







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Bedford, TX: What the Job Actually Involves
A chain link fence in Bedford, TX typically runs $3500 – $9000 for a standard residential lot, and most installs wrap up in two to four working days once we’ve marked utilities and pulled the permit. You’re getting galvanized steel posts set in concrete, tension wire, top rail, and mesh stretched tight enough that it doesn’t sag by summer. Call (855) 912-5373 and we’ll walk your property line and put a written number in your hands before you commit to anything.
How We Build a Chain Link Fence, Stage by Stage

Every chain link job in Bedford follows the same sequence, and knowing it in advance keeps you from getting surprised mid-project. Here’s what actually happens between the first walk-through and the final walk.
Stage 1: Site walk and layout (day 1, about an hour)
We meet you on-site, walk the property line, and confirm exactly where the fence runs. You’ll make your call on height (4-foot, 5-foot, or 6-foot), gauge of mesh, and whether gates swing or slide. We flag utility locates through the Texas 811 system at this point – that usually clears within 48 hours, and we don’t dig until it does.
Stage 2: Permit and HOA review (day 1 to day 3)
Bedford requires a permit for most residential fence work over a certain height, and the city’s established code and inspection process applies here because there’s essentially no greenfield left to build on. We handle the submittal and schedule the inspection. If your neighborhood has an HOA, you’ll need written approval on height and finish before posts go in – we’ll tell you exactly what to submit.
Stage 3: Demolition and prep (day 1 or 2 of build)
Old fence comes out, posts get set in concrete at the correct depth, and we mark our spacing on 8-foot centers. This is the stage where we hit roots, old sprinkler lines, or buried debris – common in Bedford’s 1960s and 1970s lots. You’ll get a heads-up before we do anything that changes the number.
Stage 4: Framework and mesh (day 2 or 3 of build)
Top rail, tension wire, and mesh go up, and every stretch gets tightened and tied. Gates get hung, latches aligned, and we check the swing. This is where a good install separates itself from a bad one – slack mesh and low tension show up within a season.
Stage 5: Inspection and walkthrough (final day)
City inspection, then we walk the line with you. You check tension, gate alignment, and post plumb. Any punch-list items get handled before we invoice. Our technicians have up to 12 years of experience on chain link work, and every job sits under the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Your Material and Spec Choices, With the Honest Trade-offs
Chain link isn’t one product. The choices you make on the front end affect both price and how the fence looks in ten years.
- Mesh gauge (11.5 vs. 9 vs. 6): 11.5-gauge is the standard residential choice and the most economical. 9-gauge is noticeably heavier and resists dents from kids and dogs. 6-gauge is commercial-grade – overkill for most Bedford backyards but right if you’re enclosing a dog run or a storage yard.
- Post and rail weight: Lightweight posts and rails save money up front but bend under North Texas hail and wind. Heavier schedule posts hold their line. Ask us for the difference in writing before you decide.
- Coating and color: Galvanized steel is the baseline and shows a bright silver finish. Vinyl-coated mesh in black or green costs more but blends with landscaping and feels less institutional. Black-coated chain link in Bedford’s older neighborhoods often reads as a far less visible fence than bare galvanized.
- Height: 4-foot is code-minimum for most side and rear yard work; 5-foot and 6-foot are common for privacy and pet containment. Confirm HOA limits before you commit.
- Gates: Walk gates, drive gates, and double gates are all options. For heavier drive gates, we spec reinforced frames and heavier hinges – a sagging drive gate within a year is almost always undersized hardware.
What a Chain Link Fence Costs in Bedford, TX

The realistic range for a residential chain link fence in Bedford is $3500 to $9000. Most single-family lots land somewhere in that band, and the variables below are what push a job toward the low or high end.
The five factors that move the number:
- Linear footage and corner count: A simple rectangular backyard is cheaper per foot than an irregular property line with multiple corners and returns.
- Height and gauge spec: Going from 4-foot 11.5-gauge to 6-foot 9-gauge is a meaningful jump – not a rounding error.
- Gate count and gate size: Each gate adds hardware, framing, and install time. Drive gates add the most.
- Site conditions: Root obstructions, rock, buried debris, or old concrete footers from a previous fence all add labor. Bedford’s older lots hit this more often than new subdivisions do.
- Permit and HOA scope: A standard residential permit is straightforward. Anything that requires variance or HOA resubmission adds time.
Your written estimate covers materials, posts set in concrete, tension hardware, gates, and haul-away of the old fence. What’s not included: stump grinding, utility relocation beyond standard locates, or landscape repair where posts come out of flower beds. We’ll say so up front instead of surprising you later. Call (855) 912-5373 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Bedford’s Housing Stock Does to This Job
Bedford is a fully built-out mid-cities suburb, which means nearly all the fence work here is replacement rather than new construction. Most of the homes we see in ZIPs 76021 and 76022 were built between the 1960s and 1980s, and their original property lines carry the marks of that era – established trees with root systems right where you want posts, aging sprinkler runs, sometimes an old chain link base or concrete footer still in the ground. Pulling a permit here means working through the city’s established inspection process, not a greenfield subdivision approval. If you’re replacing a fence as part of a wider project, that scope often ties into our Fence Installation in Bedford page. It also means we time installs around North Texas heat and spring hail season, since a stretched chain link mesh that takes a hard hail hit can dimple even 9-gauge steel. Homeowners in established neighborhoods near the Bedford Boys Ranch area and along the Harwood and Shady Brook corridors often pair chain link with other exterior upgrades – a new garage door on a builder-grade opening, for example, or a fresh coat of paint on trim – which is where our Door Installation in Bedford work comes in. For homeowners planning an accessory structure behind the new line, we also handle ADU Site Prep & Utilities in Bedford, and it’s worth coordinating that trenching before the fence goes in. Larger builds that combine fencing with paving or hardscape tend to route through our Fence Installation service, and we cover every corner of Bedford for both.
Serving Bedford, TX – Our Local Coverage Area
We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Bedford

Most residential chain link fences in Bedford are installed in two to four working days once utilities are located and the permit clears. The utility locate and permit steps can add about 48 hours before dig day, so plan about a week from signed estimate to finished fence on a straightforward job.
Yes, in most cases a Bedford fence permit is required for residential chain link work over standard height thresholds. We submit the permit, schedule the inspection, and make sure it passes before we close the job. Call (855) 912-5373 and we’ll confirm what your specific property needs.
We can usually work around sprinkler lines and existing landscaping, but we can’t promise zero disturbance when posts have to go where roots or lines run. We flag conflicts during the utility locate and walkthrough so you know exactly where we’ll dig before any shovel goes in.
A residential chain link fence in Bedford typically lands between $3500 and $9000, depending on footage, height, gauge, gates, and site conditions. Heavier gauge and black vinyl coating push toward the high end. Call (855) 912-5373 for an exact written quote – estimates are free and there’s no obligation.
Every chain link fence we install is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to posts, tension, gates, and hardware as installed.
Get a Free On-Site Estimate for Your Chain Link Fence
Call (855) 912-5373 to schedule a free on-site estimate for your chain link fence in Bedford. We’ll walk the property line with you, measure footage, confirm height, gauge, and gate placement, and put a line-item written price in your hands – no vague ballpark, no change orders once work begins. Calls are answered by a live person around the clock, and every crew we send is background-checked and arrives in uniform.
Written by the team at Groundwork Construction Co.












