







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Keller, TX: What It Costs and How Long It Takes
A chain link fence in Keller, TX typically runs $3,500 to $9,000 for a standard residential lot, installed in one to three days once materials land on site. Most of that lead time is the permit and the locating phase, not the build itself. Call (855) 912-5373 and we’ll walk your property line with you, price it in writing, and tell you straight whether your fence is a repair or a full replacement.
How We Build a Chain Link Fence, Stage by Stage

Chain link moves fast compared to most construction, but the sequence matters. Here’s the real order of operations, including the parts that depend on you.
Stage 1: Site walk and line layout (day 1, about an hour)
We meet you at the property, mark the fence line with you, and identify where it runs relative to your survey. You decide the gate locations and swing direction at this visit, because gates set the rhythm for every post after them.
Stage 2: Utility locating and permit (one to five business days, weather dependent)
North Texas requires a call to 811 before any digging, and Keller’s permitting office handles residential fence permits with a turnaround that varies by season. You decide whether to authorize the permit filing here. We pull it and handle the inspection scheduling.
Stage 3: Demo and post setting (day 1 on site, roughly four to six hours)
Old fencing comes out first, then we dig post holes, set terminals and line posts in concrete, and check every line for pull strength and height. You’ll see the posts set before anything gets hung, so there’s no surprises later.
Stage 4: Framing, tension, and fabric (day 2, three to five hours)
Top rail, tension bands, and the chain link fabric go up with a stretcher and come out tight enough that it doesn’t sag or oilcan. Gates get hung and adjusted here. You pick gate hardware at this stage if you haven’t already.
Stage 5: Final walk and inspection (day 2 or 3, thirty to sixty minutes)
We walk the full line with you, check gate swing, tension, and post alignment, and make any small adjustments on the spot. Then you sign off, and the inspection follows within Keller’s review window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Options You’ll Actually Choose Between
Chain link has more variation than people expect, and the choices below are the ones that move both the look and the number.
- Gauge (wire thickness): 11.5-gauge is the budget line and can’t take a hit; 9-gauge is the standard for residential use and lasts far longer in North Texas hail; 6-gauge is commercial-grade and rarely needed on a house lot. The jump from 11.5 to 9 adds real cost but is the single best durability upgrade.
- Coating: galvanized steel is the cheapest and holds up in dry conditions; vinyl-coated (often sold in black or green) resists rust, looks better against landscaping, and costs more per foot, but it’s the more common choice on homes that need to read clean from the street.
- Height: 4-foot is standard for property lines; 5- and 6-foot are common on backyards with pets or pools. Taller means more fabric and heavier posts, so cost climbs.
- Top rail and terminals: 1-5/8″ top rail is standard; heavier wall thickness and brace bands at every corner are worth asking for on a long run.
- Gates: a walk gate is small money; a drive gate is the largest single line item, and gate hardware (self-closing hinges, latches) is worth thinking about now rather than retrofitting later.
- Tension wire: a bottom tension wire keeps the fabric from curling up where a dog has been digging under, and it’s a cheap add.
What a Chain Link Fence Costs in Keller, TX

Most residential chain link in Keller lands in the $3,500 to $9,000 range. Smaller, shorter runs at 4-foot with standard gauge come in closer to the bottom. Long property lines, drive gates, heavier gauge, and vinyl coating push toward the top and can go past it on larger lots.
The variables that move the number:
- Linear footage and layout. A long single run is cheaper per foot than a chopped-up line with many corners and terminals.
- Gauge and coating. 9-gauge over 11.5-gauge, and vinyl over galvanized, are the two biggest mateterial jumps.
- Gates. A drive gate or multiple walk gates add hardware, heavier posts, and concrete.
- Terrain and obstacles. A level line is fast. Slopes, tree roots, buried irrigation lines, or existing concrete in the trench slow things down and require more labor and concrete per post.
- Permit scope. A permit and inspection adds a line item but it’s unavoidable on permanent fencing in Keller, and it’s priced into the estimate up front rather than tacked on later.
What’s included in our written estimate: materials, labor, post concrete, permit fees we know at signing, tension wire, and haul-away of the old fence if there is one. What typically isn’t: unexpected utility relocation, engineer letters if the fence crosses an easement with special requirements, or fence relocation after the permit is approved. Your estimate shows each of these separately so there are no change orders once work starts.
See the difference
Before
After
Before
After
Before
AfterWhat Keller Homes Do to Chain Link Fence Work
Keller’s housing stock is dominated by late-1980s through 2000s brick-veneer traditional homes, most of them in master-planned HOA subdivisions running through ZIP codes 76248 and 76244. That build era matters for fencing: many of these neighborhoods are now on their second fence, and the original galvanized chain link is at the age where the wire has rusted at the ground line while the posts are still fine. The other local factor is the black clay soil under these subdivisions, which swells and shrinks between wet and dry seasons and can shift a post over time. We set posts deeper in clay than in sandier soil, and we check for existing irrigation lines buried along the fence line that a prior owner ran. Homes in the Keller Town Center area often have HOA rules on fence height and finish, so check your deed restrictions before we stake the line. Chain link often comes up as part of a full Fence Installation in Keller project when a homeowner is replacing multiple fence types at once, or alongside Door Installation in Keller work on a home that’s going through an exterior refresh.
Serving Keller, TX – Our Local Coverage Area
We serve Keller and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Keller

Most residential chain link fences in Keller are installed in one to three days on site, with the total timeline usually one to two weeks from signing once you count the permit and 811 locating window. Larger lots with multiple gates can run longer. Call (855) 912-5373 and we’ll give you a realistic window for your property.
Yes, permanent residential fencing in Keller generally requires a permit before installation, and an inspection follows once the work is done. We pull the permit, schedule the inspection, and handle the submission. Call (855) 912-5373 for a free estimate and we’ll walk you through what your specific property requires.
Many Keller HOA subdivisions restrict chain link on side and front yards, or require a specific coating color, so check your deed restrictions and architectural committee rules before we order materials. We can help you choose a vinyl coating and gate style that reads cleaner against the house and is easier to get approved. Call (855) 912-5373 and we’ll price both standard and vinyl-coated options so you can make an informed choice.
Most chain link fence projects in Keller run between $3,500 and $9,000, depending on linear footage, gauge, coating, and gate count. Heavier gauge and vinyl coating sit at the upper end; short standard runs sit at the lower. Call (855) 912-5373 for a free written estimate with every line itemized.
Every chain link fence we install is backed by our 730-Day Done Right Promise: if something isn’t right, we come back and make it right. That covers workmanship and installation, and it’s one of the longest workmanship guarantees in the residential construction space. Call (855) 912-5373 to schedule your free on-site estimate.
Schedule Your Free Chain Link Fence Estimate in Keller
We’ll walk the property line with you, check your survey and HOA rules, measure the run, and hand you a written, line-item estimate with permits and haul-away already accounted for. No pressure, no surprises. If your project includes interior work, homeowners often pair this with ADU Site Prep & Utilities in Keller or a wider scope through our Fence Installation service. Call (855) 912-5373 to book your free estimate in Keller.
Written by the team at Groundwork Construction Co.












