







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in Fort Worth, TX: What the Job Actually Takes
A standard interior door installation in Fort Worth runs $350 to $900 per opening, and an exterior entry door with frame repair lands between $1,200 and $3,500. Most single-door jobs finish in one day; a whole-house package of six to ten doors takes three to five working days. Call (855) 912-5373 for a free on-site estimate before you buy a single slab.
How our Door Installation process runs, stage by stage

Door work rewards planning and punishes improvisation. Here’s the honest sequence, including where you’ll be asked to make a decision.
Stage 1: Measure and site check (day 1, 60 – 90 minutes)
We measure every rough opening, check the framing for plumb and square, and note how the existing wall sits against the floor. In older Fort Worth homes where walls have settled a half inch over the decades, this is where we find out whether we’re hanging a door or correcting a frame. You decide the swing direction and whether hinges go left or right at this visit.
Stage 2: Product selection and ordering (day 1 to 3, depending on stock)
We walk you through slab versus prehung, material, and finish, then order. Stock hollow-core interior doors can be ready within days. A custom carriage-house style exterior door with a specified stain and hardware package may take three to six weeks to arrive. You’ll approve the exact stain or paint color and the hardware finish here, in writing, so nothing gets guessed at the end.
Stage 3: Demo and prep (day of install, 1 – 3 hours per opening)
Old doors come out, jambs get checked and squared, and any rot or soft framing behind the trim is cut back and replaced. On exterior doors we inspect the threshold and sill pan area, which is where water finds its way in after a North Texas driving rain. Hidden damage discovered here is quoted before we proceed, never billed after.
Stage 4: Hanging and hardware (same day, 2 – 4 hours per door)
Prehung units get shimmed, leveled, and secured at the hinge side first, then the latch side. We set the strike plate so the door latches with a light push, not a slam. Hardware, weatherstripping, thresholds, and door sweeps go on last so nothing gets scratched during fitting.
Stage 5: Trim, finish, and walkthrough (day of install plus 1 day for paint)
Casing and trim go back on, nail holes get filled, and we prime and paint or stain to match. You and a lead technician walk every opening together, open and close each door, and sign off. Anything that doesn’t swing clean comes back off the list before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Door selection drives both the price and how the finished job feels day to day. Here’s what actually matters.
- Slab versus prehung. A slab is the door only and costs less but requires reusing the existing frame; prehung arrives in its frame and is the better call when jambs are out of square. Most Fort Worth installs we do are prehung.
- Hollow-core versus solid-core interior. Hollow-core runs cheaper and lighter, fine for closets and low-traffic rooms. Solid-core costs more but quiets a house noticeably and holds up to kids and pets. Worth it for bedrooms and home offices.
- Exterior material. Fiberglass holds paint well and shrugs off heat and humidity; steel is strong and secure but dents; wood looks best on historic homes but needs recoating every few years in our sun. We often source exterior units from CGI or PGT for their weather performance.
- Style and finish. Two-panel shaker reads clean and modern; raised-panel suits a Craftsman or bungalow. Stained finishes show grain and hide scuffs better; painted finishes are easier to touch up in a single color.
- Openers and integration (garage). For garage doors we spec belt-drive openers when quiet matters and Wi-Fi-connected units when you want the door on your phone. Tamko and Boral components hold up well in Texas heat cycles.
What Door Installation costs in Fort Worth, TX

Interior door installation runs $350 – $900 per opening. Exterior entry doors land at $1,200 – $3,500 installed, and a custom carriage-house or oversized wood door with finish work can reach $5,000 and up. Five variables push a job toward the low or high end.
- Door count and repetition. One door carries a minimum trip charge; six or more spreads labor thinner per opening.
- Frame condition. Squared, sound framing keeps it simple. Rotted sills, settled jambs, or a wall that’s out of plumb add carpentry hours.
- Material and finish grade. Hollow-core versus solid-core, steel versus fiberglass versus wood, painted versus stained.
- Hardware. Basic knobs versus a full matching package with deadbolts, handlesets, and hinges in a premium finish.
- Permit scope. A straight like-for-like swap usually needs no permit. Adding an opening, changing a header, or working in a historic overlay does.
Your written estimate lists doors, hardware, trim, labor, and disposal line by line. What it doesn’t include, unless we call it out: hidden rot behind trim, lead-safe abatement in pre-1978 homes, and painting beyond a basic finish coat. Upfront pricing, no surprises – the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fort Worth homes specifically do to this job
Fort Worth builds at two speeds, and door work feels it. In Fairmount and Ryan Place you’re in early-1900s Craftsman and bungalow blocks with pier-and-beam foundations and true-dimension lumber, where a “simple” door swap turns into a frame correction because 100 years of foundation movement has racked the opening. Three miles away past Loop 820, toward Alliance and Walsh Ranch, we’re hanging doors in slab-on-grade new construction where the framing is square and the door arrives factory-perfect. Then there’s the historic overlay: the design-review districts covering Fairmount, Ryan Place, and the Stockyards area mean an exterior door facing the street can stall in district review before a permit is issued, so we build review time into the schedule rather than pretending it isn’t there. Expansive black clay is the other constant. Soil-moisture movement in a long dry summer cracks trim and throws doors out of alignment, and we see it most in east-side mid-century brick ranches. We cover all of Fort Worth, including the neighborhoods off Haltom City, Forest Hill, Saginaw, and Richland Hills, and we pull the permits and pass the inspections.
Serving Fort Worth, TX – Our Local Coverage Area
We serve Fort Worth and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Door Installation in Fort Worth

Most single door installations finish in one day, and a whole-house package of six to ten doors takes three to five working days. Custom exterior doors add lead time before install day, not after. Call (855) 912-5373 to get a realistic date on the calendar.
A like-for-like door replacement usually needs no permit; adding an opening, changing a header, or working in a historic overlay does. We handle the permit and inspection when one is required. Call us and we’ll tell you which side of the line your job falls on.
Yes, a straight replacement reuses the existing opening and touches neither. Moving a door to a new wall means framing changes and possibly electrical relocation, which shifts the scope and price. We’ll flag that in the estimate before any work starts.
Interior doors run $350 – $900 per opening and exterior entry doors $1,200 – $3,500 installed, with custom work reaching $5,000 and up. Door count, frame condition, material, hardware, and permit scope move the number. Call (855) 912-5373 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That covers workmanship for two years, one of the longest guarantees in residential construction. Manufacturers cover the door and hardware themselves.
Get a free door installation estimate in Fort Worth
If you’re planning door work in Fort Worth, start with a free on-site estimate. We measure, talk through material and finish options, and hand you a written line-item price before you commit to anything. Calls are answered by a live person around the clock, technicians are background-checked and arrive in uniform, and projects over $10,000 get $1,000 off with 0% financing for 18 months available. Call (855) 912-5373 today. Most door jobs we quote are part of a wider scope too – if yours is, our Windows & Doors in Fort Worth page covers the full picture, and homeowners often pair this with Cabinets & Countertops in Fort Worth or a Garage Conversion ADU in Fort Worth.
Written by the team at Groundwork Construction Co. of Fort Worth. Our technicians have up to 12 years of experience, and we serve homeowners across Fort Worth for Windows & Doors work from foundation to finish line.












