







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Forest Hill, TX: What the Job Actually Costs
Asphalt Driveways & Resurfacing in Forest Hill runs $3,500 to $9,000 for a new asphalt driveway, and a resurfacing overlay on a sound base usually lands between $1,800 and $4,500 depending on square footage and how much base repair the old surface needs. Most Forest Hill jobs are complete in two to three working days once the weather cooperates. Call (855) 912-5373 for a free on-site estimate, and we’ll walk the driveway with you before quoting a number.
How We Run an Asphalt Job, Start to Finish

An asphalt driveway isn’t a one-day pour. It’s a sequence, and skipping any stage is how driveways fail two summers later. Here’s the actual order of work on a Forest Hill job.
Stage 1: Site walk and measurement (day before work starts)
We measure the square footage, check the slope and drainage away from the house, and probe the existing base. On a resurfacing job, we check for alligator cracking, rutting, and oil spots that tell us whether an overlay will hold or whether the base needs rebuilding. This is where you decide the scope: overlay versus full removal and new asphalt.
Stage 2: Demolition and haul-off (day 1, morning)
On a replacement, we break out the old asphalt and load it. Forest Hill’s 1950s plats mean narrow residential streets, mature trees, and tight front yards, so we plan where the dump trailer sits before the first pickaxe swings. Expect three to five hours of noise and dust. You’ll need cars off the driveway by 7 a.m.
Stage 3: Base prep and grading (day 1, afternoon through day 2)
This is the part you can’t see and the part that determines whether the driveway lasts. We grade and compact the subgrade, add crushed stone base where it’s thin, and check the slope so water runs to the street and not back toward the foundation. On Forest Hill’s expansive clay, that means compacting in lifts and correcting any soft spots rather than paving over them.
Stage 4: Paving and rolling (day 2 or 3, morning)
Hot-mix asphalt goes down at the right temperature and gets rolled while it’s still workable. For a resurfacing job, we clean and tack the existing surface, fill cracks, then lay the overlay. You’ll pick the mix and thickness here: 2 inches is standard residential; 3 inches holds up better under heavy trucks or a wide driveway apron.
Stage 5: Cure and seal (day 3, plus a waiting period)
Keep vehicles off for 24 to 48 hours and heavy loads off for a week. A first seal coat usually waits four to twelve months so the asphalt oils cure out. That seal coat is a separate line item, and we quote it up front rather than springing it on you later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Be Making
- Overlay vs. full replacement: An overlay costs less and goes in faster, but only works if the base is sound. If the old asphalt is cracked through to the base, overlaying is throwing money at a failing slab.
- Asphalt thickness: 2 inches is the residential standard; 3 inches costs more but resists rutting, especially in North Texas heat.
- Hot-mix vs. cold-patch repair: Hot-mix is the real fix; cold patch is a temporary stopgap for a pothole until we can schedule the permanent repair.
- Edge treatment: A compacted stone shoulder or a concrete curb keeps edges from crumbling. Worth the small upcharge on a driveway that meets a lawn.
- Seal coat schedule: Every two to three years is the maintenance rhythm. Skipping it lets UV and water eat the binder.
If your plans are wider than the driveway itself and include hardscape or a full exterior redo, that scope lives on our Driveway & Pavers in Forest Hill page; this page stays focused on asphalt.
What Asphalt Driveways & Resurfacing Costs in Forest Hill, TX

Here’s the range you’re working with, and what pushes a job from the bottom to the top of it.
| Line item | Typical Forest Hill range |
|---|---|
| New asphalt driveway | $3,500 – $9,000 |
| Resurfacing overlay | $1,800 – $4,500 |
| Driveway replacement (remove and repave) | $5,000 – $14,000 |
| Seal coat | $250 – $700 |
Four things move the number most. Square footage is the biggest driver: a single-car apron is a very different job from a double-wide with a turnaround. Base condition matters enormously – if we have to excavate soft clay and rebuild, that’s real cost. Thickness and mix grade add on top. And access: a tight Forest Hill lot with a fence, tree, or utility pole in the path means slower haul-off and sometimes hand work.
A written estimate covers demo, haul-off, base prep, asphalt, and rolling. It typically doesn’t cover the first seal coat, which we quote separately, or any utility relocation.
Curious about the wider options? Our Driveway & Pavers service covers the full range of hardscape.
See the difference
Before
After
Before
After
Before
AfterWhat Forest Hill Homes Specifically Do to This Job
Forest Hill is a built-out inner-ring suburb, and almost every driveway we touch is original or second-generation on a small 1950s-60s ranch along the Mansfield Highway corridor in the 76119 ZIP. That housing stock matters to asphalt work in ways a newer suburb’s never would. Those driveways are often narrow, cracked from decades of clay movement, and hemmed in by mature trees whose roots have pushed up the base. North Texas summers with long stretches over 100°F bake the asphalt and soften it, while the drought-to-flood clay cycle heaves and settles the subgrade underneath.
Because the lots are tight and the streets narrow, staging and haul-off are as much a constraint as the paving itself. We plan the equipment footprint before work starts. If you’re pairing this with fencing that’s heaved or leaning, Chain Link Fence in Forest Hill covers that, and if you’re considering a garage conversion or rear addition, ADU Site Prep & Utilities in Forest Hill is where that scope lives – both are often planned alongside a driveway rebuild. We work all over Forest Hill.
Serving Forest Hill, TX – Our Local Coverage Area
We serve Forest Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Asphalt Driveways & Resurfacing in Forest Hill

A new asphalt driveway takes two to three working days from demo to final rolling, with 24 to 48 hours of cure time before you park on it. A resurfacing overlay can finish in one to two days. Weather is the wild card in North Texas, so we schedule around rain. Call (855) 912-5373 to get a realistic date on the calendar.
Replacing or resurfacing an existing driveway in its current footprint usually doesn’t require a permit, but widening the apron or changing how it meets the street often does. We check with the city before we start and pull what’s required. Call (855) 912-5373 and we’ll confirm what your project needs.
Yes, if the base is sound and the cracking isn’t structural. We probe the surface and check for alligator cracking and soft spots before recommending an overlay. If the base has failed, an overlay will crack within a season and a full replacement is the honest call. Call (855) 912-5373 for an assessment.
Resurfacing typically runs $1,800 to $4,500, while a full replacement lands between $5,000 and $14,000 depending on size and base condition. Call (855) 912-5373 for an exact quote – estimates are free and come in writing.
Every project we do is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (855) 912-5373 to talk through what the guarantee covers on your job.
Get a Free Estimate on Your Asphalt Driveway in Forest Hill
Call (855) 912-5373 to schedule a free on-site estimate for Asphalt Driveways & Resurfacing in Forest Hill. A live person answers around the clock, and we’ll set a time to walk the driveway, measure, and put a written number in your hands. No pressure, no vague bids. You’ll know what it costs and what’s included before any equipment shows up.
Written by the team at Groundwork Construction Co.












