







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Forest Hill, TX: What It Takes and What It Costs
Concrete driveways and concrete work in Forest Hill, TX typically run $4,500 – $12,000 for a full driveway installation, with most single-car and small two-car pours landing between $6,000 and $9,000. A standard job takes 3 to 5 working days from demo to cure, though tight 1950s lots along the Mansfield Highway corridor can stretch that with haul-off and staging. Call (855) 912-5373 for a free on-site estimate and a written line-item quote.
How We Pour a Driveway in Forest Hill, Start to Finish

Concrete work rewards sequencing. Skip a step and you pay for it in cracks two summers later, especially on North Texas clay. Here’s how a driveway job actually runs.
Stage 1: Site walk and measure (day 1, about an hour)
We measure the existing drive, check slope away from the slab, and look at where water currently goes during a hard rain. On Forest Hill’s narrow residential streets, we also figure out where a dump trailer can sit without blocking a neighbor’s mailbox or the alley. You decide the width, the finish, and whether you want a widened apron for a second vehicle.
Stage 2: Demo and haul-off (days 1-2)
Old concrete comes out with a breaker and goes into a roll-off. On a 1950s plat, mature trees and overhead lines often mean hand work near the edges, which adds hours. We protect the yard and mark irrigation lines before anything swings. You don’t have to do anything here except keep vehicles off the street during the haul.
Stage 3: Subgrade prep and form (day 2-3)
This is the stage most concrete fails on. We excavate to depth, compact the subgrade, and bring in select fill where the existing soil is loose. Forms get set to a minimum 2% slope away from the house so water doesn’t pond against the slab or the garage threshold. You approve the layout before we pour.
Stage 4: Rebar, pour, and finish (day 3-4)
We set rebar on chairs, order the mix, and pour in one continuous run where access allows. Finish options – broom, exposed aggregate, or saw-cut control joints – get decided before the truck arrives because you can’t change your mind mid-pour. Expansion joints go against the slab and any fixed structure.
Stage 5: Cure and seal (days 4-5, plus 7 days of light traffic)
Concrete cures for 28 days to full strength but you can walk on it in 24 hours and drive on it in about 7 days. We come back to seal and clean up the site. Any touch-up on edges or joints happens here. You get the care instructions in writing so you don’t hose it or park on it too soon.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Actually Choosing Between on a Forest Hill Concrete Job
Concrete isn’t one product. The spec decisions below move both the price and how the driveway holds up through a decade of 100°F+ summers and clay movement.
- Standard 4-inch slab vs. 5-6 inch reinforced: A 4-inch broom-finished pour handles passenger cars fine and sits at the low end of our range. For anything that sees a heavy truck, an RV, or a work trailer, step up to 5-6 inches with #4 rebar and a thicker edge. The upcharge is real but cheaper than a rebuild.
- Broom finish vs. exposed aggregate vs. stamped: Broom is the budget workhorse and the most slip-safe. Exposed aggregate adds grip and hides tire marks; it costs more and takes longer to wash. Stamped concrete – decorative patterns – is a separate specialty and has its own page; mention it here only as an option.
- Control joints: Saw-cut joints every 8-10 feet relieve stress so cracks land where you want them. Skip them and you get random cracks, usually within two years on expansive clay.
- Base thickness and fill: Forest Hill’s clay soil means a proper compacted base matters more than the rebar gauge. Bring in good fill if the existing subgrade is soft; don’t pour over loose dirt to save a day.
- Drainage and swale: A small swale or a channel drain at the garage apron keeps water out of the slab and off the foundation. Worth adding if your current drive ponds.
Brands matter less on concrete than on some trades, but mix suppliers and finish products do vary. We spec aggregate from regional suppliers and use Tamko for any adjacent flashing or trim, plus Boral for masonry accents when a homeowner wants a brick border.
What Concrete Driveways & Concrete Work Costs in Forest Hill, TX

Concrete driveway installation in Forest Hill runs $4,500 – $12,000. Driveway replacement – tear out and re-pour – sits at $5,000 – $14,000 once demo and haul-off are included. Sealing alone is a separate, smaller job and has its own page.
Here’s what pushes a job toward the low or high end:
- Size and layout: A single-car drive with a straight run sits near $4,500. A wide two-car with a turnaround or a long run from the street pushes toward $12,000.
- Existing condition: Overlaying or replacing a cracked drive means demo, haul-off, and possibly subgrade repair. Full removal adds $1,200-$2,500 depending on thickness and access.
- Access and staging: Narrow Forest Hill streets, mature trees, and overhead lines mean hand work and smaller equipment in some yards – a real line item.
- Reinforcement and thickness: Rebar, a thicker slab, or a heavy-duty spec for trailers adds $600-$2,000.
- Drainage work: Swales, channel drains, or regrading the apron adds $400-$1,500.
A written estimate from us includes the demo, base prep, rebar, pour, finish, control joints, haul-off, and cleanup. It typically does not include utility relocation, tree removal, or a retaining wall if the grades need one – those get itemized separately and approved before we start. No change orders once the pour is scheduled. Our 730-Day Done Right Promise covers the workmanship, and we can pair the financing: 0% for 18 months, plus $1,000 off projects over $10,000.
See the difference
Before
After
Before
After
Before
AfterWhat Forest Hill Homes Specifically Do to This Job
Forest Hill is a small, fully built-out inner-ring suburb of Fort Worth, and almost no new construction happens here. Nearly all the concrete we pour is renovation, replacement, or a rebuild tied to a second-generation remodel of a 900-1,200 sq ft ranch house. That fact changes the job in ways that don’t show up on a suburban new-build pour.
Most Forest Hill drives were laid in the 1950s-60s, often at the same time as the original pier-and-beam or early slab foundation. Decades of North Texas heat and the expansive clay underneath have left many of them cracked, tipped, or ponding water toward the garage threshold. When we tear out a drive along Mansfield Highway or off a side street in the 76119 corridor, we’re usually fixing drainage as much as surface. The 1950s plat also means tight setbacks and narrow residential streets – equipment has to be small, and the survey check happens before the first form goes down. Add the long 100°F+ summers and the drought-to-flood swings, and slab work and drainage correction are a year-round reality, not a seasonal one. If the concrete job is part of a larger project, it’s often booked alongside our Driveway & Pavers in Forest Hill, and plenty of homeowners pair this with ADU Site Prep & Utilities in Forest Hill when they’re building out back.
If you’re widening the approach or adding a garage, we often handle Door Installation in Forest Hill on the same job – no coordinating two contractors. See the wider scope on our Driveway & Pavers page, and check what we cover across Forest Hill.
Serving Forest Hill, TX – Our Local Coverage Area
We serve Forest Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Forest Hill

Most jobs take 3 to 5 working days from demo to cleanup, plus about 7 days before you should drive on it. Tight lots with heavy tree cover or narrow access can add a day to demo and haul-off. We schedule around your timeline and tell you upfront when the pour will happen.
Replacing a driveway in its existing footprint usually doesn’t require a building permit, but a new driveway, a widened approach, or any work that touches the right-of-way does – and Forest Hill’s older plats sometimes have restrictions a newer suburb wouldn’t. We check before the first form goes down and pull permits where required. Call (855) 912-5373 and we’ll confirm what your address needs.
Sometimes, yes – a concrete overlay can work if the existing slab is structurally sound, hasn’t settled badly, and has room for the added thickness at the garage and gutter. If it’s cracked through, tipped, or ponding, replacement is the honest answer. We’ll show you which side of that line your drive is on during the free estimate.
Driveway replacement in Forest Hill typically runs $5,000 – $14,000 depending on size, demo and haul-off, and drainage or subgrade work. New installation without tear-out sits at $4,500 – $12,000. Call (855) 912-5373 for an exact quote – estimates are free and come written line by line.
Our work is covered by the 730-Day Done Right Promise – two full years on workmanship, and if something isn’t right, we make it right. Concrete itself cracks; joints and reinforcement manage where it cracks, not whether. If your drive cracks outside the control joints within the promise window, that’s a warranty call, not a sales pitch.
Get Your Free Concrete Driveway Estimate in Forest Hill
If your drive is cracked, ponding, or you’re planning a replacement pour, call (855) 912-5373 to schedule a free on-site estimate. We’ll measure, check slope and drainage, talk through finish and spec options, and hand you a written line-item quote – upfront pricing, no surprises. Calls are answered by a live person, day or night, and every technician on site is background-checked and arrives in uniform.
Written by the team at Groundwork Construction Co.












