







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Concrete Driveways & Concrete Work in Kennedale, TX: What It Takes and What It Costs
Concrete driveways and concrete work in Kennedale typically run $4,500 – $12,000 for a new driveway, and a full replacement lands between $5,000 and $14,000. Most driveways pour in 3 to 5 working days once the subgrade is ready, though expansive clay and Kennedale’s own inspection schedule can stretch that. For a firm number on your lot, call (855) 912-5373 and we’ll walk the property with you.
From Staking to Cure: How a Concrete Driveway Actually Gets Built

Concrete is unforgiving of shortcuts. Once it sets, whatever is underneath stays underneath. That’s why the schedule below front-loads the prep and treats the pour as the easy part.
Stage 1: Site walk and layout (day 1)
We measure the approach, check overhead clearance, note where the downspouts and gas meter sit, and flag slope toward or away from the garage. You decide the width (a single-car apron at 12 feet or a double at 20 to 24), the thickness, and whether the finish is broom, exposed aggregate, or a light stamp. On a Kennedale lot with a detached shop set back from the road, we also confirm the run length here, because a 90-foot drive prices very differently from a 40-foot one.
Stage 2: Demo and haul-off (1 to 2 days)
Old slab, root-bound soil, and failed base all come out. We cut clean at the expansion joint or at the street apron so the saw line reads intentional. A typical single-width driveway generates three to six dumpster loads of broken concrete, and that hauling is a real line item, not a hidden fee. You sign off on the demo limits before the first cut.
Stage 3: Subgrade, formwork, and reinforcement (2 to 3 days)
This is where the money lives. We excavate to depth, proof-roll the subgrade, and bring in select fill where the native soil won’t compact. North Texas clay moves with moisture, so we build to a 4-inch slab on a compacted base as the default and step up to 5 or 6 inches for heavy trucks or RV pads. Rebar or welded wire goes in on chairs, never laid flat on the dirt. Forms get set to the final grade, and you confirm the slope before we pour.
Stage 4: Inspection and pour (1 day plus cure time)
Kennedale runs its own permitting and inspections rather than deferring to Tarrant County, so the subgrade and forms get checked on the city’s schedule, not ours. Once the green tag is on, the pour takes a morning: placement, screeding, floating, then the finish you picked. Control joints get cut within 24 hours to steer cracking to where it belongs.
Stage 5: Strip, seal, and cure (3 to 5 days of hands-off time)
Forms come off, we wash the surface, and you get a curing plan. No vehicles for about seven days, no heavy loads for 28 if you can manage it. A cure-and-seal coats the slab and slows moisture loss, which matters in a Texas summer. We walk the finished job with you and put the 730-Day Done Right Promise behind the work.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Concrete Options You’ll Choose Between
Every choice below changes the number and the service life. Here’s the honest version of each.
- Standard broom-finish slab: the workhorse. Gives traction, hides tire marks reasonably well, and sits at the low end of the $4,500 – $12,000 range. Suits most Kennedale driveways.
- Exposed aggregate: attractive and grippy, but adds roughly 15 to 25 percent to the surface cost and can be harder to clean. Good for a visible front approach.
- Stamped or decorative concrete: looks like stone or pavers for less than a real paver install, but freezes and sealers need refreshing every few years. If you want a genuine paver look, that’s a different job and we’d point you to our Driveway & Pavers service.
- Slab thickness: 4 inches for cars, 5 to 6 inches with heavier rebar for trucks, trailers, or a shop approach. Thickness is the cheapest insurance you’ll buy.
- Mix and admixtures: we spec mixes from Quikrete or Sakrete for smaller placements and ready-mix for full pours, with air entrainment and a water reducer to survive freeze-thaw and summer heat.
- Drainage and grade: a swale, channel drain, or apron detail at the garage keeps water out. On long rural drives, this is often the difference between a slab that lasts and one that heaves.
What Concrete Driveways & Concrete Work Costs in Kennedale, TX

Plan on $4,500 – $12,000 for a new concrete driveway and $5,000 – $14,000 for a full replacement that includes demo and haul-off. Five variables push a job toward one end or the other:
- Square footage and thickness: a 400-square-foot single drive sits near the bottom; a 1,200-square-foot RV pad with 6-inch slab moves to the top.
- Existing condition: a clean tear-out is cheap. Root invasion, a buried old slab, or failed base means more excavation and more hauling.
- Site access and utility relocation: moving a sprinkler line, gas stub, or meter adds cost. We say so upfront rather than surprising you mid-pour.
- Finish and reinforcement: broom and wire mesh is the baseline; exposed aggregate, stamping, and heavier rebar add to it.
- Permit and inspection scope: Kennedale’s own submittal process carries a fee and a timeline that a drive in an unincorporated area doesn’t.
A written estimate from us lists demo, haul-off, base prep, reinforcement, the pour, finish, joints, and sealing line by line. It doesn’t include landscaping repair, fence or gate relocation, or a new apron if the street cut requires one – those get their own line if you need them. Upfront pricing means the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Kennedale Homes Specifically Do to This Job
Kennedale is a small, largely built-out city of roughly 8,000 people wedged between Arlington, Mansfield, Burleson, and Fort Worth, so most of the work here is infill: additions, detached shops, and remodels on lots that already have a house on them. Because the city runs its own permitting and inspections instead of deferring to Tarrant County, crews working in 76060 have to learn Kennedale’s submittal rhythm, which is different from the neighboring cities they work in the same week. That affects your pour date – plan for it.
The housing stock mixes older rural and mid-century homes on generous lots with newer custom builds, which means we’re often pouring a drive out to a shop or barndominium set well back from the street. Long runs bring long utility trenches, separate meter or subpanel decisions, and slab drainage that simply don’t come up on the tighter lots in Mansfield or Arlington. Expansive clay under all of it swells and shrinks with the seasons, so the base prep matters more here than the mix design. Homeowners often pair a new slab with ADU Site Prep & Utilities in Kennedale when they’re building out back, and Door Installation in Kennedale once the garage and entry get reworked. If the drive is part of a full exterior package, start with our Driveway & Pavers in Kennedale page for the wider scope, and see everything we cover across Kennedale.
Serving Kennedale, TX – Our Local Coverage Area
We serve Kennedale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Concrete Driveways & Concrete Work in Kennedale

A typical concrete driveway in Kennedale takes 3 to 5 working days from demo to finished pour, plus about 7 days before you drive on it and 28 days to full cure. The Kennedale inspection step can add a day or two depending on the city’s schedule. Call (855) 912-5373 for a timeline on your specific lot.
Yes, most new driveways and structural slabs in Kennedale require a permit through the city’s own permitting office, and the subgrade and forms get inspected before the pour. We pull the permit and manage the inspection so you’re not chasing it. Call (855) 912-5373 and we’ll confirm what your project needs.
In most cases, yes – a standard driveway replacement stays clear of plumbing and structural elements. If the drive runs over a utility line, sprinkler main, or gas stub, those get relocated or protected, and that’s a cost item we flag upfront. Call (855) 912-5373 for an on-site look.
Concrete driveway replacement in Kennedale runs $5,000 – $14,000, with new installation at $4,500 – $12,000. Size, thickness, tear-out condition, finish, and Kennedale’s permit scope are the drivers. Call (855) 912-5373 for an exact written estimate – it’s free.
Every concrete driveway and slab we pour is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. The finish, joints, and base prep are all backed in writing. Call (855) 912-5373 to schedule your free estimate.
Get a Free Concrete Estimate in Kennedale
Call (855) 912-5373 to schedule a free on-site estimate for concrete driveways and concrete work in Kennedale. We’ll walk the property, measure the run, flag any utility or drainage issues, and hand you a written line-item quote with upfront pricing. A live person answers around the clock, and there’s no pressure on the call – just a real number for your project.
Written by the team at Groundwork Construction Co.












