







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Richland Hills, TX: What the Job Actually Involves
Door installation in Richland Hills typically runs $650 to $2,400 per opening for an exterior door and $350 to $1,100 for an interior door, and most single-door jobs wrap in one day on site. The number moves with door type, wall condition, and whether the rough opening needs work. Call (855) 912-5373 for a free on-site estimate. On acreage properties with detached workshops, we size the hardware for the door, not the other way around.
How We Run a Door Installation in Richland Hills, Stage by Stage

Here’s the real sequence. Not every job touches every stage, but this is the order we work in and what you decide at each point.
- Stage 1: Measure and plan (day of estimate). We measure the rough opening, check the wall for plumb and the sill for rot, and confirm swing direction. You decide door type, material, and hardware finish here. On an oversized shop door, we also measure the header and confirm the opener or closer spec while we’re standing there. This takes about an hour.
- Stage 2: Order and permit (3 to 10 business days). Standard pre-hung units arrive fast. Custom sizes, wood doors with a stain finish, or heavy-duty commercial-grade shop doors take longer. We pull the permit if the job requires one so the municipal inspection is in the sequence from the start. You decide the finish before we order, because a stain-grade door can’t be changed after the fact.
- Stage 3: Tear-out and prep (half a day). We cut the old door and frame out, check the framing and header for damage, and repair rotted sill or subfloor before anything new goes in. This is the stage that surprises people. In Richland Hills, a 1950s ranch door often hides undersized framing or loose brick veneer. We tell you what we find and what it costs before we keep going.
- Stage 4: Install and seal (one day on a standard door, up to two on a heavy shop door). We set the unit level, shim it, anchor it, and insulate the gap. We hang the door, adjust the strikes, and check the swing. Then flashing, caulk, and exterior trim. That last step is what keeps North Texas spring wind and hail-driven rain out of the wall.
- Stage 5: Hardware, weather-strip, and walkthrough (2 to 3 hours). We set the lockset, deadbolt, and closer or screen, install weather-stripping, and test the full swing through the range. You walk it with us, and the written workmanship warranty goes on file. You decide nothing here except whether you’re happy. If you’re not, we fix it.
That’s the whole sequence for a single door. A multi-door package runs the same stages back to back and adds a day or two. For a workshop or oversized door, we add a hardware-fit check before stage 4 because a door that heavy punishes a sloppy hinge.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between Before We Order
Door installation is mostly a decision problem, and most of the cost lives in the choice. Here’s the honest trade-off on each.
- Steel exterior doors ($400 to $1,200 installed). Tough, secure, and the most common choice for a front entry. They can dent over time, and the finish needs repainting eventually. They suit most Richland Hills front doors and hold up to hail better than wood.
- Fiberglass exterior doors ($500 to $1,600 installed). Holds a stain or paint finish, resists dents, and handles heat and humidity better than wood. It’s the low-maintenance pick if you don’t want to repaint in five years. It costs more up front than steel.
- Solid wood doors ($900 to $2,400+ installed). The best look on a mid-century ranch, and the priciest. Wood moves with the seasons, so it needs staining and periodic care. Suit it to a heritage home where the look is the point.
- Heavy-duty workshop and oversized doors. A detached shop needs a door rated for its size. A hollow-core interior door won’t work. We spec a solid-core or steel unit with commercial-grade hinges and a closer sized to the slab. This is the acreage-property upgrade we see the most, and it costs more but stops the “door sagged on the third slam” problem.
- Interior doors ($350 to $1,100 installed). Hollow-core for closets and non-demanding interior spaces, solid-core for bedrooms and baths where quiet matters. Pre-hung saves labor. Slab doors cost less but take longer to fit and often need the existing frame rebuilt.
Other parts and hardware come from trusted names in their categories. Schedule 40 or similar hardware from established suppliers gets the job done, and we don’t substitute a brand you didn’t agree to. If you’re pairing the entry upgrade with anything else, our Windows & Doors team can scope it, and many homeowners pair a new door with a wider project coordinated through Windows & Doors in Richland Hills.
What Door Installation Costs in Richland Hills, TX

Exterior door installation runs $650 to $2,400 per opening, and interior doors run $350 to $1,100 each. A detached workshop door with commercial-grade hardware can reach $3,000. Here’s the line-item view.
| Item | Typical range |
|---|---|
| Interior door (hollow-core, pre-hung) | $350 – $750 |
| Interior door (solid-core) | $550 – $1,100 |
| Steel exterior door, installed | $650 – $1,200 |
| Fiberglass exterior door, installed | $800 – $1,600 |
| Solid wood exterior door, installed | $1,400 – $2,400 |
| Oversized shop door with commercial hardware | $1,800 – $3,000 |
| Rough-opening repair or framing fix | $200 – $900 |
What pushes a job to the high end: an oversized or non-standard opening, rot or framing damage found during tear-out, a stained wood finish instead of paint, commercial-grade hardware, or a permit that requires an inspection sequence. What keeps it low: a standard pre-hung unit in a sound opening with no structural surprises.
A written estimate from us lists the unit, hardware, labor, disposal, and permit line by line. What it doesn’t cover is what we can’t see until the wall opens. We quote that repair in writing before doing it, so there are no surprise line items. The price you see is the price you pay. For the full picture of how a door ties into a larger project, see Richland Hills.
See the difference
Before
After
Before
After
Before
AfterWhat Richland Hills Homes Do to This Job
Richland Hills is a small, fully built-out inner-ring suburb of Fort Worth, mostly built between the 1950s and 1970s. That means most of our door work here is a tear-out, not a first install, and the walls behind the trim were not framed for today’s doors. On these mid-century brick ranches with pier-and-beam or slab foundations, opening a door frame often turns up undersized headers, loose brick veneer, and dated wiring running too close to the opening. We plan for the repair, quote it before we start, and keep the municipal inspection in the sequence from day one.
The clay soils across Richland Hills and neighboring Haltom City shift with the drought cycle, and that movement shows up at the door first: a frame that was square in 1972 is often out of plumb now. We set the unit to the existing wall and shim the difference, which is why an older Richland Hills door can take longer than the same door in a newer house. The North Texas hail and spring wind also means an exterior door needs a proper flashing and weather-strip job, not just a bead of caulk. Tying the door into a wider scope? Homeowners often pair this with Cabinets & Countertops in Richland Hills or a Garage Conversion ADU in Richland Hills, and we coordinate all of it under one scope and one warranty.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in Richland Hills

A standard door installation takes one day on site, from tear-out to walkthrough. Custom sizes, heavy shop doors, or a job that turns up framing damage can run to two days. Ordering and shipping add 3 to 10 business days before we start. Call (855) 912-5373 for a schedule confirmed against your door.
Replacing a door in the same opening usually does not need a permit, but enlarging an opening, cutting a new one, or altering structure does. We check the requirement for your address, pull the permit if the job needs one, and keep the inspection in the sequence. Call (855) 912-5373 and we’ll tell you what your job requires.
Yes, most door replacements fit the existing opening and leave plumbing and structure alone. If the opening is undersized or out of square, we repair the framing around it without relocating plumbing. Anything beyond that gets quoted in writing before we proceed. Call (855) 912-5373 to confirm what your opening needs.
Exterior doors run $650 to $2,400 and interior doors $350 to $1,100 each, with a heavy shop door reaching $3,000. Material, opening condition, finish, hardware grade, and permit scope drive the number. Call (855) 912-5373 for an exact quote. Estimates are free.
Every door installation is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right for two years. That covers the install, the hardware set, and the sealing. Our technicians have up to 12 years of experience, they’re background-checked, and they arrive in uniform. Call (855) 912-5373 to get your estimate on the books.
Get a Free Door Installation Estimate in Richland Hills
Call (855) 912-5373 to schedule a free on-site estimate for door installation in Richland Hills. We answer with a live person, any hour, and we’ll measure your opening, walk the options, and hand you a written line-item quote. No pressure to book, no vague numbers. The 730-Day Done Right Promise backs the work in writing. Estimates are free.
Written by the team at Groundwork Construction Co.












