







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterAluminum Fence Cost in Fort Worth, TX: What You’ll Actually Pay Per Foot
Installed aluminum fence in Fort Worth runs $4,000 to $10,000 for a typical residential yard, or roughly $28 to $55 per linear foot depending on style, height, and grade. A basic 4-foot 3-rail flat-top runs near the bottom of that range; a 5-foot spear-top with raked panels on a sloped northwest lot pushes toward the top. For an exact number on your property, call (855) 912-5373 – estimates are free, upfront, and the number you see is the number you pay.

Fort Worth sees golf-ball hail every few years. That fact should shape how you buy aluminum fence here, and it’s the part most cost guides skip entirely. Two fences that look identical on a showroom floor can behave completely differently when a two-inch hailstone hits a picket at 80 mph. One absorbs the strike with a dent. The other cracks at every weld and starts dropping pickets by the second storm season. The difference isn’t brand name. It’s wall gauge and powder-coat thickness, and both show up in your quote as real dollars.

What Determines Aluminum Fence Cost in Fort Worth?
Four things drive the price, and only one of them is about appearance. The others are about how long the fence survives North Texas weather.
- Wall gauge (thickness). Builder-grade aluminum pickets are commonly .050″ wall. Hail-resistant residential spec is .065″. That 30% thicker wall is the single biggest cost variable and the single biggest predictor of dent and weld-crack resistance. Ask for the gauge in writing before you sign.
- Powder-coat thickness. A finish in the 2-3 mil range protects against oxidation but chips on impact. Specs in the 3-5 mil range with a proper pretreatment hold up better against Fort Worth’s UV load and hail abrasion. This is where cheap imports cut corners first.
- Style and height. 3-rail flat top, spear top, 2-rail puppy picket, and racked vs. straight panels all price differently. Height above 5 feet adds cost fast.
- Grade change and fabrication. Rolling terrain means raked panels, stepped runs, and custom cutting. Flat-lot pricing never captures this.
We measure grade change before we quote, not after the panels arrive. That’s the difference between a number that holds and a change order you didn’t see coming. If you want the full picture of how we run a fence project from first measure to final walkthrough, see our Fence Installation in Fort Worth page.
Aluminum Fence Cost by Style and Grade in Fort Worth
Here’s how the numbers actually break down for Fort Worth properties. Ranges are installed cost – materials, labor, posts set in concrete, gates, and cleanup included.
| Style / Grade | Installed Cost Range |
|---|---|
| 2-rail puppy picket, 4 ft, residential | $28-$36 per linear foot |
| 3-rail flat top, 4 ft, .065 wall, residential | $32-$42 per linear foot |
| 3-rail flat top, 5 ft, .065 wall, residential | $38-$48 per linear foot |
| Spear top, 5 ft, .065 wall, residential | $42-$55 per linear foot |
| Commercial grade, 6 ft, heavier posts | $55-$75 per linear foot |
| Raked or stepped install on sloped lot | Add $6-$14 per linear foot |
| Standard walk gate (3-4 ft) | $350-$750 each |
| Drive gate (10-12 ft, decorative) | $1,200-$2,800 each |
A full Fort Worth aluminum fence project lands in the $4,000-$10,000 range for most residential yards. The lead range you were quoted is real – but the spread inside it is wide, and it’s the gauge and grade that move the number. One thing worth saying plainly: our home page carries the same pricing philosophy across every trade. Upfront, itemized, no post-contract surprises.

Hail, .065 Wall, and the Powder-Coat Spec That Matters
If you remember one technical point from this page, make it this: the wall gauge of an aluminum picket determines whether a hail strike dents or cracks it. .050″ wall is builder-grade and common at big-box suppliers. .065″ wall is residential hail-resistant spec. The .015″ difference sounds small. It isn’t – it’s roughly 30% more aluminum between the hailstone and the hollow interior of the picket, and it changes how the panel absorbs impact energy across the welds.
Powder coat works the same way. A coating under 2 mil that chips at the weld joint exposes bare aluminum to the atmosphere. In Fort Worth, bare aluminum oxidizes at cut ends and weld scars, which is why a “no-maintenance” aluminum fence can look chalky within a few seasons if the install crew didn’t cap cut ends and touch up field cuts. Our crews cap cut ends and touch up field modifications at installation – it’s a small detail that separates a ten-year fence from a twenty-five-year fence.
Every material selection we make comes from curated brand partnerships with documented specifications. That means you know the gauge and coating spec of the fence you’re buying before the contract is signed, not after the panels arrive on a truck. Boral and other supplier partners we work with provide spec sheets as standard practice – we hand those to you.
Aluminum vs. Wrought Iron: The Fairmount and Ryan Place Question
Homeowners in Fairmount and Ryan Place often want the period-correct look of wrought iron for their Craftsman and bungalow blocks. Aluminum gets you 90% of that aesthetic for a fraction of the maintenance, and here’s the difference that matters over a decade: aluminum doesn’t rust, but it will oxidize at cut ends if the finish isn’t properly capped. Real wrought iron doesn’t oxidize the same way but will rust at every field weld and scratch point – and in North Texas summer heat, keeping a wrought iron fence rust-free means repainting every 3-5 years.

Wrought iron typically runs 2-3x the cost of comparable aluminum and weighs considerably more, which raises install labor. For most Fairmount and Ryan Place homeowners, aluminum gets the look, skips the repainting cycle, and stays within the $4,000-$10,000 budget. Where it doesn’t: if you’re restoring a property that demands true wrought iron fabrication for historic reasons, that’s a different conversation. Ask us and we’ll tell you straight which side of the line you’re on.
Why Grade Change Changes the Quote in Far West Fort Worth
Fort Worth’s rolling northwest terrain – Aledo, the far west custom lots past Loop 820, and the new builds pushing toward Walsh Ranch – routinely has 3 to 6 feet of grade change across a single property line. Flat-lot aluminum fence pricing assumes level ground. On a sloped lot, that assumption breaks fast.
Raked panels follow the slope with the pickets staying vertical. Stepped panels run level between posts, stepping down at each post. Both require custom fabrication, more posts, and more labor. That’s why a quote from a flat-lot contractor can land 30-40% below what the install actually costs once the crew starts cutting. We measure grade change in the first visit. The raked or stepped surcharge is in your quote from day one, not added later.
Historic-district overlay review is another Fort Worth reality worth flagging. Fairmount and Ryan Place carry design-review requirements, and what passes in a new subdivision won’t pass on a 1920s bungalow block. We pull permits and handle review for fence projects where the overlay applies. If you’re working through it, our broader Fence Installation service notes cover the review process across the trade.
What Should You Ask Before Hiring an Aluminum Fence Contractor in Fort Worth?
Ask for four things in writing, and don’t accept verbal answers. First: picket wall gauge, stated as a number (.065″ or .050″). Second: powder-coat thickness in mils, plus the pretreatment spec. Third: raked vs. stepped, and whether the quote includes the grade-change surcharge. Fourth: how cut ends and field modifications are finished and capped.
A contractor who can’t answer all four in writing isn’t selling you a spec – they’re selling you a look. Groundwork Construction Co. of Fort Worth quotes material spec by name from documented supplier partnerships, and every fence project carries our 730-Day Done Right Promise. If it’s not done right, we make it right – that’s true at the 2-year mark and at the 700-day mark.
FAQs
Aluminum fence in Fort Worth costs $4,000-$10,000 installed for a typical residential yard, or $28-$55 per linear foot depending on style and gauge. .065″ wall pickets with proper powder coat land at the higher end and last meaningfully longer under hail. Call (855) 912-5373 for an exact quote on your property – estimates are free.
Yes, for a Fort Worth property, .065″ wall pickets are worth the extra $3-$6 per linear foot. The thicker wall resists hail dents and weld cracking that .050″ builder-grade pickets take in a single storm season. Over a 20-year fence life, the upgrade pays back fast. Call us to see the spec difference side by side – (855) 912-5373.
Yes – raked and stepped installs on Fort Worth’s rolling northwest terrain are routine for us, typically adding $6-$14 per linear foot for custom fabrication and extra posts. We measure grade change on the first visit so the surcharge is in your quote, not a surprise later. Call (855) 912-5373 and we’ll walk your slope before quoting.
Most residential aluminum fence installs in Fort Worth complete in one to two days, weather permitting, once panels arrive from the supplier. Custom raked and stepped runs on sloped lots can add a day for fabrication. Call (855) 912-5373 to schedule your measure and design consult – free of charge.
Get a Free Aluminum Fence Estimate in Fort Worth
Your number should be specific, itemized, and hammered out before a single post goes in the ground. Upfront pricing, no surprises – call (855) 912-5373 for a free project estimate and design consult. Live person, 24/7. $1,000 off projects over $10,000, 0% financing for 18 months, and a 730-Day Done Right Promise on the work. From foundation to finish line, built to last and backed in writing.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












