







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Forest Hill, TX: What the Job Actually Involves
A paver driveway in Forest Hill typically runs $7,000 to $18,000 for a standard two-car approach, and most projects take four to seven working days from demo to final sand. The work means removing the old surface, rebuilding a compacted aggregate base, setting interlocking pavers on a bedding layer, cutting edges, and locking everything in with polymeric sand. Call (855) 912-5373 and we’ll walk your driveway and put a written, line-item estimate in your hands.
How We Build a Paver Driveway, Stage by Stage

Paver driveways live or die on what’s underneath them. The visible stone is the easy part. Here’s the real sequence we follow on Forest Hill jobs, and where you’ll be making decisions.
Day 1: Site check and demolition
We mark utilities first, then break out and haul off the existing concrete, asphalt, or old pavers. On the tight 1950s lots off the Mansfield Highway corridor, that haul-off is its own puzzle: narrow streets, mature trees, and no space to stage a dumpster where it won’t block a neighbor. Expect a full day just for demo and clearing on most Forest Hill driveways. You decide nothing here except where the debris truck can park.
Day 2: Excavation and base prep
We excavate to depth: roughly 6 to 8 inches of compacted crushed aggregate beneath a 1-inch bedding sand layer for a residential drive. This is the stage that decides whether your pavers stay flat through North Texas clay movement or rut within two summers. We compact in lifts, not all at once. You’ll confirm the final grade and drainage slope here, because water has to run away from the garage, not toward it.
Day 3: Edge restraint and bedding
We set a concrete or steel edge restraint on the exposed sides so the field can’t creep outward, then screed the bedding sand to a consistent depth. This is where a lot of cut-rate jobs get skipped, and it’s why cheap paver driveways in Forest Hill start spreading at the apron within a few years. You decide nothing on this day. We just need the driveway clear.
Days 4 and 5: Paver install and cuts
The field goes down in a herringbone or running-bond pattern, whichever you chose at estimate time. Herringbone interlocks better under tire load; running bond is faster and reads cleaner on a long, narrow approach. We cut perimeter and apron pavers with a wet saw for clean edges. A two-car Forest Hill driveway usually takes a day and a half to two days of setting.
Day 6 and 7: Polymeric sand and final walk
We sweep polymeric sand into the joints, activate it with water, and let it cure. Then we walk the job with you, check slope, and hand over care instructions for the first season. Your last decision is the pattern and color, made well before day 4 so the material is on site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
This is the part where the price swings the most. The honest trade-offs:
- Concrete pavers vs. clay brick pavers. Concrete pavers are the value pick and hold color well; clay brick pavers cost more but age with a character many Forest Hill homeowners want on a mid-century ranch. Concrete pavers fit most budgets, clay brick suits a heritage look.
- Standard 60mm vs. heavier 80mm units. The 80mm is the right call for a driveway that takes a heavy truck or a boat trailer. Standard 60mm is fine for cars. The upcharge is real but so is the load capacity.
- Permeable vs. solid pavers. Permeable systems with wider joints and an open-graded base cost more but move stormwater off the drive instead of into the yard. On Forest Hill’s clay, that matters when the ground is saturated.
- Color and finish. Tumbled, smooth, or shot-blast finishes change grip and look. A tumbled finish reads older and hides tire marks better; smooth cleans faster.
- Pattern. Herringbone interlocks best under load; running bond and basketweave trade a little structural grip for a cleaner line.
We bring samples so you’re not choosing a paver from a photo. Tamko and Boral both make hardscape lines that hold up in North Texas heat, and we’ll show you where each one fits.
What Paver Driveways Cost in Forest Hill, TX

Plan on $7,000 to $18,000 for a full paver driveway in Forest Hill. A straightforward tear-out-and-replace on a standard two-car approach lands near the low end; a larger, curved drive with a heavy 80mm paver and permeable base climbs toward the top. Here’s what moves the number:
- Square footage. At roughly $12 to $22 per square foot installed, a 400 sq ft drive and an 800 sq ft drive are very different projects.
- Base condition. If the existing concrete is thick and badly tied in, demo and haul-off add cost. If the subgrade is soft clay, we may need deeper excavation.
- Paver grade and color. Premium finishes and clay brick sit above standard concrete pavers.
- Access. A tight 1950s lot where we can’t get a skid steer to the work adds labor.
- Drainage corrections. Adding a channel drain or regrading toward the street is often necessary and always priced separately.
Every written estimate itemizes demo, base material, pavers, edge restraint, polymeric sand, and haul-off, so nothing shows up as a surprise line later. Not included on most jobs: relocating a fence, moving utilities, or landscape repair around the apron. Ask, and we’ll price it up front.
See the difference
Before
After
Before
After
Before
AfterHow Forest Hill’s Housing Stock Reshapes This Job
Forest Hill is a small, built-out inner-ring suburb of Fort Worth, and almost no ground here is new construction. That changes paver driveways in ways a fresh subdivision never sees. The typical driveway we replace belongs to a 1950s or ’60s single-story ranch on a tight plat along the 76119 corridor, often with the original slab that’s heaved and cracked from North Texas expansive clay. There’s no lot line to expand into, so the driveway is usually the same footprint it was on the day it was poured. Narrow residential streets, mature trees, and equipment staging are the real constraints before the first paver goes down. Because the ground moves, our base is deeper and more carefully compacted than the “6 inches and go” work you’ll see elsewhere. We also check drainage first, since the clay doesn’t absorb July downpours the way sandy soil does.
Serving Forest Hill, TX – Our Local Coverage Area
We serve Forest Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in Forest Hill

Most Forest Hill paver driveways take four to seven working days once we start, plus a few days of lead time to order materials. Tight lots and heavy demo can push it toward the longer end. Call (855) 912-5373 for a scheduling window on your specific driveway.
Usually no separate driveways permit is needed for a like-for-like residential replacement, but a change in the approach at the property line or a curb cut does trigger a city review. We confirm what applies to your lot before we start. Call (855) 912-5373 and we’ll walk you through it.
Yes. Paver driveways in Forest Hill typically leave the existing foundation, fence lines, and planting beds untouched, since the work stays within the drive footprint. We only recommend a disturbance if the subgrade is failing. Call (855) 912-5373 to talk through your layout.
The low end of the range runs around $7,000, achieved with standard 60mm concrete pavers, a simple running-bond pattern, and a straightforward demo. Cutting corners on the base is where cheap jobs go bad. Call (855) 912-5373 for an honest line-item estimate.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if the workmanship isn’t right, we come back and make it right. Our technicians have up to 12 years of experience on this kind of site work. Call (855) 912-5373 to schedule your free estimate.
Grab Your Free Paver Driveway Estimate
If you’re pricing paver driveways in Forest Hill and want a real number instead of a range from a phone call, we’ll come out, measure, talk through pattern and paver grade, and hand you a written line-item quote at no charge. It’s part of a full driveway & pavers plan, and homeowners often pair the work with our Door Installation in Forest Hill or Cabinets & Countertops in Forest Hill projects. Call (855) 912-5373 and a live person will answer.
Written by the team at Groundwork Construction Co. of Fort Worth. If you’re planning paver driveways in Forest Hill, our Forest Hill service covers every part of the job, so start with a free estimate. See the wider scope on our Driveway & Pavers in Forest Hill page and our broader Driveway & Pavers service hub.












