







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Keller, TX: What the Job Actually Involves
Door Installation in Keller, TX, usually runs $450 to $1,600 per door for an interior replacement and $1,200 to $3,800 per exterior unit depending on material and whether the rough opening needs rework. A standard swap takes one day; an exterior door with framing or threshold repairs takes two to three. Call (855) 912-5373 and we’ll walk your openings before anything gets ordered.
Why Keller’s 1990s Build-Out Shapes Every Door Installation We Do

Drive through Hidden Lakes or the streets off Bear Creek Parkway and you’re looking at the same wave of houses: brick-veneer traditional and Texas-style two-story plans built from the late 1980s into the 2000s, slab-on-grade, all of it now hitting the 25 to 30 year mark. That timing matters for doors. The builder-grade hollow-core interiors and original exterior slabs from that era are at the end of their service life at almost exactly the same moment. Keller’s construction market has pushed north and west, so what’s left in the district is second-generation work: replacing what the original build installed. We spend our days in these subdivisions pulling warped slabs, patching frames that swelled through fifteen North Texas summers, and matching new doors to trim profiles that haven’t been stocked since the Clinton administration.
The other half of the story is the HOA. Most of Keller’s master-planned subdivisions have an architectural review committee, and exterior door changes – especially front entry color and style – typically need approval before you buy the unit. We’ve learned to build that into the schedule from day one rather than discovering it after the door is sitting in the garage.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How Our Door Installation Process Runs, Stage by Stage
Here’s the real sequence, so you know what happens on day one versus day three and what we need from you at each step.
1. Walkthrough and measuring (day 0, about an hour)
We measure every opening, check plumb and square on the frame, and note whether the existing threshold is sitting on sound subfloor or rotted decking. You decide which doors are in scope and whether we’re matching existing trim or re-casing the opening. This is also when we flag HOA color and style rules for exterior doors so the application starts early.
2. Ordering and lead time (1 to 3 weeks, longer for custom)
Stock interior slabs come fast. Exterior fiberglass or steel entry units and any custom-sized door run longer. You approve the final spec sheet and we place the order. Nothing gets demoed until the new unit is on site.
3. Demo and prep (day 1, 2 to 4 hours per opening)
Old door and trim come out, the rough opening gets inspected for rot, and we address any soft framing or threshold damage before a new unit goes in. On exterior doors this is where we find the surprises – failed flashing, settled thresholds, water staining behind the brick mold.
4. Install, shim, and seal (day 1 to day 2)
New unit set plumb, shimmed, anchored, insulated, and sealed. Exterior doors get new flashing and a proper sill pan. Interior doors get hung, aligned, and checked for latch and swing.
5. Trim, hardware, and final walk (day 2 to day 3)
Casing goes back, hardware installs, and we walk every opening with you. Weatherstripping and sweep get checked for a clean seal. This is part of our Windows & Doors service, so the same crew that sets doors handles the trim and finish.
The Options You’ll Choose Between
Most of the decisions happen at the walkthrough, and here’s the honest trade-off on each.
- Interior: hollow-core vs. solid-core. Hollow-core runs $450 to $750 installed and suits closets and low-traffic rooms. Solid-core runs $700 to $1,100 and kills sound transfer between bedrooms – worth it on a two-story Keller plan where the upstairs hallway echoes.
- Exterior entry: steel vs. fiberglass vs. wood. Steel runs $1,200 to $2,200, holds paint well, and dents. Fiberglass runs $1,800 to $3,200 and handles the North Texas sun and hail far better. Wood runs $2,800 to $3,800 and needs refinishing every few years.
- Slab vs. prehung. Prehung units come with frame and hinges and install faster. Slabs are cheaper but require reusing the existing frame, which only works if that frame is still true.
- Hardware grade. Builder-grade knobs wear out in a few years. Upgraded levers and deadbolts add $80 to $250 per opening and last far longer.
- Patio door configuration. A standard single slider vs. French or multi-panel changes both the cost and the framing scope. We’ll flag this in passing if it comes up, but that project runs on its own track.
See the difference
Before
After
Before
After
Before
AfterWhat Door Installation Costs in Keller, TX
For most Keller homes, budget $450 to $1,600 per interior door and $1,200 to $3,800 per exterior door, installed. Whole-house interior packages run $3,500 to $9,000 for six to ten openings. Here’s what moves the number:
- Door material and grade. Hollow-core vs. solid-core, steel vs. fiberglass vs. wood – this is the single biggest swing, often a 2x difference.
- Condition of the existing opening. A true, plumb frame is a one-day job. Rotted subfloor, settled threshold, or a rough opening that’s out of square adds framing and prep time.
- Configuration. Standard single doors are straightforward. Double doors, French doors, and any sidelite configuration add material and install labor.
- Trim and finish. Reusing existing casing is cheapest. Matching new trim to a 1990s profile or re-casing the entire opening adds cost.
- Permit scope. Interior door swaps generally don’t require a permit. Exterior door replacements that alter the opening size or affect structural framing may – we pull what’s required and pass the inspection.
Every estimate is written line-item, so you see the unit, the labor, the trim, and the permit line before you sign. The number you see is the number you pay, and our 730-Day Done Right Promise covers the workmanship on all of it.
What Keller Homes Specifically Do to This Job
Two things make door work in Keller different from a generic install. First, the build era. Homes from the late 1980s through the 2000s were framed with trim profiles and door sizes that aren’t standard stocked items anymore, so matching existing casing on a partial replacement means sourcing or milling, not just picking up a stick at the box store. Second, the clay. The expansive black clay under Keller’s subdivisions swells and shrinks hard between drought and wet season, and slabs move with it. That movement shows up at exterior thresholds – doors that stick in August and drag in February are usually telling you the slab has shifted, not that the door is bad. We check that before we sell you a new unit. When a full envelope refresh is on the table, this work sits under the broader Windows & Doors in Keller scope, and homeowners often pair this with Cabinets & Countertops in Keller when a kitchen or bath is getting new doors at the same time. We cover Keller along with Watauga, North Richland Hills, Saginaw, and Hurst.
Serving Keller, TX – Our Local Coverage Area
We serve Keller and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked About Door Installation in Keller
A standard interior door swap is a one-day job. An exterior entry replacement runs two to three days once we’ve addressed prep, flashing, and trim. Whole-house interior packages of six to ten doors typically finish in three to four working days. Call (855) 912-5373 for a schedule window that fits your project.
Interior door replacements generally don’t require a permit. Exterior door replacements that change the opening size, affect structural framing, or alter the home’s envelope often do, and Keller’s inspection process is straightforward when the work is done right. We pull what’s required and pass the inspection as part of the job.
Usually, yes. Most of Keller’s master-planned subdivisions have an architectural review committee with an approved color and style list for front entry doors. We help you submit the application with the right product spec before the door is ordered, so the install doesn’t sit waiting on approval.
In nearly every case, yes. Doors swap within the existing opening. Relocating an opening or changing its size widens the scope; that’s a different conversation. If a rough opening needs framing repair from rot or settling, we handle that within the original install window.
Our 730-Day Done Right Promise backs the workmanship on every door we install – one of the longest workmanship guarantees in the residential construction space. Manufacturer warranties cover the door units themselves. If something isn’t right, we make it right. Call (855) 912-5373 to talk through warranty questions before you commit.
Get a Free Estimate on Door Installation in Keller

Call (855) 912-5373 to schedule a free on-site estimate for Door Installation in Keller. We’ll measure every opening, walk HOA requirements with you, and hand you a written line-item quote – no vague bids, no change orders. A live person answers the phone 24/7, so you’re not waiting until Monday. If you’re also considering a bigger footprint change, a Garage Conversion ADU in Keller often adds its own door scope and we can scope both in one visit.
Written by the team at Groundwork Construction Co.












