







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Haltom City: What It Costs and How Long It Takes
Asphalt Driveways & Resurfacing in Haltom City, TX typically runs $3,500 – $9,000 for a full new asphalt drive, and $250 – $700 for a reseal coat on a drive that’s still structurally sound. Most residential jobs take two to four days from demo to drivable surface, with a longer cure window before you park heavy vehicles on it. Call (855) 912-5373 and we’ll walk your drive, measure it, and give you a written number.
Day by Day: How an Asphalt Drive Gets Built Here

An asphalt drive isn’t poured and forgotten. It’s a layered system, and each layer has to cure or compact before the next one goes down. Here’s the sequence we run, and what you’ll be deciding along the way.
Day 1: Tear-out and grading
We strip the old surface down to subgrade, haul it off, and shape the base so water runs away from the house and toward the street or a drainage swale. On the older Haltom City lots, this is also where we find out what’s under there – old concrete pads, brick borders, tree roots, or a carport slab somebody poured in 1968. You’ll decide then whether we remove and replace the base or just re-grade what’s sound.
Day 1 – 2: Base prep and compaction
We lay crushed stone base and compact it in lifts, typically 4 to 6 inches for a residential drive. Compaction is the part nobody sees and the part that determines whether your drive cracks in three years or lasts twenty. On Haltom City’s expansive clay, base thickness and drainage matter more than they do on sandy ground – the soil moves with the seasons, and a thin base will telegraph every heave.
Day 2 – 3: Asphalt placement
Hot-mix asphalt goes down at 2 to 3 inches compacted depth for a residential drive, rolled while it’s still hot. You’ll choose the mix grade here; a standard surface mix is fine for most driveways, but a heavier binder course makes sense if you park a work truck or a trailer on it.
Day 3 – 4: Edging and cleanup
We finish the edges, clean the site, and hand you a cure schedule. Stay off it with vehicles for about 72 hours in warm weather. If the work is part of a full Driveway & Pavers in Haltom City project, we sequence the asphalt with any apron, walkway, or border work so nothing gets torn up twice.
Week two onward: Cure and seal timing
Fresh asphalt stays soft through its first summer. We tell homeowners to wait 6 to 12 months before the first seal coat, then reseal every 2 to 3 years after that. Sealing too early traps oils and solvents that need to escape.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices That Actually Matter on an Asphalt Drive
- New build vs. overlay (resurfacing). An overlay adds 1.5 to 2 inches of new asphalt over a sound, cleaned base and costs meaningfully less than a full tear-out. It only works if the subgrade and base are intact. On a 1960s Haltom City drive with alligator cracking and settling, an overlay is money thrown away – the cracks come right back through.
- Base thickness and material. Flexible base stone runs deeper on clay than on stable soil. Thicker base adds cost but is the single best defense against the movement that North Texas clay puts under every drive.
- Mix grade. Standard surface mix suits cars. A heavier mix stands up to trucks, RVs, and trailers – worth it if your drive doubles as a work pad, which is common on the blocks where people keep a shop or a converted garage.
- Edge treatment. Asphalt edges crumble without restraint. We set a concrete or stone edge, or tie into existing curbing, so the drive holds its line instead of raveling at the margins.
- Seal coat. A quality sealer with aggregate resists UV and slows oxidation. Cheaper sealers look great for one season and wear thin.
- Drainage additions. A channel drain or a swale may be needed where the drive meets the garage slab or where the lot slopes back toward the house.
What Asphalt Driveways & Resurfacing Costs in Haltom City, TX

Here’s where the numbers land for the Haltom City market, so you can budget before anyone shows up.
- Asphalt driveway paving (new): $3,500 – $9,000
- Driveway sealing: $250 – $700
- Driveway replacement (full tear-out and rebuild): $5,000 – $14,000
What pushes a job toward the low or high end:
- Square footage. A single-car drive is a very different number than a long double-wide run to a detached shop.
- Existing condition. A clean overlay is cheaper than hauling off 4 inches of failed concrete and rebuilding base.
- Base and grading needs. Regrading for drainage or removing buried debris adds labor and haul-off.
- Access. Tight lots, alley-load setups, and drives with no room for a dump truck to turn slow the job and add cost.
- Drainage work. A channel drain or catch basin is a line item, not a surprise.
A written estimate from us lists tear-out, haul-off, base depth, asphalt thickness, edging, drainage, and the seal schedule separately. What it won’t include unless we quote it: utility relocation, retaining walls, and any work the city requires beyond standard permitting.
See the difference
Before
After
Before
After
Before
AfterWhat Haltom City Homes Specifically Do to This Job
Haltom City is a heavily industrial, blue-collar inner-ring Fort Worth suburb, and its housing was largely built by the families who worked the surrounding factories and warehouses. That history sits in the pavement. On the older blocks around the 76117 core and along the NE 28th/Belknap corridor, we routinely find multiple generations of homeowner add-ons – a carport that got enclosed, a garage converted to a room, a lean-to shop built behind the house – and each one changed where the drive goes and what’s buried under it. We’ve pulled up drive surfaces sitting on top of old concrete, brick, and gravel laid by people who fixed rather than moved.
The climate compounds it. North Texas heat, expansive clay, and hail-prone spring storms mean foundations shift and exterior surfaces take a beating. Asphalt flexes with that movement better than concrete does, which is one reason it holds up on these lots – but it still needs a properly compacted base and a drainage plan. Because many of these are owner-occupied homes that get repaired rather than replaced, code enforcement on aging structures is a real factor; a drive that ties into a converted garage or carport sometimes means bringing that addition up to current city code before we finalize the layout. You can see the broader scope on our Haltom City service-area page.
Serving Haltom City, TX – Our Local Coverage Area
We serve Haltom City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Haltom City

Most residential asphalt driveways take two to four days from tear-out to a drivable surface, plus about 72 hours of cure before you park on it. A simple overlay can be faster; a full rebuild with base work and drainage runs closer to the four-day mark. Call (855) 912-5373 for a schedule that fits your lot.
Paving within your existing footprint usually doesn’t require a permit, but widening a drive, changing curb cuts, or altering drainage often does. We check what the city requires for your specific address before work starts, and we pull what’s needed. Call (855) 912-5373 and we’ll confirm for your street.
Resurfacing works when the base is sound and the damage is surface-level; it’s a waste of money if there’s alligator cracking, settling, or base failure underneath. We assess the base before we quote either option. Call (855) 912-5373 for an honest read on which way to go.
An overlay typically costs less than a full replacement, which runs $5,000 – $14,000 depending on size and condition. Sealing a sound drive runs $250 – $700. Call (855) 912-5373 for an exact quote – estimates are free.
Every asphalt project is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and the price you’re quoted is the price you pay. Call (855) 912-5373 to schedule your free estimate.
Get a Written Number for Your Drive
We’ll walk your Haltom City drive, check the base, measure the run, and hand you a line-item estimate at no cost – tear-out, base, asphalt, edging, and drainage spelled out. No change orders after the fact. If you’re also fencing the yard or prepping ground for a shop or unit, homeowners often pair this with Chain Link Fence in Haltom City or ADU Site Prep & Utilities in Haltom City. Call (855) 912-5373 – a live person answers, 24/7 – or look at our Driveway & Pavers service for the full picture.
Written by the team at Groundwork Construction Co.












