







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWrought Iron Fence Cost in Fort Worth, TX: What You’ll Actually Pay Per Linear Foot
Wrought iron fencing in Fort Worth typically runs $3,500 to $9,000 installed for a standard residential run, or roughly $35 to $75 per linear foot depending on height, picket spacing, and whether you’re getting true forged iron or prefabricated ornamental steel panels. Call (855) 912-5373 for an upfront, no-hassle quote. A wrought iron fence in Fairmount has to satisfy the historic design-review board and survive a Fort Worth summer, and the fences that fail either test were priced by crews who quoted the metal but not the surface prep.


Why Fort Worth Iron Fences Fail Early (And What It Adds to the Cost)
Most wrought iron cost guides treat primer and coating as an optional line item. In Fort Worth, it isn’t optional. Here’s the mechanism we see repeatedly: North Texas heat drives thermal expansion through the summer, and every weld seam in the fence opens a fraction as the metal cycles. Then spring humidity rolls in and moisture finds those open seams. An improperly primed iron fence starts rusting at the welds within two seasons.
A proper two-coat epoxy primer system applied at installation costs more upfront. It prevents a full-replacement scenario five years down the road, which is the scenario we get called about most often on the Near Southside. The iron fence cost difference between a coated system and a bare-metal install is usually a few hundred dollars on a standard run. A full replacement is thousands.
Groundwork Construction Co. of Fort Worth backs weld integrity and coating adhesion under the 730-Day Done Right Promise. Those are the two most common iron fence failure points, and both are covered under our guarantee, not passed off to the fabricator.
Fort Worth Historic District Design Review: What Fairmount and Ryan Place Require
A wrought iron fence in Fairmount, Ryan Place, or the Stockyards overlay has to clear design review before fabrication starts. Each district has its own preferences for pattern, height, finial style, and picket spacing, and what passes in a new subdivision west of Loop 820 won’t pass in a 1920s bungalow block. We handle the permit and design-review submission, not the homeowner. That matters because fabricating before approval is an expensive mistake to unwind.
The construction landscape here runs at two speeds. One permit covers a historic-district restoration; the next covers greenfield framing. Crews pulling iron fence permits in Fort Worth learn quickly that the district review adds a week or two to the front end of a project. We build that step into the schedule so nobody is surprised by a delay after the panels are already cut.

Wrought Iron vs. Ornamental Steel: Two Different Prices, Two Different Products
Most cost guides conflate true wrought iron with prefabricated ornamental steel panels. They’re not the same product, and the price gap is real. True forged wrought iron is custom-fabricated, welded to spec, and priced higher. Prefabricated ornamental steel panels are mass-produced and install faster, but the welds and coating are only as good as the factory. We’ll tell you which one makes sense for your property and your budget, and we won’t up-sell you into forged iron on a fence that doesn’t need it.
Wrought Iron Fence Cost Breakdown for Fort Worth
| Line Item | Typical Installed Cost |
|---|---|
| Standard ornamental steel fence (4 ft, 6 ft spacing) | $3,500-$5,500 |
| Ornamental steel fence (5-6 ft, tighter spacing) | $5,000-$7,500 |
| Custom forged wrought iron (per run) | $7,000-$9,000 |
| Two-coat epoxy primer + finish system | Included in quote above; add $8-$12 per linear foot if sold separately |
| Driveway or walk gate (standard hardware) | $400-$1,200 |
| Custom finials (per picket) | $4-$12 |
| Historic district design-review submission | Handled by Groundwork; permit fees vary by district |
Why Quotes Vary by $15-$25 Per Foot
When you collect bids on wrought iron fence cost in Fort Worth, the spread between the low quote and the high quote is usually about $15 to $25 per linear foot. That gap comes from four places:
- Panel height: a 4-foot run costs less per foot than a 6-foot run, both in material and in post anchoring.
- Picket spacing: tighter spacing means more steel and more welds. It’s the biggest single driver of variance.
- Gate hardware: a self-closing latch, keyed entry, or welded hinge upgrade adds real cost.
- Custom finials vs. standard caps: decorative finials are labor, not just material.
Our Fence Installation process spells out exactly what’s in the number so you can compare quotes line for line. No-hassle upfront pricing means the number you see is the number you pay. Our technicians have up to 12 years of experience on iron and steel work, and every job is background-checked and uniformed. We answer the phone with a live person 24/7, so if a fence panel is damaged in a spring storm, you’re not leaving a voicemail.
Common Local Scenarios We See in Fort Worth
In Fairmount, we regularly see 1920s bungalow blocks where a homeowner wants a decorative iron front fence that satisfies the design-review overlay and matches the period. Those jobs need a pattern submission before fabrication.
In Ryan Place, the scenario is usually a rear property-line fence where the homeowner was quoted by a crew that skipped the primer coat. Those calls come in about three years after install, once the rust at the welds has already started.

Out toward Alliance and Walsh Ranch, we install ornamental steel for new construction. The homes are slab-on-grade and the lots are new, so there’s no historic review, but the summer heat cycles mean the coating spec still matters. We spec the same two-coat system on those jobs.
On the east side, where the stock runs to mid-century ranch brick, iron fence work is often paired with driveway and gate repair. If you’re also planning hardscape, our Driveway & Pavers team can coordinate the gate posts with the driveway pour so the anchor points line up.
Pairing Iron Fencing With the Rest of the Project
Groundwork runs seven service lines, which means a fence project rarely has to wait on a separate trade. If the iron fence is part of a larger exterior refresh, we can handle the Roofing and Windows & Doors scope on the same schedule. Standalone fence work runs through Fence Installation in Fort Worth.
Brand partners across our fence and exterior categories include PGT for high-impact window and door systems and CGI for impact-rated products, so when the fence and the front window work are in the same scope, you’re choosing from a curated list rather than whatever the supplier had in stock. Every project carries the 730-Day Done Right Promise, and if it’s not done right, we make it right.
If you’re also finishing the interior while the fence goes in, our Kitchen Remodeling and Bathroom Remodeling teams work off the same project calendar. We also build Home Additions & ADU structures that sometimes need a perimeter iron fence to match a Historic District overlay, and we coordinate the design-review submission across both scopes.
Homeowners outside Fort Worth sometimes ask about coverage. We install iron and ornamental steel fencing in Arlington, Denton, Plano, and McKinney with the same coating spec and the same guarantee.
FAQs
A wrought iron fence in Fort Worth typically costs $3,500 to $9,000 installed, or $35 to $75 per linear foot. Prefabricated ornamental steel runs at the lower end; custom forged iron with tighter picket spacing and finials runs higher. Call (855) 912-5373 for an exact quote. Estimates are free.
Yes. Groundwork handles the permit and design-review submission for fences in Fort Worth’s historic overlays, including Fairmount, Ryan Place, and the Stockyards area. Each district has its own pattern, height, and finial preferences, and we submit the design before any metal is cut. That step usually adds a week or two to the front end. Call (855) 912-5373 and we’ll walk you through the review timeline for your block.
A properly primed and coated wrought iron or ornamental steel fence should last 20 years or more in Fort Worth’s climate. The failure we see most often is a fence installed with bare metal or a single thin coat. Summer heat cycles open the weld seams and spring humidity drives rust into those openings within about two seasons. The two-coat epoxy primer system we apply at installation is what prevents that early failure. Call us to talk through the coating spec for your property.
It depends on how far the rust has spread. If the corrosion is caught at the welds early, a spot repair and recoat usually costs a fraction of replacement. Once rust works through the picket cross-section, replacement is the better call. We’ll tell you honestly which scenario you’re in. Call (855) 912-5373 for a free estimate and we’ll assess the fence in person.
Get an Exact Wrought Iron Fence Quote for Your Fort Worth Property
If you’re ready for real numbers instead of ballpark guesses, call (855) 912-5373. Our team will walk your property, measure the run, and quote the install with the coating spec included. Upfront pricing, no surprises. The free estimate and design consult are yours, and projects over $10,000 qualify for $1,000 off with 0% financing for 18 months.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












