single-car driveway at 400 square feet and a three-car at 900 square feet are completely different jobs. Width matters as much as length.
- Base condition and clay: Expansive clay subgrade in this part of Tarrant County often needs deeper base, fabric, or subgrade stabilization, adding cost.
- Access and haul-off: Tight side yards and narrow streets mean smaller equipment and slower demo.
- Drainage work: French drains, swales, or regrading to move water away from the house add to the scope.
- Permit scope: A straight replacement in the existing footprint usually doesn’t trigger permitting, but widening an approach or changing drainage can.
A written estimate from us lists square footage, base depth, asphalt thickness, compaction, haul-off, and drainage line by line. What’s not included: utility relocation if a line runs through the driveway, and any landscaping repair after demo.
See the difference
Before
After
Before
After
Before
AfterWhy Richland Hills Driveways Fail the Way They Do
Richland Hills is a fully built-out inner-ring Fort Worth suburb, and most of its housing went up in the 1950s through the 1970s. That means we’re working on driveways that were poured or paved decades ago, often over a base that was never designed for today’s vehicles. The shrink-swell clay under this ZIP (76118) is the real culprit: it swells when it’s wet, shrinks when it’s dry, and slowly works the base out of level. We see the result most often on driveways near the Haltom City line and in the older blocks off Baker Boulevard, where the asphalt has cracked along the edge and settled toward the garage. Because lots here are tight and setbacks are small, there’s little room for equipment, and the driveway often sits right against the house – so proper drainage isn’t a nice-to-have, it’s the difference between a driveway that lasts and one that sends water under your slab. Resurfacing over a visibly failing base is the mistake we see most, and it’s a short-term fix to a long-term problem.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Richland Hills

Most residential projects take two to three days on site, plus a short cure window before you can park on the driveway. The base compaction stage is the slowest part, and it’s the one we won’t rush – that’s what determines how long the asphalt holds up.
A like-for-like replacement in the existing footprint usually doesn’t need a permit, but widening the approach, changing drainage, or altering the curb cut can. We’ll check the scope against Richland Hills requirements and pull whatever is needed before any equipment shows up. Call (855) 912-5373 for a free estimate that spells out the permit question for your specific driveway.
Resurfacing works when the base is sound and the cracks are cosmetic, but a driveway with alligator cracking or visible settling needs a rebuild. Overlaying a failing base just delays the problem and costs you twice. We’ll tell you straight which category your driveway falls into.
Asphalt paving runs $3,500 to $9,000, full replacement is $5,000 to $14,000, and a seal coat is $250 to $700. Size, base condition, drainage, and access drive the number. Call (855) 912-5373 for a firm written quote – estimates are free and there’s no pressure.
Every asphalt driveway we build is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right. Paving is only as good as the base underneath it, so we stand behind both – and we’ll put the warranty terms in writing before you sign anything.
Get a Free Asphalt Driveway Estimate in Richland Hills
If your driveway is cracking, settling, or just worn out, the next step is a free on-site estimate. Call (855) 912-5373 and we’ll set a time to walk your driveway, check the base and drainage, and give you a written line-item price with no surprises. We cover Richland Hills and the surrounding area, and every project carries the 730-Day Done Right Promise. Ready when you are.
Written by the team at Groundwork Construction Co.












