







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in North Richland Hills: What It Takes and What It Costs
Door installation in North Richland Hills typically runs $450 to $2,800 per door, depending on whether you’re setting a standard interior slab, a prehung exterior entry, or reinforcing a storm-facing door with wind-rated hardware. A single interior door is a half-day job; an exterior entry with frame prep, flashing, and inspection usually takes one to two days. It’s part of a full Windows & Doors in North Richland Hills scope when you’re reworking several openings at once. Call (855) 912-5373 to schedule a free on-site estimate.
How We Run a Door Installation Job, Stage by Stage

Every door job follows the same five-stage rhythm. The sequence is what keeps a two-day install from turning into a two-week back-and-forth.
Stage 1: Measure and specify (day 1, about 90 minutes)
We measure the rough opening, check the wall for square and plumb, and confirm swing direction and handing. You decide the door style, material, and hardware at this stage. On older brick ranches, we also probe for settling at the jamb line, because a heaving slab will throw off a prehung door if the frame isn’t corrected first.
Stage 2: Order and lead time (3 to 15 business days)
Stock interior slabs and common exterior sizes move fast. Custom entry doors in steel or fiberglass or specialty oversized openings take longer. You get the number in writing before we order, and the deposit locks the lead time.
Stage 3: Demo and frame prep (4 to 6 hours)
We pull the old door, cut out the existing frame if it’s rotted or out of square, and deal with whatever the removal exposes. On 1970s and 1980s North Richland Hills homes, that’s often a rough opening that needs a sistered stud or new sheathing before the new unit goes in.
Stage 4: Set, shim, and seal (3 to 5 hours)
The new frame gets shimmed plumb, fastened, insulated at the gaps, flashed, and sealed. On exterior doors, we set the threshold level and check the sweep, then verify the door latches and shuts without rubbing. Wind-rated hardware and impact glazing are locked down here if you’ve chosen them.
Stage 5: Trim, finish, and final walk (2 to 4 hours)
Casing and thresholds go on, hardware gets adjusted, and you walk the job with us. If it’s an exterior door and the work requires it, the inspection gets scheduled. You approve the finish before we pack up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Choose Between
The spec decisions drive cost more than labor does. Here’s the honest version of each.
- Steel vs. fiberglass vs. wood exterior: Steel is the budget entry point and holds paint well, but it dents and can rust at the bottom edge if water pools. Fiberglass is the mid-range sweet spot, resists hail and moisture, and takes a heavier finish. Wood is the top of the range, gorgeous, and needs repainting every few years in North Texas sun.
- Solid core vs. hollow core interior: Hollow core is cheaper and fine for closets. Solid core is heavier, quieter, and worth the extra cost on bedrooms and home offices.
- Prehung vs. slab: A prehung unit comes with the frame and hinge, which most installs use. A slab is cheaper but only makes sense if the existing frame is sound and square, which on aging North Richland Hills stock is less common than you’d hope.
- Wind-rated reinforcement: Impact-rated or wind-rated hardware and hinges matter for storm-facing openings. It’s the difference between a door that survives a spring storm and one that gets shoved out of its frame.
- Hardware and finish: Standard locksets to full multi-point systems, satin nickel to oil-rubbed bronze. This is where the last $150 to $400 of a job usually lands.
We draw from established suppliers, including James Hardie for trim and cladding on exterior jobs, so the trim won’t cup or rot before the door does.
What Door Installation Costs in North Richland Hills, TX

Interior door installation in North Richland Hills runs $450 to $1,100 per door. Exterior entry doors run $1,200 to $2,800 installed. A wind-rated or impact exterior door with upgraded hardware lands toward the top of that range.
Four variables push the number up or down:
- Number of openings: A five-door interior package is per-door cheaper than a single door.
- Rough-opening condition: Rotted framing, out-of-square jambs, or hidden water damage adds demolition and rebuild time.
- Door material and grade: A stock hollow-core interior vs. a custom fiberglass entry is a $1,500 swing on its own.
- Storm-facing exposure: Wind-rated hardware and impact glazing add cost but eliminate the recurring repair.
Your written estimate itemizes doors, hardware, trim, demolition, and disposal, plus permit cost if it applies. Excluded unless noted: painting beyond the frame touch-up, and structural repair if demo reveals something nobody could see going in. That’s the upfront pricing rule – the number you see is the number you pay, and if we find something genuinely hidden, we stop and talk before touching it.
See the difference
Before
After
Before
After
Before
AfterWhat North Richland Hills Housing Stock Does to a Door Job
North Richland Hills is a built-out, largely post-1970s bedroom suburb of Fort Worth, so door work here is almost never new construction. It’s tear-out-and-replace on first-generation brick tract homes in ZIP codes 76180 and 76182. The expansive clay under these neighborhoods heaves and settles seasonally, and that movement racks door frames out of square – which is why a door that “just needs new hinges” often turns out to need the rough opening shimmed and squared first.
Along the SH 26/121 corridor and the older Smithfield-area core in 76180, we see older mid-century homes where the doors have been through three decades of settling. On the exterior side, North Texas hail and spring storm seasons punish storm-facing doors, and the mature post oak and pecan canopy means limbs come down and batter anything in their path. Homeowners here often pair door work with Cabinets & Countertops in North Richland Hills when they’re remodeling adjacent rooms, and with a Garage Conversion ADU in North Richland Hills when an exterior door needs to become an interior one. We cover the full North Richland Hills service area, plus nearby Watauga, Hurst, Richland Hills, and Bedford. Our Windows & Doors service handles the wider scope; this page stays focused on doors.
Serving North Richland Hills, TX – Our Local Coverage Area
We serve North Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in North Richland Hills

A single interior door is a half-day job. A standard exterior entry door takes one to two days, and a multi-door package typically runs three to five days depending on ordering lead time. Call (855) 912-5373 for a free estimate and to lock in your schedule.
A like-for-like replacement in the same opening usually doesn’t require a permit, but new openings, structural changes, or exterior doors affected by wind-load or egress rules may. The city’s inspection expectations on exterior openings are tighter than on interior swaps. We tell you upfront whether your job needs one and pull it for you. Call (855) 912-5373 with your address and we’ll confirm.
Usually yes, if the new door sets into the same opening and the rough framing is sound. Large openings, pocket doors, or moving a door to a different wall is where framing and sometimes electrical or plumbing relocation come in, and the price reflects that. We flag it at the measure visit, not mid-demolition. Call (855) 912-5373 to schedule a free on-site look.
Interior doors run $450 to $1,100 installed, and exterior entry doors run $1,200 to $2,800. Wind-rated or impact-rated upgrades push toward the high end. Call (855) 912-5373 for an exact quote – estimates are free.
Every door we install is backed by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship, not wear or storm damage. Our technicians have up to 12 years of experience. Call (855) 912-5373 to schedule your free estimate.
Get a Free Door Installation Estimate in North Richland Hills
Call (855) 912-5373 to schedule a free on-site estimate for door installation in North Richland Hills. A live person answers around the clock, and on the call we’ll ask about the openings, confirm whether a permit applies, and set a time for the measure visit. You get a written line-item quote with upfront pricing, plus details on 0% financing for 18 months and $1,000 off projects over $10,000. No pressure, no surprises.
Written by the team at Groundwork Construction Co.












