Last updated November 18, 2026








Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
How Long Does Windows & Doors Take? Timelines and What to Expect
Custom window orders in the current market are running 6 to 14 weeks from some manufacturers. That single fact rearranges entire renovation schedules. Homeowners who don’t know it start a kitchen remodel or an addition expecting windows in two weeks, then spend a month staring at openings covered in plastic sheeting while the rest of the job sits half-finished. We’ve watched this play out plenty of times around Fort Worth, and it almost never comes from bad luck. It comes from a plan that never accounted for lead times, permit scheduling, or the weather window an installer needs to seal a home correctly. This guide walks through what actually drives the schedule on a window and door project, phase by phase, so you can ask the right questions before you sign anything.
Quick Answer
A typical window and door replacement takes 1 to 3 days of actual installation work, but the full project from signed contract to final inspection usually runs 3 to 16 weeks. The wide range comes down to three things: whether your units are stock or custom-ordered, whether your project needs a permit, and when the factory can deliver. In Fort Worth, most whole-home replacements land somewhere in the 6 to 10 week range once you factor ordering and scheduling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Table of Contents
- The Real Phase-by-Phase Timeline
- Stock vs. Custom Windows: Which Timeline Are You On?
- How Many Windows Get Installed in a Day?
- Why Fort Worth Weather Controls the Install Schedule
- Permits and Inspections: The Step Homeowners Forget
- Red Flags in Contractor Scheduling
- Doors Take Longer Than Windows (Here’s Why)
- How to Plan Your Project Around the Timeline
The Real Phase-by-Phase Timeline
Window and door projects don’t move in a straight line. They move in phases, and each phase has its own clock. Here’s how the schedule actually breaks down on a Fort Worth job, using honest numbers we see in the current market.
- Measure and order (1 to 2 weeks before the order goes in, then the lead time begins). A technician measures every opening, confirms the type (insert vs. full-frame), and builds the order. Measuring is quick. Confirming details with the homeowner and the manufacturer is where the week or two goes.
- Manufacturer lead time (2 to 14 weeks). Stock or quick-ship units can arrive in 2 to 4 weeks. Custom-sized, wood-clad, or specialty units from brands like Andersen or Marvin commonly run 6 to 14 weeks, occasionally longer for unusual sizes or finishes.
- Permit application and review (1 to 3 weeks, if required). Fort Worth reviews residential permit applications on a rolling basis. Simple replacements sometimes skip the permit; structural changes to openings do not.
- Delivery and staging (1 to 3 days). Units arrive, get inspected for damage, and get staged so the crew isn’t tripping over boxes on install day.
- Installation (1 to 5 days, depending on scope). Most whole-home jobs run 2 to 3 days. A single window or door is often a half-day.
- Final inspection (3 to 10 business days after you request it). If a permit was pulled, the city inspects. Plan for the buffer.
Stack those phases and you get the honest range: 3 to 16 weeks. A stock-window job with no permit can finish in three weeks. A custom whole-home order with a structural change can run four months. Neither number is unusual in Fort Worth.
Stock vs. Custom Windows: Which Timeline Are You On?
This is the single biggest fork in the road, and most homeowners don’t know which side they’re on until they’ve already signed. Knowing it up front changes the whole conversation.
Stock (Off-the-Shelf) Windows
Stock units come in standard sizes, usually ¼-inch increments, and are sitting in a distributor’s warehouse or on a quick-ship program. Brands like Sterling and certain Andersen series fall into this category for common sizes. Lead time is typically 2 to 4 weeks. If your existing openings match standard dimensions and you’re doing a like-for-like insert replacement, you’re on the fast track.
Custom and Specialty Windows
Custom units are made to your exact opening. That includes any window that’s an odd size, any wood-clad or true-divided-light unit, and frankly anything from the higher-end Andersen or Marvin lines. Lead time is 6 to 14 weeks, sometimes longer. Specialty shapes (arches, transoms, sliders with unusual dimensions) can push past the 14-week mark when a factory is backed up.
How to Know Which You Are
- Your existing windows are standard sizes and the openings are square: likely stock.
- The house is older and the openings are irregular, or the windows are full-frame replacements: likely custom.
- You want a specific finish, divided lites, or a matching style across the whole home: likely custom.
- You’re doing an addition or new construction: custom every time.
Ask your contractor point-blank, in writing, which category your order falls into and what the manufacturer’s current quoted lead time is. A crew that can’t answer that question precisely hasn’t placed the order yet.
How Many Windows Get Installed in a Day?
A two-person crew can typically install 8 to 12 windows in a single day for insert replacements. Full-frame replacements run slower, usually 4 to 6 windows per day, because the crew is removing the existing frame and rebuilding the rough opening. A whole-home job of 20 to 30 windows is realistically a 2 to 3 day project, not a one-day job.
Here’s why that matters: you don’t want your home left with open, unsealed openings overnight. A credible crew works in a sequence that keeps rooms weather-tight by end of day. That usually means they don’t tear out every window before installing one. They work section by section, room by room, or wall by wall, sealing as they go.
What a Credible Crew Size Looks Like
- 1 to 4 windows: one or two technicians, half a day to one day.
- 5 to 12 windows: a two- to three-person crew, one full day.
- 13 to 25 windows: a three- to four-person crew, two to three days.
- 25+ windows or full-frame work: a four-person crew over multiple days, sometimes with a dedicated trim carpenter.
Our technicians have up to 12 years of experience on jobs exactly like these, so the sequence and pacing on install day are dialed in. Background-checked, uniformed crews show up when scheduled and leave the site clean.
Why Fort Worth Weather Controls the Install Schedule
Sealing work is temperature and moisture sensitive. Caulk, expanding foam, and flashing tape all have manufacturer-specified install conditions, and they exist to protect your home’s envelope. Get it wrong and you trade a clean, watertight install for a slow leak behind your siding.
Most sealants used in Fort Worth installations want temperatures above roughly 40°F and dry surfaces, though the exact number depends on the product. Expanding foam won’t cure properly in cold or wet conditions and it loses its insulating value when it doesn’t cure. Flashing tape needs a clean, dry, often warm substrate to bond. This is why experienced installers plan around Fort Worth’s weather patterns instead of just showing up and hoping.
The Fort Worth Weather Windows That Matter
- Late spring and early summer (May-June): hot but dry enough. Reliable install weather. Watch for pop-up thunderstorms.
- Summer (July-August): hot. Caulk skins fast, so timing matters, but installs happen all day.
- Fall (September-November): the best window in Fort Worth. Moderate temperatures, dry air, low wind. This is peak scheduling season.
- Winter (December-February): the challenge months. Cold snaps drop below sealant temperature minimums, and freezing rain wrecks foam cure. A good crew watches the forecast and pulls install days forward or pushes them back.
- Spring (March-April): hail and heavy rain. North Texas hail season forces schedule flexibility. Nobody installs through active hail.
The lesson: a schedule that leaves zero weather buffer on a Fort Worth job is a schedule someone’s going to blow through. Inexperienced contractors miss this. Experienced ones build the buffer in.
Permits and Inspections: The Step Homeowners Forget
Not every window replacement requires a permit. Simple like-for-like swap-outs in Fort Worth often don’t. But the moment your project touches structural framing, changes an opening size, converts a window to a door, or alters the home’s envelope in a way that affects egress or energy compliance, you need one.
Permit review is where timelines quietly stretch. Fort Worth runs permit review on a rolling basis, and realistic expectations run 1 to 3 weeks for straightforward residential window and door work. Add 3 to 7 additional business days between passing inspection and getting the final sign-off on the job.
What Changes If Your Project Needs a Permit
- Add 1 to 3 weeks for review. Your contractor applies, the city reviews, you get approval to start.
- Installs must meet current code. That includes egress windows in bedrooms and energy requirements on glazing. The crew plans for this.
- Final inspection gets scheduled after install. Plan 3 to 10 business days. The city sometimes runs ahead of that, sometimes behind.
- You receive a closed-out permit. This matters when you sell the home. Unpermitted window work can complicate a real estate transaction.
We pull permits and pass inspections on Fort Worth window and door projects where they apply. That’s part of the job, not an upsell, and it protects your investment. If a contractor suggests skipping the permit to save time, they’ve just told you something important about how they work.
Red Flags in Contractor Scheduling
An unrealistically fast timeline is the single loudest warning sign in this entire process. If someone promises your 22-window replacement with custom-ordered Andersen units will be installed in two weeks, ask how. The answer is always one of two things: they’re not really ordering custom units, or they’re not really telling you the truth.
Scheduling Red Flags to Watch For
- “We’ll have it done in two weeks.” For anything custom-ordered, this is usually impossible in the current market. Ask for the manufacturer’s written lead-time quote.
- No permit discussion. A contractor who never mentions permits may be planning to skip them.
- No weather planning. A crew that ignores Fort Worth weather for sealing work will leave you with a failed seal.
- No written timeline. The schedule should be in the contract, with phase dates.
- Vague delivery dates. “Soon” isn’t a date. You want the manufacturer’s confirmation date.
- No buffer. Real schedules include a few days of slack. Schedules without slack always blow up.
- No inspection plan. If your project requires a permit, the contract should acknowledge the final inspection.
The questions to ask before signing are simple: What’s the manufacturer’s current lead time in writing? Does this project need a permit, and if so, what’s the review timeline? What’s the install-day plan to keep openings sealed? What’s the weather backup plan? What happens if delivery is delayed? Contractors who answer those clearly know what they’re doing. Contractors who get defensive don’t.
Doors Take Longer Than Windows (Here’s Why)
A window is a window. A door is a system. That distinction drives the timeline.
Exterior doors involve a rough opening, a sill pan flashing, a threshold, hinges, hardware, weatherstripping, and often a specific swing configuration and handing. Each of those elements is custom to your opening. A door can sit in a factory queue as long as windows do, and it often takes longer to install because installation is finicky. It’s also a security element, so the stakes are higher if something goes wrong.
- Lead time: 4 to 16 weeks, longer for custom or wood entry doors from higher-end lines.
- Install time: 3 to 6 hours for a standard exterior door, a full day for a sophisticated entry door with sidelites.
- Interior doors: often faster. Stock hollow-core and molded-panel doors can be installed as soon as they’re on site, often same-day as the windows if scheduled together.
- Sliding patio doors: a hybrid. Custom-sized sliders run 6 to 12 weeks for the unit and take 4 to 8 hours to install.
If your project includes multiple door styles across the home, expect the schedule to be set by the slowest item. Plan the door order first.
How to Plan Your Project Around the Timeline
The right way to think about this isn’t “how fast can it happen” but “what’s the realistic sequence and how do I plan around it.” Here’s the framework.
- Start the conversation 3 to 4 months before you want the job done. That’s the buffer between deciding and finishing for most custom-ordered whole-home projects.
- Get the estimate and design consult done first. Measure, product selection, and pricing happen before the order goes in. Rushing this phase never saves time later.
- Lock in the order and confirm the manufacturer’s lead time in writing. This is your anchor date. Everything else hangs off it.
- File permits during the lead time. Don’t wait for the windows to arrive to start the permit. Run these in parallel.
- Schedule install with weather buffer. Two to three days of float around your install window, especially if you’re installing in fall or spring.
- Schedule inspection as soon as install is done. Don’t wait a week to request the final inspection.
- Plan the walkthrough and any touch-up work. The last 5% of any job is the part that gets neglected. Build in the final pass.
And one more: if your window and door project is part of a larger scope, like a home addition or ADU in Fort Worth, sequence the windows into the framing phase, not after. That’s a scheduling call an experienced contractor makes automatically. If your scope also touches the exterior approach or driveway, our team handles Driveway & Pavers in Fort Worth and we can sequence it into the same project calendar. Many Fort Worth homeowners in neighborhoods like Tanglewood, Ryan Place, and Arlington Heights pair a window replacement with perimeter work, so a coordinated plan saves weeks. We also handle Fence Installation in Fort Worth when the project scope calls for it. You can see the full range of service lines back at our Groundwork Construction Co. of Fort Worth home page.
Windows and doors are covered under our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential construction space. If something isn’t right, we come back and make it right. That’s not a marketing line, it’s written into the agreement.
Common Mistakes to Avoid
- Assuming two weeks is realistic for custom windows. Homeowners who plan a remodel around that expectation end up with a plastic-covered opening for a month. Ask for the lead time in writing before you sign.
- Skipping permits on a structural change. Fort Worth permitting exists to protect your resale. Unpermitted window or door work can sink a sale inspection.
- Ordering doors after windows on the same project. Doors usually have longer lead times. Order the slowest item first.
- Scheduling install in the middle of a north Texas cold snap or hail event. Sealant won’t bond, foam won’t cure. Check the forecast before you lock the install date.
- Letting multiple rooms go unsealed at once. A crew that tears out 10 windows before installing one is a crew that’s cutting corners. Insist on a room-by-room or section-by-section sequence.
- Getting a verbal timeline and nothing in the contract. Written phase dates, delivery confirmation, and inspection plan belong in the signed agreement.
- Forgetting the final inspection. That close-out document matters when you sell. Build in the 3 to 10 business days for inspection scheduling.
See the difference
Before
After
Before
After
Before
AfterWhen to Call a Professional
There are a handful of scenarios where this project is not a DIY job, and honestly a couple where it’s fine. One window in a standard opening on a single-story ranch home? A capable homeowner can do an insert replacement. Anything else, call us. Full-frame replacements, whole-home jobs, exterior doors, anything with a permit or structural change, and any home over two stories fall firmly into professional territory. That’s not because the work is exotic, it’s because the sealing, flashing, and structural elements are what protect your home’s envelope for the next 30 years. If something’s off, the leak starts behind your wall where you can’t see it for a year. Groundwork Construction Co. of Fort Worth offers free estimates in Fort Worth. Call (855) 912-5373 to schedule a design consult and get a written timeline with real delivery dates before you commit to anything.
Frequently Asked Questions

For a typical 15- to 25-window home in Fort Worth, plan 6 to 10 weeks from signed contract to final walkthrough. That includes 2 to 4 weeks of stock lead time or 6 to 14 weeks for custom units, plus 1 to 3 days of installation and, if a permit is required, 1 to 3 weeks of review and 3 to 10 business days for final inspection. The install itself is fast. The clock is dominated by lead times and permits. Call (855) 912-5373 for a project-specific estimate with real dates attached.
Yes, if your units are stock sizes and no permit is required. Stock insert replacement in Fort Worth can realistically be done in 3 to 4 weeks from signed contract. The moment you go custom, full-frame, or need a permit, that math stops working and 6 to 12 weeks is the honest number. Ask your contractor which category you fall into before you set expectations. Estimates from our team are free, and we quote lead times in writing. Call (855) 912-5373.
Not with our process. Upfront pricing means the number you sign is the number you pay, and change orders only happen when you request a scope change in writing. That’s a hard line with us. If a different contractor quotes you a window price and then mentions “surprises” once the walls are open, that’s a red flag, not a normal process. Call (855) 912-5373 for a written line-item quote before you commit.
Yes, when a permit is required. Structural changes, opening-size changes, window-to-door conversions, and envelope alterations in Fort Worth all require permitting in most cases. We file, coordinate review, schedule the final inspection, and hand you a closed-out permit. Skip the permit and you compromise your resale. We don’t skip permits. Call (855) 912-5373 to talk through your specific scope.
We inspect every unit on delivery and reject damaged product before it goes in. When a factory unit arrives wrong or broken, we file the replacement claim and re-order same day. Realistic impact on your schedule is 1 to 3 weeks for a stock replacement unit and 4 to 8 weeks for a custom reorder. That’s one reason a credible schedule always includes a few days of float. Call (855) 912-5373 and we’ll walk you through what the buffer looks like on your project.
Not safely. Sealants, flashing tape, and expanding foam all need dry conditions and temperatures above the manufacturer’s specified minimum, usually around 40°F for most sealant products used here in Fort Worth. Working outside that window risks the seal failing, which shows up as a leak behind your siding a year later. We monitor the forecast and reschedule install days around north Texas cold snaps and hail events. If you want a schedule built with weather in mind, call (855) 912-5373.
The Bottom Line
The full timeline on a window and door project is controlled by lead times, permits, and weather, not by how fast the crew can swing a hammer. Stock windows and no permits get you a finished job in 3 to 4 weeks. Custom units, structural changes, or a permit put you in the 6 to 16 week range realistically. Installation itself is fast: 1 to 5 days for most whole-home scopes. What separates a smooth project from a plastic-covered nightmare is a contractor who plans the sequence honestly, quotes lead times in writing, builds in weather buffer, pulls permits and passes inspections, and backs the work under a written guarantee. That’s the job. The rest is marketing.
Groundwork Construction Co. of Fort Worth offers free project estimates and design consults across Fort Worth. No-hassle upfront pricing, live-person phone answering around the clock, background-checked uniformed technicians, and premium products from brands like Sterling and Andersen. Call (855) 912-5373 to schedule your free estimate and get a real timeline with real dates before you sign anything. We’re ready when you are.
Written by the team at Groundwork Construction Co. of Fort Worth.


