







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Bedford, TX: What the Job Actually Involves
Paver driveways in Bedford, TX typically run $7,000 – $18,000 and take 3 to 4 weeks from demolition to the final round of polymeric sand, depending on square footage, base depth, and whether the old slab or asphalt has to come out. A standard two-car drive with a Cambridge or Oldcastle block goes in faster than a custom herringbone layout with a border band. Call (855) 912-5373 and we’ll walk your drive and give you a written line-item number, free.
How a Paver Driveway Goes In, Stage by Stage

Paver work looks simple from the street. Underneath, it’s a layered system, and the layers decide whether the drive still looks flat in ten years or starts riffling like a washboard. Here’s the real sequence we follow on a Bedford job.
Stage 1: Measure, layout, and the decisions you make upfront
Day one is on paper and on the ground. We measure the drive, check the slope away from the garage, and mark the excavation limits. This is where you pick the paver style, the color, and whether you want a soldier-course border. We also confirm what’s buried under the drive: sprinkler lines, a gas stub, the water main shutoff. Moving a sprinkler head is cheap at this stage and expensive after the base is compacted.
Stage 2: Tear-out and hauling (1 – 2 days)
Old concrete, asphalt, or worn pavers come out and get hauled. We check the subgrade while it’s exposed, because on Bedford’s clay that’s where surprises live. If we find soft spots or old tree roots, we over-excavate and bring in select fill rather than paving over a problem. You approve any added excavation before we proceed.
Stage 3: Base and compaction (2 – 3 days)
This is the part nobody sees and the part that matters most. We lay 4 to 6 inches of crushed stone base, wet it, and compact it in lifts. The drive gets graded so water sheds toward the street or a drainage point, never toward the garage door. Deeper base adds a day and adds cost, but on expansive clay it’s the difference between a drive that holds and one that settles.
Stage 4: Setting bed and paver install (2 – 4 days)
We screed a bed of coarse sand, then set the pavers in the pattern you chose. Borders get cut and fitted, and any curves or radius work get cut on site. This is the stretch where the drive starts looking like a drive. Crew size and square footage drive the timeline here more than anything else.
Stage 5: Edge restraint, sand, and cleanup (1 day)
We set edge restraint along the open sides, sweep polymeric sand into the joints, mist it, and let it cure. Then we clean up, haul the last of the debris, and walk the finished drive with you. Total from demo to walkthrough: 3 to 4 weeks on a typical Bedford two-car drive, longer in spring storm season when rain keeps crews off wet base.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the cost difference on a paver drive comes down to these choices. Each one is a trade-off, not an upsell.
- Concrete pavers (Cambridge, Oldcastle, or similar): The default for a reason. Interlocking units, high compressive strength, and they can be pulled and reset if a utility line ever has to be dug up. Expect the middle to high end of the $7,000 – $18,000 range depending on size and pattern.
- Clay brick pavers: Warmer look, strong color retention in North Texas sun, but higher material cost and a smaller palette. Suits homes where you want a traditional curb appeal.
- Permeable pavers: Open joints and a graded stone reservoir let water drain through the surface. A real option on lots where runoff is a problem, though the base work is deeper and the price runs higher.
- Pattern: Running bond and herringbone are the two standbys. Herringbone interlocks tighter and resists tire push better, but takes more cuts and more labor. A border band or contrasting soldier course is a small labor add for a big visual payoff.
- Base depth: 4 inches is the minimum on stable soil; 6 inches or more is what we recommend on Bedford clay. Skipping depth saves money now and costs more later when the drive settles.
We use Quikrete and Sakrete products for the setting bed and joint sand where they fit the spec, and we’ll tell you honestly when a cheaper base works fine and when it doesn’t.
What Paver Driveways Cost in Bedford, TX

For Bedford, paver driveway installation runs $7,000 – $18,000. A straightforward two-car drive over sound subgrade with a standard pattern lands near the bottom. A larger drive, custom cuts, permeable system, or deep base pushes toward the top.
What moves the number:
- Square footage: The single biggest driver. A one-car drive and a three-car with a turnaround are miles apart in material and labor.
- Tear-out and hauling: Removing an existing concrete or asphalt drive adds demolition and dump fees. A clean site saves.
- Base condition and depth: Soft clay, roots, or a failed prior base means extra excavation and select fill.
- Pattern and cuts: Herringbone, curved edges, and borders add labor.
- Permit and inspection scope: If the drive touches the right-of-way or changes drainage, the city may require a permit and inspection, which we fold into the line-item quote.
Your written estimate lists demo, base, materials, labor, edge restraint, sand, and cleanup as separate lines. What it doesn’t cover: relocating a utility the city has to do, or unforeseen underground damage we couldn’t see at the walk. We flag those in writing before work continues. The number you see is the number you pay on everything we quoted.
See the difference
Before
After
Before
After
Before
AfterWhat Bedford Homes Specifically Do to This Job
Bedford is a built-out mid-cities suburb, which changes how paving work gets done here. In ZIPs 76021 and 76022 the housing stock runs to 1960s – 1980s single-family tract homes and ranch styles, so most drives we replace are original or one generation old, and the subgrade underneath has been settling for decades. On that clay, we often find low spots and old roots that weren’t in the original pour’s plan. We also plan around the calendar: North Texas summer heat makes afternoon pours and sand work slow going, and spring hail season interrupts the schedule, so we build weather days into the timeline. Because Bedford is essentially fully developed, the city’s established permit and inspection process applies rather than greenfield subdivision approvals, and any drive that changes drainage or touches the right-of-way gets reviewed. If your project grows into a full Driveway & Pavers in Bedford scope, that permit picture stays the same. We cover all of Bedford, and homeowners often pair this with Door Installation in Bedford when they’re tightening up the garage and entry at the same time. For the full picture of our Driveway & Pavers service, that page lays out every option.
Serving Bedford, TX – Our Local Coverage Area
We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Bedford

Plan on 3 to 4 weeks from demolition to final sand. Base depth, square footage, pattern complexity, and spring rain days are the biggest variables. Call (855) 912-5373 for a timeline specific to your drive.
Often yes, if the drive changes drainage or touches the right-of-way. Because Bedford is built out, the city’s established permit and inspection process applies rather than new-subdivision approvals. We handle the permit paperwork and inspections as part of the job, and we’ll tell you at the estimate whether yours needs one.
Usually yes. We mark sprinkler lines and the water shutoff before excavation, and we work around beds and trees where the layout allows. Anything that has to be moved gets priced and approved before we start. Call for a free walkthrough.
Most Bedford paver drives land between $7,000 and $18,000. Size, tear-out, base depth, and pattern drive the number. Call (855) 912-5373 for an exact line-item quote, free.
Every paver driveway we install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right, for two full years after we hand you the keys. Calls are answered by a live person around the clock, so a warranty question never waits until Monday.
Get a Free Paver Driveway Estimate in Bedford
We’ll walk your drive, check the base and drainage, and hand you a written line-item estimate with no surprise numbers. That estimate is free, and it covers materials, labor, permit scope, and timeline. Call (855) 912-5373 to schedule. A live person answers, day or night, and we’ll find a time that works for you.
Written by the team at Groundwork Construction Co.












