







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Fort Worth: What It Costs and How It Holds Up
Asphalt driveways & resurfacing in Fort Worth typically run $3,500 – $9,000 for a new paved drive, while a straightforward resurfacing job lands at $5,000 – $14,000 as part of a full replacement when the base has failed. Most residential drives take 2 – 4 days from grading to final compaction, and you can usually park on the surface within 48 – 72 hours. Call (855) 912-5373 for a free on-site estimate.
How an Asphalt Driveway Goes In, Start to Finish

We don’t guess at a process. Here’s the real sequence on a Fort Worth job, including the spots where you make a decision.
Stage 1: Site check and measurement (day 1, about 90 minutes)
We walk the existing drive, probe the base, and note drainage. On older Fort Worth properties this is where we find the surprises: buried concrete from a previous pour, tree roots pushing up through a clay base, or a slope that’s been dumping water against the garage slab for years. You’ll get a written line-item quote before anything gets moved.
Stage 2: Demolition and excavation (day 1 – 2)
Old asphalt, failing concrete, or both come out. We dig down to a stable subgrade, typically 6 – 8 inches below finished grade for a residential drive. This is where the job either lasts 15 years or fails in three; the base does most of the work. You’ll decide the depth here based on what you drive and how many vehicles sit on it.
Stage 3: Base and grading (day 2)
We lay and compact crushed stone in lifts, working it to a slope that sheds water away from the house, usually a 2% pitch. In Fort Worth’s black clay, that slope matters more than the asphalt itself; when the soil swells and moves, water needs somewhere to go. Compaction happens in passes with a plate and roller, not one lazy sweep.
Stage 4: Paving the asphalt (day 2 – 3)
Hot-mix asphalt goes down at 2 – 3 inches compacted thickness for a residential drive, rolled while it’s still hot. Your choice here is standard vs. a heavier commercial-grade mix for driveways with heavy trucks or RVs. Paving in North Texas heat is actually a help; the mix stays workable longer and compacts better.
Stage 5: Curing and seal (day 3, seal at 6 – 12 months)
The surface cures over 24 – 72 hours before you park on it. We recommend a first seal coat after 6 – 12 months once the asphalt has fully cured, then every 2 – 3 years after that. Skipping the seal is the single fastest way to shorten the life of a new drive.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Weigh Before We Break Ground
- New asphalt over a rebuilt base ($3,500 – $9,000). The full job, and the one that lasts. Best when the base is failing along with the surface.
- Overlay / resurfacing ($5,000 – $14,000 as part of a replacement). A fresh asphalt layer over a sound base. Cheaper up front, but only honest when the existing base passes a probe test; over a cracked, shifting base it just cracks again.
- Standard vs. heavy-duty mix. Standard mix suits cars and light trucks. Heavy-duty costs more but handles an RV, a work trailer, or a daily high-clearance truck without rutting early.
- Edge treatment. Asphalt edges erode fast in Fort Worth soil. A compacted gravel shoulder or a concrete curb along the edge holds the drive in place.
- Drainage additions. A channel drain or French drain at the low corner solves a water problem before it undermines the base. Worth the extra line item if the drive slopes toward the house.
Our technicians have up to 12 years of experience reading base conditions and telling you honestly which of these you actually need.
What Asphalt Driveways & Resurfacing Costs in Fort Worth, TX

Here’s the number most homeowners want first: $3,500 – $9,000 for a new asphalt drive, $5,000 – $14,000 when the job is a full replacement, and $250 – $700 for a seal coat on an existing drive. Those spreads come from five real variables.
- Square footage. A single-car drive sits near the low end; a long double-width drive pushes toward the high end.
- Base condition. A failed base means excavation and haul-off, which adds real money.
- Access. A narrow side yard or a tight gate slows the equipment and adds labor.
- Mix grade. Heavy-duty asphalt costs more than standard.
- Drainage work. A channel drain or regrade is added scope, priced separately.
Every quote is written line-item with upfront pricing; the number you see is the number you pay. The estimate includes excavation, base, asphalt, and compaction. It typically excludes landscaping repair along the edges and the first seal coat, which we schedule separately once the asphalt cures.
If the driveway is part of a bigger hardscape plan, our Driveway & Pavers in Fort Worth page covers the full scope, and you can see the whole service set on our Driveway & Pavers hub.
See the difference
Before
After
Before
After
Before
AfterWhat Fort Worth Homes Specifically Do to This Job
Fort Worth is a two-speed building town, and asphalt work feels it. Out past Loop 820 toward Alliance and Walsh Ranch, we’re paving fresh drives on new slab-on-grade builds where the base is clean and predictable. Ten minutes away in Fairmount or Ryan Place, the same job runs into pier-and-beam bungalows, century-old alley access, and design-review overlays that can stall a permit even on a straightforward driveway. The other factor is the soil: North Texas black clay expands and contracts with every wet-dry cycle, so foundation-style movement under a drive is normal here and a shallow, well-compacted base built to shed water is what survives it. Spring hail and straight-line wind events also crack and scar asphalt regularly.
We cover all of Fort Worth, and we see the same failure patterns in Haltom City, Forest Hill, and Saginaw. Homeowners often pair a new drive with a Chain Link Fence in Fort Worth to define the property line, and when a property is prepping for a future outbuilding, we handle the ground work through our ADU Site Prep & Utilities in Fort Worth service.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Fort Worth

Most Fort Worth asphalt drives take 2 – 4 days, and you can park on the surface 48 – 72 hours after the final roll. A simpler resurfacing job can wrap in a day or two, while a full replacement with a failing base takes toward the longer end. Weather drives the schedule; we don’t pave in standing water or heavy rain.
Many residential driveway replacements need a permit, depending on whether you’re touching the approach at the public right-of-way or the driveway crosses a sidewalk. In the historic districts (Fairmount, Ryan Place, the Stockyards), a district review can add time. We pull the permits and handle the inspection, and we’ll tell you exactly what your job requires at the estimate.
Resurfacing is honest only when the existing base is sound. We probe it first; if the base has shifted, cracked through, or is holding water, an overlay will crack again within a season. When the base is sound, an overlay saves money. When it isn’t, a full replacement is the only option that lasts.
Usually yes, and that’s why we check the base before recommending. A resurfacing job as part of a replacement runs $5,000 – $14,000, while a fresh drive on a rebuilt base runs $3,500 – $9,000. A seal coat runs $250 – $700. The trade-off is longevity: a proper rebuild buys you a decade-plus, and an overlay over a tired base buys you a lot less.
Every asphalt job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. If a pothole, edge failure, or compaction problem shows up, the fix is on us, not on your wallet.
Get Your Free Asphalt Estimate in Fort Worth
Call (855) 912-5373 to schedule a free on-site estimate for asphalt driveways & resurfacing in Fort Worth. A live person answers around the clock, so there’s no voicemail loop. We walk the drive, probe the base, and hand you a written line-item quote with upfront pricing. Our technicians are background-checked and arrive in uniform. Financing is available at 0% for 18 months, plus $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.












