







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Fort Worth, TX: What It Takes and What It Costs
Most concrete driveway and flatwork jobs in Fort Worth run $4,500 – $12,000 for a full pour, and the work takes five to seven days of on-site labor with a cure window before you park on it. That range covers removal of the old slab, base prep, forms, steel, the pour, and finish. A replacement sits at $5,000 – $14,000 when the base needs deeper correction or the old slab comes out over tree roots. Call (855) 912-5373 for a free on-site estimate and a written, line-item quote.
How the work actually runs, from demolition to the first park

Concrete is a sequence business, not a one-day event. Here’s the order we hold to in Fort Worth so you know what to expect on each day and what you’ll be asked to decide.
Day 1: demo and haul-off
We break out the old slab, load it, and haul it to a recycler. A standard two-car driveway comes out in a day. If roots have lifted sections, we cut them back enough to clear the new base. You decide whether the new slab keeps the existing width and apron or gains a bay for a third vehicle.
Day 2: excavation, base, and grading
This is where a driveway is won or lost. We cut down four to six inches, set the subgrade, and bring in a compacted crushed-stone base in lifts. Fort Worth’s expansive black clay is the reason we don’t skip this. A shallow base over moving soil cracks a slab inside two summers. You approve the finished grade and the drainage slope before anything is formed.
Day 3: forms, rebar, and the inspection
We set forms to the city’s right-of-way line where the apron meets the street, tie rebar in a grid, and place the vapor barrier. If the job requires a permit for the approach, this is where it gets inspected. We handle the permit and meet the inspector. You sign off on the final layout before the pour.
Day 4: pour and finish
The pour happens in the cool of the morning. Finishing starts right behind the chute. This is where you pick the surface: broom finish for grip, a light salt finish for texture, or a control-joint layout that reads cleaner across the slab. Joints get cut the same day or the next, and that’s not cosmetic – it’s how the slab relieves stress.
Days 5 through 7: curing and joint seal
Fresh concrete needs moisture and time. We keep light traffic off for 24 to 48 hours, keep vehicles off for seven days, and seal the joints and surface in that window. Full cure runs longer, so plan on the street or a side spot for a week. This is also when the site gets cleaned and the finished edges are dressed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
A concrete driveway is not one product. These are the trade-offs worth knowing before you sign.
- Standard gray vs. integrally colored: Plain gray is the value pick and holds color with no maintenance. A through-mix color adds cost but won’t chip off, unlike a surface stain. It suits homeowners who want a warmer tone against red brick ranch houses.
- Broom finish vs. textured finishes: Broom is the safest underfoot and the cheapest. A salt or exposed-aggregate finish adds grip and visual depth, costs more, and is slower to finish.
- 4-inch vs. 5- to 6-inch slab: Four inches handles foot and car traffic. If you park a half-ton truck or a heavy SUV, go thicker. The upcharge is modest next to what a cracked slab costs to replace.
- Rebar vs. welded wire mesh: Mesh is common and cheaper. Rebar holds the slab together across the clay movement Fort Worth sees. We recommend rebar for anything with trees nearby or heavy vehicle load.
- Control joints and layout: Joints prevent random cracking, but where they land matters visually. We lay them out so the slab reads even from the street.
- Drainage and slope: A slab that sheds water away from the house and garage beats any finish upgrade. We set slope to move water off the door line and out to the street or a swale.
What Concrete Driveways & Concrete Work costs in Fort Worth, TX

Concrete driveway installation in Fort Worth runs $4,500 – $12,000 for a typical residential job. A full driveway replacement lands at $5,000 – $14,000 once you add demo, base correction, and haul-off. Smaller flatwork – an apron, a pad, a walk – sits inside those numbers depending on square footage.
Four things push a job toward the low or high end:
- Square footage and slab thickness: The single biggest lever. A widening or a thicker slab for trucks adds material and labor fast.
- Condition of the base and old slab: Deep clay correction, root removal, or failed subgrade raises the number. A flat, solid site keeps it low.
- Site access: A narrow side yard or a tight gate means a wheelbarrow instead of a chute. That’s labor.
- Permit scope and right-of-way work: If the apron ties into a city right-of-way, expect inspection time and a permit fee on top.
Your written estimate covers demo, haul-off, base prep, forms, rebar, the pour, finishing, and joint cutting. It does not include ornamental borders, expansion of the drainage system, or landscaping repair around the edges – we call those out as line items so nothing surprises you at the end. Our 730-Day Done Right Promise backs the workmanship in writing. Upfront pricing means the number in the quote is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fort Worth homes specifically do to this job
Fort Worth is a city that keeps building over its own history. Century-old Stockyards blocks and Near Southside brick warehouses sit a few miles from master-planned sprawl pushing past Loop 820 toward Alliance and Walsh Ranch. That two-speed reality shows up in concrete work. In Fairmount and Ryan Place, we’re pulling up cracked aprons on 1920s bungalow lots where the original concrete was poured over shallow footings and roots have done their work for decades. Out toward the northwest tract housing, we’re pouring fresh slabs on graded lots where the base engineering matters more than the demo.
North Texas heat and the region’s expansive black clay are the defining pair. Frost line is shallow here, so foundations and slabs are engineered for soil movement, not freeze depth. That clay swells in a wet spring and shrinks in a dry August, and a driveway without a proper base and rebar pays for it. The historic districts – Fairmount, Ryan Place, and the Stockyards area – carry design-review overlays, so even a straightforward apron replacement can slow down while the district review moves. What flies in a new subdivision won’t pass in a 1920s bungalow block, and crews learn that fast when they pull permits in Fort Worth. If the job is part of a full Driveway & Pavers in Fort Worth plan, we sequence the concrete first so the rest has a solid surface to build on.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Concrete Driveways & Concrete Work in Fort Worth

Plan on five to seven days of on-site work plus a week before you park on it. Demo, base, forms, and pour take four days; joint cutting and sealing follow; full cure runs longer. Call (855) 912-5373 for a schedule specific to your lot.
It depends on whether the work touches the city right-of-way. An apron or approach at the street usually needs a permit and an inspection; a slab fully on private property often doesn’t. We handle the permit and meet the inspector when one’s required. Call (855) 912-5373 and we’ll tell you before you commit.
Usually yes. A driveway sits at grade and rarely conflicts with buried plumbing, but we check the sewer and water line depth before we dig, because a shallow main or a cleanout in the path needs rerouting. When that happens, it’s a line item, not a surprise. Call (855) 912-5373 for an exact quote.
Replacement runs $5,000 – $14,000, depending on size, base condition, access, and permit scope. New installation starts at $4,500 and climbs to $12,000 for larger or thicker slabs. Call (855) 912-5373 for a free written estimate.
Every concrete driveway and flatwork project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it’s in writing. Call (855) 912-5373 to get your estimate scheduled.
Get a free concrete estimate in Fort Worth
If you’re planning Concrete Driveways & Concrete Work in Fort Worth, start with a free on-site estimate. Call (855) 912-5373 and a live person answers – any hour, any day. We’ll look at the site, check the base and drainage, and hand you a written, line-item quote with upfront pricing. From foundation to finish line, we cover Fort Worth and the surrounding neighborhoods, and homeowners often pair a new driveway with ADU Site Prep & Utilities in Fort Worth or Door Installation in Fort Worth while the crew is already on site. Prefer to see the wider scope first? Start with our Driveway & Pavers service.
Written by the team at Groundwork Construction Co.












