







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Bedford: What the Job Actually Involves
New cabinets and countertops in Bedford typically run $14,000 – $45,000 for a full kitchen, with cabinet installation alone landing between $4,000 and $13,000 and countertop installation between $2,000 and $6,500. A straight swap of like-for-like boxes and slabs takes about two to three weeks of working time; anything that moves a sink, adds an island, or chases an out-of-square wall in a 1970s Bedford ranch stretches toward five. Call (855) 912-5373 and we’ll walk your kitchen and give you a line-item number, free.
How we run a cabinets and countertop job, stage by stage

Most contractors treat this as one blurry phase. It’s really five, and each one has a decision that’s yours to make before we can move on.
Stage 1: Measure and template (day 1, about 90 minutes). We measure the room, check the walls for plumb and the floor for level, and photograph everything behind the existing cabinets once they come out. In Bedford’s older homes the reveal is usually the story: a wall that bows a half-inch over eight feet, or a floor that drops toward the middle of the slab. You decide the cabinet layout and door style here so the order can go in. Custom and semi-custom boxes take four to eight weeks to arrive; stock lines can be days.
Stage 2: Demo and rough-in prep (days 1 – 2). We pull the old cabinets and counter, cap or reroute the plumbing and electrical, and patch and level what’s left behind. If a wall is moving or a range is being relocated, this is the day that triggers a permit inspection in Bedford, so we schedule it early rather than discovering it mid-install. You decide whether the old sink and disposal stay or get replaced; if you’re going to upgrade, do it now, not after the counter is drilled.
Stage 3: Cabinet install (days 3 – 5). Boxes go in, shimmed and scribed to the actual walls, uppers hung, crown and fillers fitted. Semi-custom and stock cabinets hide a lot of sin with filler strips; custom gives you tighter tolerances but a longer lead time. You confirm hardware placement and any pull-out or drawer-organization choices before we drill.
Stage 4: Template and fabricate the countertop (days 5 – 12, mostly waiting). Once the cabinets are set, the countertop gets templated. Stone is cut off-site, which is where the week goes. This is the stage homeowners underestimate: the kitchen is unusable and there’s nothing to do but wait. You pick the slab, the edge profile, and the sink cutout detail before templating.
Stage 5: Counter install, sink, and final walkthrough (days 12 – 14). The slab goes down, the sink and faucet get set, seams are finished, and we walk the job with you. If anything is off, the 730-Day Done Right Promise covers it: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
The material decision drives both the budget and how the kitchen lives ten years from now. Here’s the honest version of each.
- Stock cabinets (roughly $4,000 – $7,000 for a typical Bedford kitchen): Fastest to get because they’re made in fixed sizes, with limited finish and door choices. Fine for a rental or a tight budget. You’ll use more filler strips to close gaps against an out-of-square wall.
- Semi-custom (roughly $7,000 – $13,000): The sweet spot for most homes here. More sizes, more door styles, plywood box upgrades available. KraftMaid and Wellborn both live in this tier, and both hold up well in a kitchen that sees real cooking.
- Custom cabinets: Built to the inch, best tolerances, longest lead time and the highest price. Worth it when the layout is unusual or the ceiling height is odd.
- Quartz (roughly $2,000 – $6,500 installed): Non-porous, no sealing, consistent pattern. Cambria is the benchmark most of our customers compare against. The trade-off is that it can’t take a hot pan the way stone can, and you don’t get the natural movement of granite.
- Granite: Every slab is different, it tolerates heat well, and it needs periodic sealing. Popular in older Bedford homes because it’s a known quantity.
- Laminate: The budget play. It’s improved a lot and reads well from a few feet away, but it will show wear at the sink and edges within a decade.
One more decision most people forget: the drawer and door hardware. It’s a few hundred dollars that changes how the whole kitchen feels, so pick it before the cabinet order is final, not after.
What Cabinets & Countertops costs in Bedford, TX

The realistic range for this job in Bedford is $14,000 – $45,000. That’s a wide spread on purpose, because five variables do most of the moving:
- Kitchen size and layout. A galley with twelve linear feet of cabinet costs a fraction of an L-shaped kitchen with an island and a pantry wall.
- Condition behind the old cabinets. Water damage, rot, or a wall that needs reframing adds labor nobody can see on day one. This is where Bedford’s older homes surprise people.
- Whether anything moves. Relocating a sink, range, or dishwasher means new plumbing and electrical rough-in, plus a permit and inspection. Keep the fixtures in place and the number drops noticeably.
- Material grade. Laminate and stock boxes versus quartz and semi-custom is a five-figure swing on its own.
- Add-ons. An island ($3,000 – $10,000), a new backsplash ($800 – $2,500), new lighting, and under-cabinet electrical all stack onto the base number.
A written estimate from us covers demolition, cabinet supply and install, countertop template and install, sink and faucet set, haul-away, and finish carpentry. What it typically won’t cover unless we scope it in: appliance costs, structural changes, plumbing or electrical beyond a straightforward swap, and drywall or paint repair outside the immediate work zone. We put those in writing as line items rather than a contingency pot, so the number you see is the number you pay. No-hassle upfront pricing, no change orders you didn’t approve.
See the difference
Before
After
Before
After
Before
AfterWhat Bedford homes specifically do to this job
Bedford is a fully built-out mid-cities suburb. There’s essentially no undeveloped land left, so almost every kitchen job here is a renovation inside a house that’s already standing, and a lot of those houses went up between the 1960s and 1980s. That matters because in ZIPs 76021 and 76022 we’re routinely pulling original cabinets that were nailed to walls that have since settled on North Texas clay, and the walls themselves are rarely square. We plan for scribing and shimming on every one of these jobs, because assuming a plumb wall is how a cabinet run ends up with ugly gaps and a bowed counter seam.
The other thing Bedford does to a kitchen job is the permit process. Because the city operates under an established code and inspection system rather than greenfield subdivision approvals, any job that moves a wall or relocates plumbing or gas gets reviewed, and the rough-in inspection happens before the cabinets go in, not after. That’s a scheduling reality, so we build it into the timeline. Skip it and you may be opening finished walls later.
Hail season and summer heat shape the calendar too. Big exterior work around the house gets bunched into spring and fall, which frees up interior kitchen work for the hottest midsummer weeks. If you’re planning Kitchen Remodeling in Bedford as part of a wider scope, the same logic applies to sequencing. And if the kitchen is being carved out of a garage or a back room, homeowners often pair it with a Garage Conversion ADU in Bedford or a New Detached ADU in Bedford, which we handle as a single coordinated project rather than two separate contractors. You can see the full range of work we cover across Bedford and read more about our Kitchen Remodeling service.
Serving Bedford, TX – Our Local Coverage Area
We serve Bedford and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in Bedford

Plan on two to three weeks of working time for a straight swap, and four to five weeks if anything moves or the cabinets are custom-ordered. The single biggest variable is the countertop fabrication window, since stone is cut off-site after templating. Call (855) 912-5373 and we’ll give you a timeline for your specific kitchen.
No permit is needed if you’re replacing cabinets and countertops in the same footprint with no plumbing or electrical changes. You do need one if a wall moves, a sink or range is relocated, or electrical circuits change, because the rough-in gets inspected before the cabinets are installed. Estimates from us always say which of those applies.
Yes. Keeping the sink, dishwasher, and range in their current locations is the most common approach, and it’s the cheapest and fastest way to do this job. The trade-off is that the old layout’s quirks stay put. We’ll tell you honestly whether a small move is worth the added scope.
Expect $14,000 – $45,000 for a full kitchen, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 as separate line items. The low end usually means stock boxes, laminate or entry-level quartz, and the same footprint; the high end means custom or semi-custom cabinets, Cambria or granite, an island, and a fixture relocation. Call (855) 912-5373 for an exact quote – estimates are free.
Every cabinets and countertops project we complete is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Cabinet and countertop manufacturer warranties apply separately on top of it, and we’ll explain how each one works at your estimate.
Ready for a real number on your Bedford kitchen?
Call (855) 912-5373 to schedule your free on-site estimate for cabinets and countertops in Bedford. A live person answers, 24/7, and a background-checked technician comes out, measures the room, and hands you a written line-item quote with the materials and durations spelled out. Qualifying projects over $10,000 get $1,000 off, and 0% financing for 18 months is available.
Written by the team at Groundwork Construction Co.












