







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in North Richland Hills: What the Job Actually Involves
Paver driveways in North Richland Hills typically cost $7,000 to $18,000 for a two-car drive, and a standard tear-out-and-replace runs three to five working days once materials are on site. The work is excavation of the old slab or gravel base, a compacted flexible base, edge restraint, and hand-set pavers over a bedding layer. If your current drive is a cracked 1980s concrete slab in 76180, that demolition and haul-off is usually one full day by itself. Call (855) 912-5373 for a free on-site estimate.
The Five Stages of a Paver Driveway Build, Start to Finish

Every driveway we build follows the same order. Here’s what happens on each day so you know what to expect and when your decisions are needed.
Stage 1: Layout, marking, and saw-cutting (half a day)
We mark the new driveway footprint, confirm slope away from the garage, and saw-cut the existing slab or asphalt at the transition points. You decide the paver pattern and border layout before we cut anything, because changing the running bond after the base goes in means starting over. This is also when we confirm the driveway approach apron detail so the slope at the street matches what the city expects.
Stage 2: Demolition and haul-off (one day)
The old slab, gravel, or asphalt comes out, along with any failed base material underneath. On a typical North Richland Hills ranch home, that means roughly 8 to 12 cubic yards of debris leaving the site. We protect the lawn edge and the garage door track during demo, since dropping a slab chunk on a door track is a fast way to add a repair to the punch list.
Stage 3: Excavation, subgrade, and base (one to two days)
We excavate to depth, proof-roll the subgrade, and bring in a compacted crushed stone base in lifts. Each lift gets plate-compacted before the next goes down. Base depth depends on what we find: a stable, well-drained subgrade needs less; soft clay with poor drainage needs more. This is where most of the long-term performance of a paver driveway is decided.
Stage 4: Edge restraint and paver setting (one to two days)
We set the edge restraint, screed the bedding sand, and lay the pavers. On a 20-by-20-foot drive, that’s around 3,600 square feet of pavers laid by hand. You choose the color mix, the border, and whether you want a soldier course at the apron before we open the first pallet.
Stage 5: Compaction, joint sand, and cleanup (half a day)
We compact the finished field, sweep polymeric joint sand into the joints, and clean up. We walk the finished driveway with you and point out the drainage pattern so you know where water is supposed to go.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Paver driveways are not one product. Here are the real choices, with what each costs and how it holds up in North Texas conditions.
- Concrete pavers (interlocking): The standard choice, and the most common on North Richland Hills driveways. Clay-fired or concrete, 60mm or 80mm thick. The 80mm profile is the better call for a driveway that takes a heavy truck or a boat trailer. Expect $7,000 to $18,000 for a typical two-car drive, depending on square footage and pattern.
- Clay brick pavers: Higher cost, usually $11,000 to $18,000-plus for the same footprint. The color holds better than concrete over 20 years, and the clay body resists the freeze-thaw swings that hit northeast Tarrant County in January and February. It’s the right choice if you want a traditional look and plan to stay put for decades.
- Permeable pavers: Open-graded base with wider joints, so water drains through the surface instead of running off. Useful on a lot where the drive slopes toward a low corner and standing water is a recurring problem. Costs 10 to 20 percent more than standard pavers.
- Paver grade and thickness: A 60mm paver is fine for a residential drive with normal traffic. An 80mm paver costs a bit more per square foot but resists the point-load cracking that shows up where a heavy vehicle parks in the same spot year after year.
- Border and pattern: A running bond is the fastest to lay and the least expensive. A herringbone or basketweave pattern with a contrasting border adds labor and cost, often $1 to $3 per square foot.
What Paver Driveways Cost in North Richland Hills, TX

Paver driveway installation in North Richland Hills runs $7,000 to $18,000 for a standard two-car drive. That range covers full tear-out, base, pavers, edge restraint, and joint sand. Five variables push a job toward the top or bottom of that range.
- Square footage: A single-car drive sits near $7,000. A three-car or RV-width drive pushes past $18,000.
- Existing surface: Removing a thick 1970s concrete slab costs more than pulling up gravel or asphalt. Slab demolition and haul-off can add $1,500 to $3,000.
- Base conditions: Soft, poorly drained clay that needs extra excavation and imported base runs the number up. This is common on older lots in 76180 where drainage was never corrected.
- Paver grade and pattern: 80mm pavers, a herringbone pattern, and a contrasting border all add cost per square foot.
- Drainage corrections: If the drive slopes toward the house or the street, adding a channel drain or regrading the apron adds cost. Getting water moving away from the foundation matters on this clay.
A written estimate from us includes tear-out, haul-off, base, compaction, pavers, edge restraint, polymeric joint sand, and cleanup. It does not include landscape repair beyond the drive edge, driveway gate automation, or any foundation work the driveway slope exposes. If we find unexpected subgrade problems after demo, we stop, show you what we found, and quote the fix before doing it. The number you see is the number you pay. Estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat North Richland Hills Homes Specifically Do to This Job
North Richland Hills is a built-out, largely post-1970s bedroom suburb of Fort Worth, and that shape drives the work directly. There’s almost no vacant land here, so paver driveway jobs are almost always tear-out-and-replace on first-generation suburban homes, not new construction. The housing stock runs heavily to 1970s through 1990s single-family brick ranch and traditional two-story plans, with older mid-century smaller homes near the original 76180 core and newer patio-home and townhome infill. Those aging slabs are where the failure modes show up: cracks at the apron, settling near the garage door, and standing water at the low corner because the original grade was never corrected.
The clay-heavy Blackland-to-Cross-Timbers soil under northeast Tarrant County moves with the wet-dry cycle. On an older 76180 lot with mature post oak and pecan canopy, the slab heaves and shifts, and the driveway takes the brunt of it at the garage apron and the street transition. That’s why a paver driveway on a North Richland Hills lot is as much a drainage correction as a paving job. We plan for the soil, not against it. For the wider project scope, this is part of a full Driveway & Pavers in North Richland Hills project, and homeowners often pair the driveway with a new approach apron at the same time. If your garage door has been battered by the same clay movement and seasonal storms, Door Installation in North Richland Hills is a natural pairing while the concrete is open and the truck is on site. We also cover the surrounding neighborhoods across North Richland Hills, and our Driveway & Pavers service covers the full range of hardscape work.
Permit reality: residential driveway replacement in North Richland Hills generally requires a permit if you’re changing the approach apron or the curb cut at the street, and the city inspects the apron slope and the transition. HOA rules also come into play on a lot of these subdivisions, and some restrict the paver color or the border style. We pull the permit and coordinate the inspection. Our technicians have up to 12 years of experience with these local conditions, and we’re backed by the 730-Day Done Right Promise on the workmanship.
Serving North Richland Hills, TX – Our Local Coverage Area
We serve North Richland Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Paver Driveways in North Richland Hills

A standard two-car paver driveway takes three to five working days from demolition to final joint sand, weather permitting. Demolition is one day, base prep is one to two days, and setting and finishing is the rest. Rain days add to the schedule because the base has to be dry before pavers go down. Call (855) 912-5373 to schedule your free estimate and get a firm timeline.
You usually need a permit when the work touches the approach apron or the curb cut at the street, and the city inspects that transition. A driveway replacement entirely on private property without apron changes is often permit-free, but we confirm before we start. We pull the permit and pass the inspection as part of the job. Call (855) 912-5373 for an exact answer on your address.
Yes, if the base is built correctly. The clay under most North Richland Hills lots moves with the wet-dry cycle, so the base depth and drainage plan matter more than the paver itself. We excavate to stable subgrade, compact the crushed stone in lifts, and slope the finished drive away from the garage. Done that way, a paver driveway flexes with minor movement that would crack a concrete slab. Call (855) 912-5373 for an on-site evaluation.
Most two-car paver driveways in North Richland Hills land between $7,000 and $18,000, including tear-out, base, pavers, and cleanup. A single-car drive is closer to $7,000; a three-car or RV-width drive pushes past $18,000. Slab demolition, soft subgrade, and premium pavers are the biggest cost drivers. Call (855) 912-5373 for an exact quote. Estimates are free.
Every paver driveway we build is covered by our 730-Day Done Right Promise. If something we installed isn’t right, we come back and make it right, for two full years. That covers workmanship, not damage from a vehicle or a tree root. The material warranty comes from the paver manufacturer and varies by product. Call (855) 912-5373 to talk through it.
Get a Free Paver Driveway Estimate in North Richland Hills
If your North Richland Hills driveway is cracked, settling, or draining toward the garage, the fix starts with a free on-site estimate. We’ll walk the driveway with you, measure the square footage, check the apron and drainage, and hand you a written line-item quote with the permit and timeline included. The number you see is the number you pay, and 0% financing for 18 months is available. Call (855) 912-5373. A live person answers.
Written by the team at Groundwork Construction Co.












