







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Hurst, TX: What the Job Costs and How Long It Takes
Cabinets & countertops in Hurst typically run $14,000 – $45,000 for a full kitchen’s worth of new cabinetry and stone, with most Hurst homeowners landing between $18,000 and $30,000. Plan on about three to four weeks from tear-out to final caulk, and know that cabinets have to be set and leveled before anyone puts a tape measure on a slab. Call (855) 912-5373 to schedule a free on-site estimate.
How a cabinet and countertop job actually runs, stage by stage

This is the part most bids gloss over, so here’s the honest sequence. Every stage below is a real decision point, and the order matters more than people expect.
Stage 1: Template, measure, and lock the layout (day 1, about 2 hours)
We measure the existing footprint wall to wall and check for out-of-square corners, which is common in Hurst’s 1960s – 1980s ranches. You decide the cabinet style, door profile, and finish at this visit, and you sign off on the layout. Nothing gets ordered until that signature is in hand, because cabinet lead times are the long pole in the whole schedule.
Stage 2: Demo and wall prep (days 2 – 3)
Old cabinets come out, and so does the backsplash if you’re replacing it. We check the wall behind them for water stains, soft drywall, and old outlet placements. On the older Hurst homes we work in, this is also when we find out whether the existing range hood vent actually goes outside or just dumps into the attic. You decide at this point whether to move an outlet, add under-cabinet lighting, or cap an old gas line; each of those changes the electrical and plumbing scope.
Stage 3: Cabinet delivery and installation (days 4 – 6)
Cabinets arrive and get staged. We shim, level, and fasten uppers to studs and base cabinets to each other, then set them against the wall. Crown molding, filler strips, and toe kick come last. You’ll want to walk the room at the end of this stage, because moving a cabinet after the countertop template is a costly correction. If your layout calls for cabinetry over a peninsula or island, that gets built here too.
Stage 4: Countertop template and fabrication (days 7 – 15)
Once cabinets are set and level, the countertop shop templates the actual installed footprint, not the plan drawing. Fabrication runs roughly 7 – 10 business days for quartz and granite, faster for laminate or butcher block. This is the gap where homeowners pick their slab, edge profile, and sink cutout location. Cambria is one of the brands we work with regularly for this stage.
Stage 5: Countertop install, sink, and finish (days 16 – 21)
The slab goes down, the sink and faucet get set, and the dishwasher gets reconnected and tested. Final walkthrough covers door alignment, drawer glide adjustment, caulk lines, and any punch items. Total elapsed time for a straightforward Hurst job: about three weeks. Add a week if you’re relocating plumbing or changing the layout.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually be making, and what each one costs you
Cabinet and countertop selection is where a Hurst budget either holds or drifts. Here’s the real trade-off on each.
- Stock vs. semi-custom cabinets: Stock comes in fixed widths and runs $4,000 – $13,000 installed for a typical kitchen. Semi-custom fills odd gaps and hides out-of-square walls, which matters in older Hurst homes, and sits at the higher end of that range. KraftMaid is a strong middle path here.
- Plywood vs. particleboard boxes: Plywood holds up better against moisture and repeated screw load. Particleboard is cheaper and fine in dry interiors. In a kitchen with a dishwasher and a sink, plywood is the safer call.
- Quartz vs. granite vs. laminate: Quartz runs $2,000 – $6,500 installed and needs no sealing. Granite is in the same range and offers natural variation, but wants periodic sealing. Laminate is the budget play and works fine as a rental-grade choice.
- Edge profile and thickness: A standard eased edge keeps cost down. A waterfall or thick mitered edge adds fabrication labor and visible cost.
- Sink style: An undermount sink changes the countertop fabrication and adds cost versus a drop-in. Farmhouse sinks change the cabinet front entirely.
What Cabinets & Countertops costs in Hurst, TX

The lead range for this job in Hurst is $14,000 – $45,000, with cabinet installation alone running $4,000 – $13,000 and countertop installation $2,000 – $6,500. Where you land depends on five things:
- Kitchen size and cabinet count: A galley kitchen in a smaller Hurst ranch needs far fewer boxes than an L-shaped layout with an island.
- Existing condition: Out-of-square walls, water-damaged drywall, or a floor that’s out of level push prep work up.
- Layout changes: Moving a sink, range, or dishwasher means plumbing and electrical work, and that adds cost.
- Material grade: Stock cabinets and laminate sit at the low end. Semi-custom and quartz climb toward the top.
- Permit scope: A straight cabinet and countertop swap usually needs no permit. Moving plumbing, gas, or electrical does.
A written line-item estimate covers demo, cabinet supply and install, countertop fabrication and install, sink and faucet set, and haul-away. It typically does not cover backsplash tile, new appliances, or flooring, and we say so up front so there are no surprises. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Hurst homes specifically do to this job
Hurst is a mostly-built-out inner-ring Mid-Cities suburb, and nearly all the work here is remodel on 1960s – 1980s brick-veneer ranches, not new construction. That changes the job. In ZIP codes 76053 and 76054, we routinely pull out original cabinets built into a wall with no studs where the layout says there should be, or find a soffit that hides a duct run and limits how tall the uppers can go. Wall flatness is another recurring issue: 50-year-old drywall and settled framing mean a new cabinet run that looks straight on paper shows a gap against the wall unless it’s scribed and filled. Permits go through Hurst’s own city inspections, and the mature pecan and oak canopies that hang over these tight lots mean delivery trucks sometimes can’t get close, so we plan cabinet staging accordingly. If your project grows beyond the kitchen, homeowners often pair this with Garage Conversion ADU in Hurst or a New Detached ADU in Hurst, and the same inspection rhythm applies. We cover all of Hurst and the surrounding Mid-Cities.
Serving Hurst, TX – Our Local Coverage Area
We serve Hurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Cabinets & Countertops in Hurst

Most jobs run three to four weeks from demo to final walkthrough, with countertop fabrication as the longest gap at roughly 7 – 10 business days. Call (855) 912-5373 for a schedule that fits your date.
Usually no, if you’re replacing in the same footprint with no plumbing, gas, or electrical changes. Moving a sink or adding an outlet triggers a permit through Hurst’s inspections. We handle that paperwork and the inspection scheduling for you.
Yes, and most Hurst jobs do exactly that. Keeping the sink and range where they are is the single biggest cost saver, often keeping you well below $20,000. New doors and drawers in the same boxes is another way to cut cost while still changing the look.
Expect $14,000 – $45,000, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500. Call (855) 912-5373 for an exact quote; estimates are free.
Every job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. Your materials also carry their manufacturer warranties, which we walk through at the final walkthrough.
Get a free estimate on your Hurst cabinets and countertops
Call (855) 912-5373 for a free on-site estimate and design consult. A live person answers, and we’ll walk your kitchen, measure the footprint, and give you a written line-item price before you commit. We’ll flag any wall, floor, or plumbing surprises before work starts so there are no change orders later. If you’re weighing a full Kitchen Remodeling in Hurst, our Kitchen Remodeling service covers the wider scope.
Written by the team at Groundwork Construction Co.












