







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Hurst, TX: What to Expect
Concrete driveway installation in Hurst, TX typically runs $4,500 – $12,000, and most jobs take three to five working days from demo to the day you can park on it. That range covers a standard two-car pour on a lot where the old slab comes out clean. The number moves when the subgrade is bad, the lot is tight, or you want something more than a broom finish. Call (855) 912-5373 for a free on-site estimate before you commit to anything.
How We Pour a Driveway in Hurst, Start to Finish

Concrete work looks simple from the street. It isn’t. Here’s the actual sequence, including where you make decisions.
Stage 1: Walk the lot and set the grade (day 1, about an hour). We measure the run, check where water currently drains, and look at the existing slab’s condition. On a Hurst lot with an old drive, the big question is whether we can pour over a stable base or need to remove the old concrete entirely. You’ll also pick your finish and width here. A standard two-car slab is 20 to 24 feet wide; squeezing to 18 feet saves money but makes daily parking tight.
Stage 2: Demo and haul-off (day 1, most of the day). Old concrete comes out with a skid steer and goes to a recycle yard. This is where we find surprises: buried tree roots, patches of the old driveway that were poured over dirt, soft spots from years of North Texas clay movement. Those change the subgrade prep scope, and we tell you the same day rather than after the pour.
Stage 3: Form, compact, and rebar (day 2). We build the forms, compact the base in lifts, and lay #3 or #4 rebar on a grid. Skip rebar and you get a slab that cracks into sections within a few summers of clay movement. This is not optional on Hurst soil. You’ll see the forms set and can walk the layout before anything gets poured.
Stage 4: Pour and finish (day 3). The pour takes a few hours. Finish choices get made here: broom for grip, light salt for texture, or a saw-cut joint pattern that controls where cracks appear. Saw cuts usually go in within 6 to 12 hours of the pour, on a schedule the crew watches.
Stage 5: Cure (days 4 – 7). You can walk on it in 24 to 48 hours. Drive on it in 7 days. Heavy loads like a concrete truck or a moving van wait 28 days. We tell every homeowner this up front so nobody parks a truck on it too soon.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Broom finish vs. light salt: Broom is the standard, costs the least, and gives solid grip in rain. Salt finish has subtle texture and hides dirt better but adds a bit to the price. Broom is what most Hurst homeowners pick.
- Standard gray vs. integrally colored: Gray is the baseline. Color added to the mix rather than applied on top holds up to sun and won’t flake. Expect a premium of several hundred dollars per thousand square feet.
- Plain slab vs. rebar-reinforced: Rebar costs more than welded wire mesh but pays back in the first decade of North Texas clay movement. We specify rebar on every pour.
- Quikrete vs. Sakrete for patching and small pours: For repairs to aprons and edges, those brands are the standard retail-mix choices. For a full driveway pour we use ready-mix delivered on site, which is a different product altogether.
- Width and length: A 20-foot-wide drive fits two cars comfortably. A 24-foot or wider drive accommodates trailers or three vehicles. Every extra foot of width costs money in concrete, base, and forms.
What Concrete Driveways & Concrete Work Costs in Hurst, TX

Full concrete driveway installation in Hurst runs $4,500 – $12,000. Replacing an existing drive runs $5,000 – $14,000 because demo, haul-off, and base rework add cost. Here’s what moves the number:
- Size: Concrete is priced by the square foot plus a labor minimum. A single-car apron is a small job; a long double drive is not.
- Existing condition: A cracked drive on stable base is cheaper to replace than one sitting on soft or shifting soil. The second case needs subgrade work.
- Access: A narrow lot with a fence, tree, or AC unit in the way slows demo and limits equipment. That shows up as labor, not concrete.
- Finish and reinforcement: Rebar, color, and specialty finishes each add cost. Broom finished with rebar is the best value for most homes.
- Permits: Hurst requires permits for new or expanded driveways in many cases, plus inspection of the base and drainage. We pull the permit and cover the inspection.
A written line-item estimate lists concrete yardage, rebar, base prep, demo and haul-off, formwork, finishing, and permit fees. What usually isn’t included: drainage work beyond what the driveway itself needs, relocating a sprinkler system, or repairing the lawn where equipment tracked. We spell that out so there are no surprise line items later.
See the difference
Before
After
Before
After
Before
AfterWhy Hurst’s Older Lots Shape This Job
Hurst sits in the Mid-Cities, mostly built out between the 1960s and 1980s with brick-veneer ranches and small two-story homes on tight subdivision lots. Almost every driveway job here means tearing out a 40-year-old slab, not pouring on empty ground. That older concrete often hides problems the homeowner can’t see: settling from decades of seasonal clay movement, tree roots pushing up under the slab, and drainage that washed the base out years ago. On lots with mature pecan and oak canopies, limb debris and roots complicate the demo and sometimes force us to shift the pour line a few feet to miss a major root system. Permits go through the city, and inspections cover base prep and drainage before the pour can happen. Homeowners in 76053 and 76054 often pair this with Driveway & Pavers in Hurst when the scope grows to include a walkway or patio.
If your project expands to a detached garage or an ADU, homeowners often pair this with ADU Site Prep & Utilities in Hurst so the flatwork and utility trenches get planned together. And when a driveway replacement turns into a garage door replacement on those older homes, Door Installation in Hurst handles that scope too.
Serving Hurst, TX – Our Local Coverage Area
We serve Hurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Hurst

Plan on three to five working days for the pour plus a 7-day cure before you drive on it. Demo and prep take one to two days, the pour takes a few hours, and the final walk-through happens after saw cuts and cleanup. Call (855) 912-5373 for a schedule on your specific driveway.
Often yes. New driveways, expanded widths, and any change to how water drains off the lot usually require a permit and inspection through the city. We pull the permit and coordinate the inspection so you aren’t chasing paperwork. Call (855) 912-5373 to talk through your specific scope.
Not on our written estimate. We set the number after walking the lot and uncovering the subgrade conditions, then hold to it. The only time we come back to you is if we find something we genuinely couldn’t have seen, like a buried utility or a failed retaining wall, and we explain it before we proceed. Upfront pricing, no surprises. Call (855) 912-5373 for a free estimate.
Sometimes, but rarely worth it. Pouring a 4-inch slab on top of an old cracked one traps the failure underneath and adds height that trips garage door clearances. On most Hurst driveways, full removal and a fresh base is the better long-term choice. We’ll tell you honestly which makes sense for your slab. Call (855) 912-5373.
Our 730-Day Done Right Promise covers workmanship for two years – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction, and it applies to concrete work the same as any other job we do. Call (855) 912-5373 to schedule your free on-site estimate.
Get a Free Estimate on Concrete Driveways & Concrete Work in Hurst
Replacing a driveway is a real project and worth pricing properly. Call (855) 912-5373 and we’ll set up a free on-site estimate – a live person answers, day or night. We’ll walk the lot, measure the run, talk through finish options, and hand you a written line-item quote with a real timeline. Our technicians have up to 12 years of experience on flatwork and site work, and every job carries our 730-Day Done Right Promise. If your scope reaches beyond the driveway, our Driveway & Pavers service covers the rest, and you can see all the Hurst work we take on when you’re ready.
Written by the team at Groundwork Construction Co.












