







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Bedford, TX: What It Costs and How Long It Takes
Asphalt driveway paving in Bedford typically runs $3,500 – $9,000, and resurfacing an existing asphalt drive usually lands at a smaller fraction of that because the base is already there. Most residential jobs take two to three working days, with a cure window before you park on it. Call (855) 912-5373 for a free on-site estimate and we’ll tell you whether your drive needs a full rebuild or just a new wearing course – that one answer decides the price.
Stage by stage: how an asphalt driveway goes in and comes back to life

Asphalt work is sequential. Skip a stage and it shows up two winters later as cracking, rutting, or a drive that sheds its top layer. Here’s the real order of operations, with the time each stage takes and the decision you make at each one.
Day one, morning: evaluation and demolition
We walk the drive and probe the base to see how much of the old surface is salvageable. If the existing asphalt has structural failures – alligator cracking, sunken areas, a base that’s gone soft – it gets removed, usually with a skid-steer or mini-excavator. If the drive is sound and only surface-worn, resurfacing is a milling-and-overlay job and demolition stays light. You decide at this stage: rebuild the base or overlay what’s there. It’s the biggest fork in the road, and we show you the evidence before you commit.
Day one, afternoon: grading, drainage, and base prep
This is where a driveway earns its lifespan. We re-grade for slope away from the garage and foundation, compact the subgrade, and build the aggregate base in lifts, watering and rolling each one. A proper base runs 4 to 6 inches of compacted crushed stone on a residential drive. Drainage gets sorted here too, because North Texas clay holds water and a flat drive turns into a bathtub. You’ll want to flag any low spots or runoff problems you’ve noticed before we grade past them.
Day two: paving the asphalt
Hot-mix asphalt arrives and gets laid with a paver, then rolled to compact it while it’s still hot. Residential drives usually get 2 to 3 inches of compacted asphalt over the base, or 1.5 to 2 inches when we’re resurfacing over a sound existing surface. Compaction is measured, not guessed. If the mix is laid too thin or rolled cold, it won’t hold up to Bedford summers or a delivery truck.
Day two, evening: edges and cleanup
Edges get tamped and shaped, joints are cleaned, and the site is swept. Any adjacent concrete, landscaping, or fences are protected during the pour, and we walk the finished drive with you before leaving. This is when you’d note anything that needs attention, while it’s fresh.
Days three through thirty: curing and sealing
New asphalt needs time. Keep vehicles off for at least 24 to 48 hours, and heavier vehicles for a week or more. Full cure takes roughly 30 days, so avoid sharp turns, jacks, and heavy point loads during that window. A seal coat goes on after the asphalt has cured, which is where a fresh drive starts to look like a finished drive. We schedule that follow-up so you don’t have to remember it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Asphalt looks monolithic from the street. Up close, there are real decisions that change both the price and how long the drive lasts in Bedford’s heat.
- Full rebuild vs. overlay. A rebuild replaces base and surface and typically runs $5,000 – $14,000 in Bedford. An overlay reuses the existing base and costs less, but only works when the base is still sound. Overlay a failing drive and the cracks telegraph through in a season.
- Base depth and aggregate. Standard residential base is 4 inches of compacted crushed stone; drives that see RV or trailer traffic go to 6 inches. The extra aggregate is the cheapest insurance you’ll buy on this job. We use graded aggregate from suppliers like Oldcastle where it’s available.
- Asphalt thickness and mix. Thicker compacted asphalt resists rutting better in summer heat. Residential drives usually land at 2 to 3 inches; a resurface layer runs thinner. Ask what mix is going in and how thick it will be compacted, not just what it looks like hot.
- Edge restraints. Without a restraint, asphalt edges crumble under tire traffic. A concrete curb or compacted stone shoulder holds the edge on driveways with any grade or tight turn.
- Seal coat timing. A seal coat runs $250 – $700 in Bedford and protects against UV and moisture. New asphalt should cure before sealing, typically a few months out.
Any of these choices gets made with an actual number in front of you, not a shrug and “it depends.” If your project is part of a full Driveway & Pavers in Bedford scope, we’ll price the asphalt portion inside the wider plan so the estimate reads as one document.
What asphalt driveways & resurfacing costs in Bedford, TX

A straightforward new asphalt drive in Bedford runs $3,500 – $9,000. A rebuild that replaces failed base and surface lands in the $5,000 – $14,000 range. Resurfacing an existing sound drive is less. Call (855) 912-5373 for an exact number – the estimate is free and written line by line.
Four things move that number up or down:
- Square footage and access. A 400-square-foot single-car apron is a different job than a long drive to a detached garage. Tight lots where equipment can’t reach add labor to every load.
- Condition of the existing base. Sound base means overlay pricing. Failed base means demo, haul-off, new aggregate, and full paving. That’s the difference between the low and high end of the range.
- Drainage and grading. Driveways that need regrading, a catch basin, or a swale to move water away from the slab cost more upfront and save a foundation problem later.
- Thickness and base depth. Extra aggregate and thicker asphalt are line items, and they’re the reason two “same-size” drives can sit $2,000 apart.
A written estimate should spell out square footage, asphalt thickness, base depth, drainage work, haul-off, and whether a seal coat is included later. Get the asphalt paving side in writing, and ask specifically what’s excluded – landscaping repair, fence removal, and any concrete adjoining the drive are the common gaps.
See the difference
Before
After
Before
After
Before
AfterWhat Bedford homes specifically do to this job
Bedford is built out. Nearly all of the work here in ZIPs 76021 and 76022 is renovation and rebuild, not new subdivision development, which means the driveway you’re pricing sits next to a 1960s-to-1980s tract home with its own base and drainage history. That changes the job in ways a newer suburb wouldn’t. Clay soil under the drive expands and contracts with the seasons, and an asphalt base that wasn’t built to shed water will heave and crack along the same lines the house’s foundation is fighting. We see driveways here that were poured over uncompacted fill, and the failure shows up as spiderwebbed cracking near the garage apron, not out at the street.
Because there’s no undeveloped land left in Bedford, work that touches the right of way or the approach from a public street can run into the city’s established permit and inspection process rather than greenfield approvals – worth confirming before demolition starts. Summer heat also sets the schedule: asphalt crews want to lay in cooler morning hours, and mid-August work moves slower like everything else outdoors in North Texas. If you’re covering a larger exterior scope, homeowners often pair this with Chain Link Fence in Bedford or with ADU Site Prep & Utilities in Bedford so the driveway, drainage, and lot grading get planned together instead of in pieces. Our Bedford service page lays out the neighborhoods we work in, and our Driveway & Pavers service handles the full range of driveway surfaces if you’re still deciding between asphalt and another material.
Serving Bedford, TX – Our Local Coverage Area
We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – asphalt driveways & resurfacing in Bedford

Most asphalt driveways in Bedford take two to three working days from demo to final pass, plus a cure window before heavy vehicles go on. Resurfacing an existing sound drive can finish in a day. The cure is the part most people underestimate: keep cars off for 24 to 48 hours and give the asphalt roughly 30 days to fully cure before sharp turns or point loads. Call (855) 912-5373 and we’ll map your timeline against the weather here.
Whether a permit is required depends on whether the work touches the public right of way, the street approach, or drainage tied to the lot – work inside your own property line often doesn’t need one. Because Bedford is fully built out and governed by the city’s established building code, the approach and any drainage tie-in are worth confirming before demo. We handle that check as part of the estimate so it’s settled before the first load of asphalt shows up.
You can resurface without a full tear-out when the base is still sound and the surface damage is cosmetic – surface wear, minor cracking, no soft spots. If the base has failed or the asphalt has alligator cracking, an overlay will telegraph the old cracks within a season. We probe the base before quoting so you get a straight yes or no instead of a guess. Call (855) 912-5373 for an honest assessment.
Resurfacing runs less than a full rebuild because the base stays and only the wearing course goes down. A full asphalt driveway lands at $3,500 – $9,000 in Bedford, and a rebuild at $5,000 – $14,000; sealing afterward adds $250 – $700. Call (855) 912-5373 for an exact quote – estimates are free and written line by line.
Every asphalt project we do is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right – one of the longest workmanship guarantees in residential construction. The estimate spells out what’s covered and for how long before you sign anything. Ask about it on the call, and we’ll put it in writing.
Get a free estimate for asphalt driveways & resurfacing in Bedford
Call (855) 912-5373 to schedule a free on-site estimate. A live person answers, day or night, and we’ll come out, probe the base, and put a line-item number in front of you – square footage, thickness, base depth, drainage, and a seal coat date if you want one. Estimates are free, pricing is upfront with no surprises, and every job carries the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.












