







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Kennedale, TX: What the Job Actually Takes
Paver driveways in Kennedale typically run $7,000 to $18,000 for a standard two-car apron, and most jobs are finished in three to five working days once materials land on site. The work itself is excavation, a compacted aggregate base, edge restraint, and pavers set and plate-compacted in lifts. Because so many properties in 76060 sit on acreage with detached shops and long approaches, the number that moves most is length. Call (855) 912-5373 and we’ll walk your driveway and put real numbers on it.
How We Build a Paver Driveway, Stage by Stage

Paver work is mostly invisible. The pavers are the last 10% of the job, and the base is the other 90%. Here’s the sequence we follow in Kennedale, with the decisions that land on you at each step.
Stage 1: Layout and excavation (day one). We mark the drive, confirm slope and drainage direction, and cut out the existing surface down to subgrade. Most drives here need 8 to 12 inches of removal to make room for base and bedding. You decide the paver pattern and the edge treatment before we cut, because changing layout after excavation is the most expensive kind of change order.
Stage 2: Base and compaction (day one into day two). Crushed aggregate goes in 2 to 3-inch lifts, each one watered and plate-compacted before the next. On Kennedale’s expansive clay, we also check that the subgrade is draining and not trapping water against the slab or shop apron. You’ll see the base inspected before anything gets covered.
Stage 3: Edge restraint and bedding (day two). We set the edge restraint and screed the bedding sand to grade. Edges are what keep a drive from spreading under Texas heat, so this is not where anyone should cut corners.
Stage 4: Paver installation (days two and three). Pavers go down, get cut at the edges and around any drainage, and are plate-compacted in lifts. We check grade against the garage slab so water runs away from the door instead of into the shop bay.
Stage 5: Joints, cleanup and walkthrough (final day). We sweep polymeric joint sand in, activate it, clean the surface, and walk the drive with you. That walkthrough is where we cover the 730-Day Done Right Promise and what it covers. If your drive ties into a wider rebuild, that work lives on our Driveway & Pavers in Kennedale page.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most of the money on a paver drive is decided in two conversations: what stone, and what thickness. Here’s what actually gets picked on Kennedale properties, with the honest trade-offs.
- Standard 60mm interlocking pavers. The default for a driveway. Solid under vehicle loads, moderate cost, and easy to lift and reset a single stone if it ever shifts. Cambridge Pavers and Oldcastle lines both carry options in this class with matching color families.
- Heavier 80mm pavers. Worth the step up on long approaches and shop aprons where a loaded trailer or a heavy truck turns. Costs more per square foot, but it resists rutting better on a drive that sees real weight.
- Permeable pavers. Open-joint or gapped systems that let water pass through the base. A good fit on acreage lots with runoff concerns, and they reduce puddling. Expect a premium and a base build that has to be done exactly right.
- Edge restraint type. Plastic edge with spikes is standard. On a long Kennedale drive, a poured concrete curb edge holds up better against spread and looks cleaner over time.
- Joint sand. Polymeric sand locks joints and resists washout. Quikrete and Sakrete both make products in this category. It’s a real upgrade over plain sand on a slope or a drive that catches runoff.
- Color and pattern. Running bond, herringbone, and basketweave all work; herringbone locks best under turning tires. Color is taste, but a lighter stone stays noticeably cooler underfoot in a North Texas summer.
Our Driveway & Pavers service covers the full range of hardscape work if your plans grow past the drive.
What Paver Driveways Cost in Kennedale, TX

Paver driveway installation in Kennedale runs $7,000 to $18,000. That spread is driven by five variables, and knowing them is how you read a bid instead of guessing at it.
- Length and width. A short two-car apron sits at the low end. A long approach out to a detached shop pushes toward the top, since every extra foot means more excavation, more base, and more pavers.
- Existing surface and access. Tearing out old concrete or asphalt adds demo and haul-off. Tight access for a skid steer on a narrow approach also adds labor.
- Base depth and soil conditions. Clayton and expansive clay in this area means base depth matters. A deeper, well-drained base costs more up front and saves you from settling two summers later.
- Paver grade and pattern. 80mm stone and complex patterns cost more than 60mm in a simple running bond. Permeable systems carry a premium too.
- Drainage and tie-ins. Adding a channel drain, tying into a shop apron, or re-grading to move water away from a structure all add scope.
A written estimate from us lists excavation, base material and compaction, edge restraint, pavers, joint sand, cleanup, and haul-off as separate line items. Some bids quote a single number and skip the base spec, which is where the shortcuts hide. Upfront pricing, no surprises is how we quote it. If your project also touches other parts of the home, homeowners often pair this with Door Installation in Kennedale while the crew is out. Call (855) 912-5373 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Kennedale Properties Specifically Do to This Job
Kennedale runs its own permitting and inspections rather than deferring to Tarrant County, and that matters here more than on a subdivision rebuild in neighboring Mansfield or Arlington. In 76060, the submittal and inspection rhythm is the city’s own, so a paver driveway that changes grade, ties into a new shop slab, or sits over new drainage gets planned around Kennedale’s inspection schedule rather than a county one. We build that into the timeline instead of discovering it mid-job.
The housing stock is the other half of the story. Lots here mix older rural and mid-century homes with newer custom builds and small-acreage properties, which means detached shops and barndominiums set well back from the street are common. That’s why paver drives here often run long, and why drainage and slope get more attention than they would on a tight in-town lot. Expansive clay soil under all of that is the real reason a base built thin in June looks fine and heaves by the following spring. If you’re on acreage outside the older core, the same drive may also see a loaded trailer, which is where 80mm paver comes in.
And because the city is largely built out, most work here is infill – additions, shop builds, and remodels on existing lots – so a paver drive frequently ties into a larger project. If that’s your plan, our crew already covers Kennedale and the surrounding area.
Serving Kennedale, TX – Our Local Coverage Area
We serve Kennedale and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Kennedale

A typical two-car paver driveway in Kennedale takes three to five working days from excavation to walkthrough, assuming weather holds. Longer approaches out to a detached shop can stretch to a week, mostly because of the extra base prep and compaction.
It depends on scope. A paver driveway that sits at existing grade usually doesn’t need a permit, but anything that changes grade, adds drainage, or ties into a new slab or shop apron can. Since Kennedale runs its own inspections, we confirm the requirement with the city before work starts and pull what’s needed.
Usually not. Paver drives need a properly compacted base, and laying pavers over an existing surface almost always leads to settling and shifting. The right approach is to remove the old surface and build the base from subgrade up.
Expect $7,000 to $18,000, with length, existing surface, base depth, paver grade, and drainage all moving the number. Call (855) 912-5373 for an exact quote – estimates are free.
Every paver driveway we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. The guarantee covers our workmanship on the base, edge restraint, and installation, so settling or shifting gets addressed, not ignored.
Get a Free Paver Driveway Estimate in Kennedale
If you’re planning paver driveways in Kennedale, start with a free on-site estimate at (855) 912-5373. We’ll walk the property, check grade and base conditions, and put a written, line-item number in your hands so you know exactly what you’re paying for. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.












