







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Fort Worth Homeowners
A failing fence shows up fast in Fort Worth: boards warp and pull loose after a summer of 100-degree afternoons, wood posts rot at the soil line once the fall rains hit, and a windstorm rolling off the prairie can lay a tired panel flat overnight. We install wood, chain link, vinyl, aluminum, and iron fencing built for North Texas weather, and our technicians bring up to 12 years of experience to every job. Pricing is upfront and quoted in writing, all work is covered by our 730-Day Done Right Promise, and a live person answers the phone 24/7. Call (855) 912-5373 to schedule your free estimate.
What Our Fence Installation Service Includes
Every fence is different, so we scope each one on site before quoting. Here’s what the main options look like in Fort Worth.
Wood Fence
Cedar and treated pine privacy fencing is the most common fence in Fort Worth, and for good reason: it’s affordable, it blocks sightlines, and it suits the look of most neighborhoods. You need a new wood fence when posts start leaning, boards splinter, or a storm knocks out a run. We set posts in concrete below the frost line, use galvanized fasteners so they don’t rust in our humidity, and brace gates so they don’t sag within a year. Our technicians build to HOA and city setback rules, which vary block to block around here.

Chain Link Fence
Chain link is the workhorse fence for side yards, pet runs, and commercial lots, and it’s often the cheapest way to secure a perimeter. It’s the right call when you need visibility and durability more than privacy. We install galvanized and vinyl-coated chain link with tensioned top rails and proper terminal posts at every corner, because a slack chain link fence is the first thing to fail in wind. We also handle the gate hardware, so it latches clean and stays that way.

Vinyl Fence
Vinyl fencing holds its color without painting and shrugs off the UV that bleaches cheaper materials. Homeowners choose it when they want privacy without annual maintenance. We install vinyl panels rated for our heat, anchor posts deep enough to resist soil movement, and confirm post spacing against manufacturer specs so panels don’t bow. A typical vinyl fence run in Fort Worth falls in the $3,500 – $9,000 range depending on length and style.

Aluminum Fence
Aluminum fencing gives you a clean, open look for front yards, pool enclosures, and property lines where you don’t want to wall yourself in. It resists rust, which matters in a region with clay soils that hold moisture. We install aluminum with powder-coated finishes and racked panels that follow grade changes instead of leaving gaps at the bottom. If your lot slopes, aluminum is often the better fit than a rigid panel system.
Iron Fence
Wrought and ornamental iron fencing delivers security and curb presence, and it’s the standard choice for gated entries and historic properties near the older parts of Fort Worth. It’s heavier and more labor-intensive than aluminum, so the quote reflects that. We weld and set iron posts with proper footings, apply a protective finish, and hang gates on hinges that can carry the weight without dragging over time.
Fence Repair
Not every fence needs replacing. Sometimes it’s two broken pickets after a hailstorm, sometimes it’s a leaning post that just needs resetting. We assess whether repair makes sense versus replacement, and we tell you honestly when patching a rotten run will cost more than it saves. Repairs are quoted with the same upfront pricing as full installs, and we carry the right fasteners and materials to match your existing fence.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Fence Installation
Homeowners ask what materials we work with, and the honest answer is that we spec fencing from trusted brands alongside the structural products that go around it. When a fence ties into a hardscape project, we coordinate with the same material partners we use across our other trades, including James Hardie siding where a fence meets the house and Belgard pavers where a gate opens onto a new driveway or patio.
We also work with the interior brands our customers trust, like KraftMaid and Cambria, because a fence job is often part of a bigger property plan. Whether your project involves James Hardie, KraftMaid, or any other make, we can help you plan the materials that fit the job and the budget. We don’t sell you a brand name you didn’t ask for.
Signs You Need Fence Installation Right Now
- Leaning or loose posts. Wood posts rot at the soil line, and once a post gives, the whole run sags. A few leaning posts usually means the footing failed, not just the board, and patching it won’t hold through the next windstorm.
- Boards that warp, split, or pull free. Fort Worth summers dry wood out fast, and boards cup and pull from the rails. Gaps widen, privacy drops, and small repairs start outnumbering the fence itself.
- Rust and corrosion on metal fencing. Chain link and iron that develops rust at the welds or ground contact loses strength where it matters most. Left alone, a rusted post is the first to fail in a storm.
- A gate that drags or won’t latch. A sagging gate is a sign the posts or hinges have shifted. It’s an inconvenience on a good day and a security gap on a bad one.
- Storm or hail damage. North Texas hail and straight-line winds can flatten sections in minutes. If panels are down or the fence line is compromised, replacement is often faster and safer than piecemeal repairs.
Our Fence Installation Process – Step by Step
- 1
On-site estimate and design consult. We walk the property line with you, check setbacks against city and HOA rules, and talk through materials, height, and gate placement. You get a written, line-item quote with the number you’ll pay, no change orders hiding in the fine print.
- 2
Property line and utility check. Before we dig, we confirm boundary lines and have underground utilities marked. Post holes are where fences get expensive mistakes, so we don’t guess.
- 3
Layout and post setting. We set posts in concrete at the correct depth and spacing for your material, brace corners and terminal posts, and square every gate opening. Clay soil around Fort Worth moves with the seasons, so footing depth matters more than most people realize.
- 4
Panel installation and leveling. We hang panels or rails to follow your grade, fasten with galvanized hardware, and check the whole run for plumb. Gates get hung last, with hardware torqued and tested so they swing clean.
- 5
Final walkthrough and cleanup. We walk the finished fence with you, confirm gates, latches, and sightlines, and haul off leftover material and debris. Then it’s covered by the 730-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Fort Worth?

Fence installation in Fort Worth typically runs $3,500 – $9,000 for a standard residential job, and most homeowners land somewhere in that range once length, material, and gates are factored in. Here’s how the line items stack up:
| Project | Typical Fort Worth Range |
|---|---|
| Vinyl fence installation | $3,500 – $9,000 |
| Aluminum fence installation | $4,000 – $10,000 |
| Wood privacy fence (per linear foot, installed) | Quoted on site based on run length and gate count |
| Chain link (perimeter or pet run) | Quoted on site based on run length |
| Fence repair (pickets, posts, gates) | Quoted line by line |
What moves the number: linear feet, material (wood is usually the least expensive, iron the most), number of gates and whether they’re single or double, terrain and slope, and how much old fence has to come out. A flat lot with easy access costs less than a wooded lot with a slope and a corner that needs a custom brace.
How to avoid overpaying: get a written, line-item quote that spells out materials, gate hardware, old fence removal, and cleanup. A single lump-sum number is where surprise charges hide. Our free estimate includes all of that in writing, plus financing options: 0% for 18 months and $1,000 off projects over $10,000. Call (855) 912-5373 and we’ll put an exact number together – the estimate is free.
Fence Installation Near Fort Worth – Our Service Area
We install fences throughout Fort Worth and the surrounding communities, including Saginaw, White Settlement, Benbrook, Azle, Crowley, Haltom City, Richland Hills, Watauga, North Richland Hills, Forest Hill, and Hurst. If you’re just outside Fort Worth, our Fence Installation in Saginaw page covers the specifics for that side of town, and Fence Installation in White Settlement has what you need if you’re west of the city. Wherever you are in the metro, a live person answers the phone 24/7 and can schedule a free estimate around your week.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Fort Worth

Fence installation is the process of setting posts, hanging panels or rails, and mounting gates to create a boundary, privacy screen, or enclosure on your property. In Fort Worth, that usually means wood privacy fencing, chain link, vinyl, aluminum, or iron. The work includes layout, footings, material selection, and gate hardware. Our technicians bring up to 12 years of experience to every install, and all work is covered by the 730-Day Done Right Promise.
Most residential fence installs take one to three days depending on length and material. A short chain link run or a simple repair is often done in a single visit. A longer privacy fence with multiple gates, slope, and old fence removal stretches to two or three days. We give you a realistic timeline in the written quote so you can plan around it.
Fence installation in Fort Worth typically runs $3,500 – $9,000 for most residential projects. Vinyl fence installation lands in that same $3,500 – $9,000 range, and aluminum runs $4,000 – $10,000. Factors that move the price include linear feet, gate count, terrain, and old fence removal. Call (855) 912-5373 for an exact quote – estimates are free.
Yes. We work with James Hardie and other trusted brands where a fence meets siding or a hardscape project, and we can coordinate materials so the finished property looks cohesive. We’ll tell you which materials make sense for your fence and budget rather than upselling a name brand you don’t need. Ask about material options during your free estimate.
Yes. Storm damage, a fallen section, or a gate that won’t secure can leave your property exposed, and we take those calls seriously. A live person answers the phone 24/7, so you’re never stuck in a voicemail loop waiting until Monday. For non-urgent repairs and planned installs, we schedule around your week.
Every fence install and repair is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space. Combined with upfront pricing, the number you see is the number you pay. We’ll walk you through what the warranty covers during your free estimate.
Clear the fence line of vehicles, patio furniture, and anything blocking access to the posts, and mark any sprinkler heads or buried lines you know about. If your HOA or the city needs a survey or fence permit, have those documents ready before we start. The rest is on us: we confirm utility markings, handle the install, and clean up afterward. Call (855) 912-5373 with any questions before the crew arrives.
Schedule Your Fence Installation Service in Fort Worth Today
Ready for a fence that’s built to last, backed in writing? Groundwork Construction Co. of Fort Worth installs wood, chain link, vinyl, aluminum, and iron fencing with upfront pricing and a live person answering the phone 24/7. Call (855) 912-5373 for your free estimate and design consult, and we’ll put a real number on the job. No-obligation, no change-order surprises.
Written by the team at Groundwork Construction Co.












