







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in North Richland Hills, TX: What It Costs and How Long It Takes
A chain link fence in North Richland Hills typically runs $3,500 – $9,000, with most standard residential yards landing in the $4,000 – $6,500 range, and a straightforward job is usually finished in three to four working days. Smaller runs with a single walk gate can come in under $3,500. The number moves with linear feet, height, gauge, and how much tear-out and grading the yard needs. Call (855) 912-5373 for a free on-site estimate.
How a Chain Link Fence Goes In, Stage by Stage

Most crews quote this job in five stages. Here’s what actually happens, what you decide at each point, and how long it takes.
- Site walk and layout (hour 1). We confirm the property line, note existing fencing, gates, and any obstructions (tree roots, utility runs, AC pads, septic lines). You approve the line and gate placement before anyone digs. On a sloped yard we agree on stepped versus racked panels here, because that decision is expensive to change later.
- Tear-out and prep (day 1). Old fence comes down, posts get pulled or cut at grade, and debris goes to disposal. If the ground needs grading to a consistent line, that happens now. This is also when we call in utility locates, which usually takes two to three business days ahead of the dig on your schedule, so we schedule the walk accordingly.
- Post setting (day 1 – 2). Holes go down 24 to 36 inches depending on soil and height, posts are set in concrete, and the line is braced. Concrete needs roughly 24 hours to cure before tension goes on. Nothing you need to decide here except any last-minute gate swing direction.
- Framework and mesh (day 3). Top rail, tension bands, and mesh get stretched. Gate frames and hardware go on. You walk the finished line with us and flag anything that needs adjustment before we leave.
- Final tension and cleanup (day 3 – 4). We recheck post straightness, gate alignment, and tension, sweep for cut wire and concrete splashes, and leave you with care notes. Most single-yard jobs wrap on day three; larger lots with multiple gates push to day four.
Timelines hold if the ground is workable and the layout is decided early. Long runs with heavy root systems or hard, compacted coral clay can add a day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Choosing Your Chain Link Fence Specs
Chain link is not one product. These are the choices that matter, with the honest trade-offs.
- Gauge and coating. Eleven-and-a-half gauge is the residential standard. Nine gauge is noticeably heavier and costs more per foot but resists sagging and impact better, which suits a gate-heavy fence or a yard with dogs. Galvanized lasts in dry North Texas; vinyl-coated (usually black or green) adds a decade or so of service and looks softer against brick.
- Height. Four feet is common for a boundary or garden line; five feet is the usual dog fence; six feet gets you privacy depth and HOA review in most subdivisions. Verify the height limit before you order, since oversized runs along the front of a lot are commonly restricted.
- Top rail and framework. A full top rail with a tension wire rusts slower and holds tension better. Cheaper jobs skip the rail, and the line sags over a few summers. Ask what’s included.
- Gates and hardware. Single walk gates run $150 – $400 installed. Drive gates and double gates cost considerably more and need sturdier posts. Heavy-duty hinges and a self-closing latch cost little more and last far longer.
- Terminations. Corner, end, and gate posts carry the tension. Underbuilt posts are the most common cause of a chain link fence that leans after five years. We set all of them in concrete regardless of fence height.
For a boundary that needs a wood or metal face rather than wire, the wider material list lives on our Fence Installation service page.
Chain Link Fence Prices in North Richland Hills, TX

Most North Richland Hills jobs land between $3,500 and $9,000. A small backyard run with one gate typically comes in near $3,500; a full perimeter with two gates on a larger lot runs closer to the top of the range.
| Line item | Typical range |
|---|---|
| Standard chain link (4 ft or 5 ft, 11.5 gauge) | $3,500 – $6,500 |
| Heavier 9-gauge or vinyl-coated upgrade | $4,500 – $8,000 |
| 6-foot privacy height | $5,000 – $9,000 |
| Single walk gate | $150 – $400 each |
| Double or drive gate | $900 – $2,500 |
| Old fence tear-out and disposal | $250 – $700 |
| Grading to a level line | $300 – $900 |
What pushes a job to the high end: long linear footage, six-foot height, multiple gates, hard compacted clay or root-heavy ground requiring more hand-digging, and old fencing that has to come out. Low-end jobs are short runs on flat, clear ground with one gate. A written estimate itemizes posts, mesh gauge, height, gate count, tear-out, and any grading; confirm what’s excluded (landscaping restoration, tree trimming, utility relocation if a line sits in the dig path).
See the difference
Before
After
Before
After
Before
AfterWhat North Richland Hills Conditions Do to a Chain Link Fence
North Richland Hills is a built-out suburb, and that shapes this job more than most people expect. Almost every fence we replace in 76180 and 76182 comes off a first-generation 1970s to 1990s brick ranch or traditional two-story, where the original chain link has been in the ground for 30 to 50 years. Pulling those posts often reveals the real problem: the expansive Blackland-to-Cross-Timbers clay has heaved and shifted the ground, and half the posts have rusted through at the soil line. The mature post oak and pecan canopy across the older neighborhoods makes it worse, pushing root systems straight through the fence line and trapping moisture against the mesh. Along the SH 26 and 121 corridor, redevelopment and infill bring a different request: newer townhomes and patio homes needing a boundary or dog run built tight against existing hardscape. Before digging, check the city’s permit requirement for your fence height and lot position, and confirm any HOA setback along the side yard. If your project expands into a broader yard rebuild, this work pairs naturally with a full Fence Installation in North Richland Hills plan, and for a yard where the ground was already torn up for utilities, homeowners often pair this with ADU Site Prep & Utilities in North Richland Hills so digging happens once.
Serving North Richland Hills, TX – Our Local Coverage Area
We serve North Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions

A typical residential job takes three to four working days from teardown to final tension, with one day of that allowed for concrete cure time. Small single-yard runs often finish in three. Schedule the walk two to three days ahead so utility locates land before we dig. Call (855) 912-5373 for a firm timeline on your yard.
Many residential fence installs here don’t require a permit, but height, corner-lot sight triangles, and front-yard placement can trigger one, and HOAs usually have their own review. We confirm the requirement for your specific address before the work is scheduled. Call (855) 912-5373 to talk through your lot.
Not if the posts are placed correctly. We locate utility runs before digging and adjust the line to clear sprinkler zones, septic fields, and the edge of a slab foundation. Post holes are set at grade, well away from the concrete edge. Call (855) 912-5373 to walk your line.
Most jobs land between $3,500 and $9,000, with a standard residential yard usually in the $4,000 – $6,500 range. Height, gauge, gate count, tear-out, and grading move the number. Call (855) 912-5373 for an exact quote – estimates are free.
Workmanship on your chain link fence is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers installation quality like post setting and tension. Material warranties come from the manufacturer. Call (855) 912-5373 with questions.
Get a Free Chain Link Fence Estimate in North Richland Hills
Call (855) 912-5373 to schedule a free on-site estimate for a chain link fence in North Richland Hills. We’ll walk the line with you, measure, check utility locates, confirm permit and HOA requirements for your address, and give you a written itemized quote with no surprises. A live person answers around the clock. We also cover the surrounding North Richland Hills area including Watauga, Hurst, Richland Hills, and Bedford, and if your project grows into doors or a workshop build-out, we handle Door Installation in North Richland Hills too. Background-checked, uniformed technicians arrive on every job.
Written by the team at Groundwork Construction Co.












