A Groundwork company - serving Fort Worth, TX
A backyard with a new horizontal privacy fence
Chain Link Fence · Richland Hills, TX

Chain Link Fence in Richland Hills - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Fort Worth
A new white vinyl privacy fence with a double gate
A new stained cedar privacy fence
A remodeled hall bathroom with subway tile and a floating vanity
A garage converted into a guest room and home office
New architectural shingles with a clean valley
A new casement window over a kitchen sink
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

A chain link fence in Richland Hills typically runs $3,500 – $9,000, with most residential lots landing in the $4,200 – $6,800 range depending on linear footage, height, and whether you’re replacing an old fence or fencing open ground. A standard 4-foot residential run goes up in one to two days once materials are on site; taller 6-foot fences with privacy slats take two to three. Call (855) 912-5373 for a free on-site measurement and a written line-item quote.

Call (855) 912-5373

A new wood side gate with black hardware

Every job runs the same five stages. Here’s what actually happens and when you make decisions.

  • Site walk and utility locate (day 1). We measure the run, mark corners and gates, and confirm the property line against your survey. Before any digging, TX811 gets called for underground utility marking, which takes two to three business days in this part of Tarrant County. On tight 76118 lots, we also check where the fence line sits relative to your neighbor’s existing fence or shed.
  • Layout and demolition (day 1, after locate clears). Old fencing, posts, and concrete footings come out. A 150-foot removal typically adds half a day. You decide here whether the old chain link gets hauled off or you keep the panels for scrap.
  • Post setting (day 1 – 2). Line posts go in at 8 to 10 feet on center, terminal posts at corners and gates, each set in concrete. This is where the fence either holds up for 20 years or leans after the first clay-soil shift. Posts cure overnight before any tension is applied.
  • Top rail, fabric, and tension (day 2 – 3). Top rail gets cut and coupled, fabric is stretched and tied off with tension bars and bands. You choose fabric height, gauge, and whether you want a bottom tension wire for dogs.
  • Gates and walkthrough (day 3). Gate frames hang, latches align, and we walk the whole run with you. Any sag, gap, or loose tie gets fixed before we leave.

Our technicians have up to 12 years of experience setting posts in North Texas clay, and every job is covered by our 730-Day Done Right Promise. If a post leans or a gate drops in that window, we come back and make it right.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Chain link is a simple product, but the spec decisions are where a fence either lasts or looks tired in five years. Here’s what you’re picking between:

  • Fabric gauge. 11.5-gauge is the residential standard and holds up fine for most yards. 9-gauge is heavier, resists dog damage and hail better, and adds roughly 15 – 25% to material cost. Worth it if you have large dogs or a corner lot with kids.
  • Height. 4-foot is code-typical for front and side yards in Richland Hills; 6-foot is the common backyard privacy height. Going taller usually needs a neighbor conversation and, in some cases, a permit.
  • Coating. Galvanized is the budget choice and rusts faster in humid stretches. Vinyl-coated (typically green or black) costs more up front but adds years in our climate and looks less industrial against a brick ranch house.
  • Privacy slats. Inserted into the fabric for screening. Costs roughly $1.50 – $3.00 per linear foot installed and cuts wind load noticeably, so post spacing and concrete volume have to be spec’d for it.
  • Gate hardware. Residential pivot hinges versus self-closing kits. Self-closing matters if you have a pool or a dog that bolts.

Post material matters too. Schedule 20 galvanized pipe holds up better than the thin-wall tubing some outfits use, especially where clay movement stresses the concrete collar.

A wood double vanity with two mirrors after a bathroom remodel

Expect $3,500 – $9,000 for a typical residential chain link fence in Richland Hills. Here’s what moves the number:

Line item Typical range
4-foot galvanized, 150 linear feet $3,500 – $5,000
6-foot vinyl-coated, 150 linear feet $5,200 – $7,400
Privacy slats (added) $1.50 – $3.00 / linear ft
Old fence removal and haul-off $300 – $800
Single walk gate $250 – $550
Double drive gate $600 – $1,400

The variables that push a job to the high end: total linear footage (a quarter-acre lot versus a half-acre lot is a real jump), number of corners and gates, heavy clay digging that requires a gas auger or rock bar, vinyl coating versus bare galvanized, and whether old concrete footings have to be broken out. What’s included in our written estimate: posts, fabric, top rail, tension bars, concrete, gate hardware, haul-off, and permit if one is required. What’s typically not: property line survey (we use yours), landscaping restoration beyond basic seed and straw, and any fence work on a neighbor’s side of the line.

Upfront pricing, no surprises. The number in your estimate is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Richland Hills is a small, fully built-out inner-ring suburb, and that changes this job. Lots in 76118 are mostly tight, platted in the 1950s – 1970s, and the housing stock is mid-century brick ranch with pier-and-beam or slab foundations. When we set posts along a property line here, we’re almost always working within a few feet of an existing fence, a shed, or a neighbor’s mature pecan. Post spacing and gate swing have to be measured, not assumed.

The other local reality is the clay. The shrink-swell soil across Richland Hills and neighboring Haltom City expands and contracts with the drought-and-rain cycle, and alone that will heave a badly set post within a couple of seasons. We set terminal posts deeper and use a wider concrete collar than the minimum, which is the difference between a fence that stays plumb through a dry summer and one that doesn’t. If a fence run is part of a Fence Installation in Richland Hills scope that includes grading or a new shed pad, we coordinate the two so the post line isn’t disturbed after the fact.

Permitting runs through the city, and a fence over 6 feet or one on a corner lot may require a permit and inspection. If you’re also planning a backyard structure, homeowners often pair a chain link perimeter with ADU Site Prep & Utilities in Richland Hills so the fencing and utility trenching happen in one pass rather than tearing up finished work.

Most calls we get in Richland Hills fall into four buckets:

  • Replacing a 20-plus-year-old rusted run. The posts have rusted through at the concrete line and the fabric is sagging. We tear out, reset, and rebuild in two to three days.
  • Fencing an open backyard after a purchase. New homeowners on a mid-century lot need a full perimeter, often with one drive gate. Usually one to two days.
  • Adding a dog run or side-yard barrier. Short runs, 6-foot height, with a self-closing gate. Half-day job.
  • Fencing a corner lot for privacy or pool code. Taller run, more corners, often with privacy slats. Two to three days and, typically, a permit.

Serving Richland Hills, TX – Our Local Coverage Area

We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

A finished backyard cottage with a small covered porch

Call (855) 912-5373 and a live person answers, day or night. We’ll set a time to walk your property, measure the run, check the property line, and hand you a written line-item estimate with the post spacing, gauge, and gate hardware spelled out. No pressure, no vague bids. If the project grows into a broader scope, our fence installation service covers it, and homeowners finishing the backyard often pair this with Door Installation in Richland Hills. We serve all of Richland Hills and the surrounding Tarrant County area.

Written by the team at Groundwork Construction Co.

Why Richland Hills Chooses Groundwork Construction Co. of Fort Worth

We set the standard for chain link fence in Richland Hills.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Richland Hills

Getting your chain link fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your chain link fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chain link fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Richland Hills Customers Say

Trusted by homeowners across Richland Hills and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."

Dev Sharma
★★★★★

"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."

Laura Bennett

Ideas for every part of the house

Kitchens, baths, roofs, windows, fences and patios: the projects that make a house work better inside and out.

Read our project guides
A new front entry door with glass sidelightsA new curved paver walkway to the front porchA galley kitchen opened up to the dining room with a new peninsulaA walk-in shower with large-format tile and a built-in nicheA remodeled family room with new windows and a window seatA standing-seam metal roof over a covered porch

More services in Richland Hills

Every project below starts the same way: a free on-site visit and a written price.

Getting started with Groundwork in Fort Worth

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead walking the house with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A crew arriving at a home with materials and tools

Your Fort Worth team

A local vetted partner works across Fort Worth and the towns around it, to the same written standard as every Groundwork job.

Areas we serve
A worker laying floor protection before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise

Ready for Chain Link Fence in Richland Hills?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Richland Hills.

(855) 912-5373

Request a Free Estimate in Richland Hills

Tell us about your chain link fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch