







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt driveways and resurfacing in Benbrook, TX
Asphalt Driveways & Resurfacing in Benbrook, TX typically costs $3,500 – $9,000 for a new asphalt drive and $250 – $700 for a seal coat refresh, with most full drives finished in 2 – 4 working days plus a curing window. The work covers grading, base prep, hot-mix asphalt laid and compacted, and edge finishing. Benbrook’s clay soils and summer heat make base prep the part that decides whether the drive lasts. Call (855) 912-5373 for a free on-site estimate.
How we build an asphalt drive here, stage by stage

Every asphalt drive runs the same sequence, and the honest timeline is what separates a drive that holds for 20 years from one that cracks in three summers.
Day 1: layout, demo, and grading
We walk the finished grade with you first, because slope and drainage decide the whole job. Existing concrete, old asphalt, or gravel gets broken out and hauled off, usually 4 – 8 hours for a typical two-car drive. Then we cut and shape the subgrade. On Benbrook’s expansive clay, that means over-excavating the top 6 – 8 inches and building back with a compacted base rather than laying hot-mix over native soil. You decide the driveway width and turn radius at this stage, and whether you want a widened apron at the street.
Day 1 – 2: base course and compaction
Crushed limestone base goes down in lifts and gets compacted in passes, not dumped and smoothed once. This is the stage that gets skipped on cheap drives and causes the alligator cracking you see on older lots. You don’t have to decide anything here, but this is the day to ask how many compaction passes we’re running.
Day 2 – 3: hot-mix asphalt placement
Two inches of compacted hot-mix for a residential drive is standard; 2.5 – 3 inches on heavier or wider drives. We lay it hot, screed it to grade, and roll it while it’s still workable. You pick the finish at this point: standard dense-graded asphalt or a coarser mix with more visible aggregate.
Day 3 – 4: edges, transitions, and cleanup
Edges get squared and compacted, transitions at the garage apron and street get feathered, and the site gets swept. This is when you decide whether to add a widened parking pad or a decorative border.
Week 2 onward: curing and sealing schedule
New asphalt cures for 6 – 12 months before its first seal coat. After that, reseal every 2 – 3 years to keep the surface from oxidizing in North Central Texas sun. We give you the seal date in writing so it doesn’t get forgotten.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
- Hot-mix asphalt vs. resurfacing an existing drive: A full new drive runs the higher end of the range but resets the clock. Resurfacing over sound asphalt saves money and time, but only works if the base is intact and there’s no structural cracking. If the existing base is failing, resurfacing just hides the problem for a season.
- Base depth: 4 inches of compacted base is the minimum for light residential use; 6 – 8 inches is worth the extra money on Benbrook clay and on any drive that takes a heavy truck or RV.
- Asphalt thickness: 2 inches compacted is the residential standard. Going to 2.5 – 3 inches adds cost but pays back on wider drives and hot summer parking.
- Edge treatment: Asphalt alone can ravel at the edges. A Quikrete-set concrete curb or a border of Cambridge Pavers holds the edge and looks intentional.
- Drainage: Crowned drive with side swales, a channel drain at the garage, or a french drain along the low side. On lots near the lake, this is not optional.
- Seal coat: A Sakrete or Oldcastle-based sealant applied every 2 – 3 years protects against UV and oil. Skipping it is the single fastest way to age a drive in Texas.
What Asphalt Driveways & Resurfacing costs in Benbrook, TX

Expect $3,500 – $9,000 for a new asphalt drive in Benbrook and $250 – $700 for a seal coat. Resurfacing an existing sound drive lands in the middle of the range. What pushes a job toward the top:
- Size and access: A standard two-car drive sits at the low end. Long rural-edge drives toward the county line, or drives with tight side-yard access that requires small equipment, run higher.
- Existing condition: Breaking out old concrete or failed asphalt adds demo and haul-off cost. A drive with root heave or settled sections needs base repair before paving.
- Base work: Over-excavating Benbrook’s clay and importing compacted base is the biggest cost lever. Skipping it saves today and costs later.
- Drainage scope: A channel drain, french drain, or regrading toward a swale adds to the job but prevents water at the slab, which matters on lots near Lake Benbrook.
- Finish and edging: Decorative borders, concrete curbs, and widened aprons are add-ons you can price in or out before work starts.
Our written estimate itemizes demo, base, asphalt, edging, and drainage line by line. What typically isn’t included: landscape repair beyond the drive footprint, sprinkler relocation, and utility relocation if a line sits under the drive. Upfront pricing means the number you see is the number you pay, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months. When the drive is part of a full Driveway & Pavers in Benbrook scope, we price both together so nothing doubles up.
See the difference
Before
After
Before
After
Before
AfterWhat Benbrook homes specifically do to this job
Benbrook sits on the southwest edge of Fort Worth along the Lake Benbrook and Trinity River corridor, and that geography shows up in every drive we pour or pave here. The town’s permitting posture is small-town and hands-on: Benbrook runs its own permit office and inspector expectations, so a contractor who knows the local process has a real edge over a Fort Worth crew that treats Benbrook as just another suburb. Much of the work here is infill and rebuild on scattered lots near the lake and the older core, not single-tract subdivision builds, which means individual drive grades and drainage get scrutinized harder. Mid-century ranch homes near the original town core often have drives laid over native clay with no base at all; 1970s – 2000s tract homes toward the county line tend to have settled aprons and root heave. And because the Trinity corridor floods periodically, drainage on lots near the water gets real attention, not a token swale. If you’re pairing the drive with other exterior work, homeowners often add a Chain Link Fence in Benbrook at the same time so the equipment only comes out once.
Serving Benbrook, TX – Our Local Coverage Area
We serve Benbrook and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Asphalt Driveways & Resurfacing in Benbrook

A standard drive takes 2 – 4 working days, with new asphalt ready for foot traffic in 24 – 48 hours and vehicles after about 3 days. Curing continues for 6 – 12 months, which is why the first seal coat waits until then. Call (855) 912-5373 for a schedule based on your drive.
Benbrook requires a permit when the work touches the right-of-way, changes drainage, or adds impervious surface beyond local limits. A like-for-like replacement in the same footprint usually doesn’t. We pull what’s required and handle the inspection, so you’re not chasing the permit office.
Yes, if the base is sound and the cracking is surface-level rather than structural. Resurfacing saves roughly 30 – 50% versus a full rebuild. A failed base can’t be fixed by resurfacing, and we’ll tell you straight if that’s what you have.
Our written quote itemizes demo, base prep, asphalt, edging, and drainage. Landscape repair beyond the drive footprint, sprinkler relocation, and utility relocation aren’t included unless we price them in. Every drive is covered by our 730-Day Done Right Promise.
Yes, significantly. Expansive blackland clay shrinks and swells with moisture, so a drive laid over native soil will crack as the ground moves. Proper base depth and compaction are the fix, and on lots near Lake Benbrook, drainage design matters just as much.
Get a free asphalt driveway estimate in Benbrook
We’ll come out, walk the grade, and give you an itemized written estimate for Asphalt Driveways & Resurfacing in Benbrook with no pressure and no surprises. Call (855) 912-5373 and a live person answers around the clock. We serve Benbrook and the surrounding area, and our Driveway & Pavers team handles the wider scope when the project grows. Homeowners pairing the drive with an ADU Site Prep & Utilities in Benbrook project often price both in one visit.
Written by the team at Groundwork Construction Co.












