







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Richland Hills, TX: What the Job Actually Runs
Paver Driveways in Richland Hills typically cost $7,000 to $18,000 and take four to seven working days from demo to the first drive-on. The number that matters most here is the base: tear out the old slab or gravel, rebuild a proper compacted base, then set the pavers. Call (855) 912-5373 and we’ll walk the driveway with you, measure it, and put the scope in writing before anything gets ordered. Richland Hills lots are tight and mostly built out, so we measure twice and stage materials once.
How We Build a Paver Driveway: Start to Finish
The work runs in five stages. Here’s the honest sequence, and where you have to make a call.
- Day 1: Walk-through and layout. We set stakes and string lines against the garage face, the street apron, and the side lot lines so the run and slope are correct before a shovel moves. You lock in the paver color, pattern, and border band at this point. Changing your mind after materials are ordered costs money and time.
- Days 1 – 2: Demolition and excavation. Out comes the old concrete, gravel, or failing asphalt, plus enough subgrade to build a real base. For a two-car driveway that’s typically one to three truckloads of debris. You don’t need to decide anything here; we just keep a clean path to the street and protect the house.
- Days 2 – 4: Base prep and compaction. This is the stage that decides whether a Richland Hills driveway survives ten North Texas summers. We lay approved base material in lifts, wet it, and compact each lift with a plate or roller, checking grade as we go. Because the clay here moves with every wet-and-dry cycle, the base and the drainage pitch do the heavy lifting later.
- Days 4 – 6: Setting pavers and edge restraint. Pavers go down in the pattern you picked, cut tight at the garage and the apron, with a restrained edge and proper slope so water runs to the street instead of the foundation. You’ll want to be around for a final look at the field pattern before the border goes in.
- Day 6 – 7: Polymeric sand, cleanup, and inspection. We sweep sand into the joints, compact the surface, blow off the dust, and do a final grade check. If the job needed a permit or a driveway apron inspection from the city, that’s the day it clears. You get a walkthrough and the warranty paperwork before we pull off.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Actually Choose Between
Most of the money in a paver driveway sits in the surface material and the base. Here’s what people pick and why.
- Concrete pavers, tumbled or straight-edge. The default for a reason. Interlocking, repairable one unit at a time, and they hold against clay movement better than a poured slab because the joints flex. Straight-edge runs clean and modern; tumbled reads older and softer next to a 1950s brick ranch.
- Clay brick pavers. Classic look that fits the postwar brick houses on these streets, and it ages into a patina concrete never will. Heavier, a little pricier, and the honest trade-off is it takes a real base to stay put.
- Permeable / open-joint systems. Worth considering where the driveway sits low or runoff pools near the garage. Costs more up front, but it gets water off the site instead of ponding it against the slab.
- Color and border band. A contrasting border, a soldier course, or a herringbone field changes the labor and the material count. A simple running bond is the budget pick; a patterned field is the look most people photograph.
- Base thickness and edge restraint. Not glamorous, but this is the difference between a driveway that’s true in year ten and one that’s rutted in year three. We spec base to the load and the soil, not to the cheapest number.
Belgard is a common paver line here, and it holds up; we also work with the other major paver manufacturers when a specific color or texture matters to you.
What Paver Driveways Cost in Richland Hills, TX

Expect $7,000 – $18,000 for a full paver driveway in Richland Hills, and about $4,500 – $14,000 if you’re replacing an existing drive with a simpler surface and less base work. Here’s what moves the number:
- Square footage and layout. A straight two-car run is the low end. Curves, a turnaround, a wide apron, or a narrow tight-lot access all add labor.
- Existing condition. Old concrete comes out easy; root-bound asphalt, buried debris, or a subgrade that’s pumping water doesn’t. That’s the biggest wildcard on these older lots.
- Base and drainage. Thicker base, a French drain, or regrading to move water away from the house adds cost but saves the driveway.
- Paver choice. Concrete pavers sit at the low-to-mid end; clay brick and permeable systems climb toward the top of the range.
- Permits and the apron. Any work touching the public apron or the right-of-way usually needs a city permit and inspection, and that’s a real line item.
A written estimate from us lists demo, haul-off, base, pavers, edge, sand, permit, and cleanup as line items. It doesn’t include landscaping repair, sprinkler relocation, or a new gate unless you ask for it. Upfront pricing, no surprises: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Richland Hills Homes Do to This Job
Richland Hills is a small, fully built-out inner-ring Fort Worth suburb in ZIP 76118, mostly developed in the 1950s through the 1970s, so a paver driveway here almost always means a tear-out of a postwar slab rather than new construction. Lots and setbacks are tight, which makes staging and how a truck turns around as much a part of the job as the pavers themselves. The shrink-swell clay across Richland Hills and neighboring Haltom City is what we plan around: it cracks slabs and heaves driveways, so base and drainage pitch get more attention here than a greenfield job would need. On the original brick ranches, we regularly find the old drive poured tight to the garage with little slope, which is why water stains and foundation cracks show up together. City permitting and code enforcement are hands-on, and work in the Haltom City and HEB ISD corridor means clear plans and an inspection pass, not a shrug. We cover the whole city, and if you’re nearby in Richland Hills and the surrounding area, we’ll come measure. Many homeowners pair this with Door Installation in Richland Hills when the garage and entry trim get refreshed, and some fold it into a wider Driveway & Pavers in Richland Hills plan. If the house needs interior work too, Cabinets & Countertops in Richland Hills is a common add-on. You can also start from our broader Driveway & Pavers service.
Serving Richland Hills, TX – Our Local Coverage Area
We serve Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Richland Hills

Most paver driveways in Richland Hills take four to seven working days. A simple straight two-car run with a clean base can finish in four; a curved layout, heavy demo, or a permit-triggered apron inspection pushes it toward seven. Call (855) 912-5373 and we’ll give you a real calendar window, not a guess.
Work that touches the public apron or the right-of-way usually does, and we handle that pull and the inspection. A driveway fully on your property may not need one, but we confirm with the city before we order material. We don’t hand you a permit packet and wish you luck; it’s part of the job.
Usually no, and we won’t tell you otherwise. On Richland Hills’ clay, a cracked or heaved slab has to come out or the pavers telegraph every crack within a season. We demo to clean subgrade and build the base fresh. That’s why the typical range lands where it does.
Paver Driveways in Richland Hills run $7,000 – $18,000, with the spread driven by square footage, demo, base thickness, and paver choice. Call (855) 912-5373 for an exact written quote; estimates are free and line-itemed, and the number you see is the number you pay.
The whole job is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on base, setting, and finishing. Ask us on the call how it applies to your specific driveway, and get it in writing.
Get a Free Paver Driveway Estimate in Richland Hills
Call (855) 912-5373 and we’ll set up a free on-site estimate for Paver Driveways in Richland Hills. We’ll measure the driveway, check the base and drainage, and hand you a written line-item quote with a real start date. A live person answers, day or night, so you don’t sit in a voicemail until Monday. No deposit to get a price. No surprises once work starts.
Written by the team at Groundwork Construction Co.












