







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterIron Fence in Fort Worth, TX
Iron fence installation in Fort Worth typically runs $3,200 to $9,500 for a standard residential yard, with wrought iron at the higher end and aluminum or steel ornamental at the lower end. Most of our Fort Worth iron fence jobs are finished in two to four days once the material arrives, and the fence is built to hold its finish through Texas heat, hail, and the clay soil movement that pushes posts out of plumb. We build these fences with the same written guarantee behind them as every other project: the 730-Day Done Right Promise. If it’s not done right, we make it right.
Iron fencing is a different animal from a wood privacy fence. It’s set in concrete footings, welded or mechanically fastened at panel joints, and finished with a coating that has to survive 100-degree summers and spring hail without chalking or rusting through at the weld points. That’s why we treat it as a specialty install rather than a variation of a standard fence job. You can see how it fits into our broader work on the Fence Installation in Fort Worth page, and if you’d rather talk it through, call (855) 912-5373 and a live person will pick up, day or night.
We install iron fencing across Fort Worth, from the older lots near Ryan Place and Mistletoe Heights where property lines are tight and survey stakes matter, to newer builds out in Alliance and far north Fort Worth where HOA rules govern fence height and style. Whether you’re fencing a pool, defining a front yard in a historic district, or adding a driveway gate to a corner lot, we build it to last and we back it in writing.
Key Takeaways
- Iron fence in Fort Worth costs roughly $3,200 to $9,500 for a typical residential yard; pool-code and custom gate work runs higher.
- Wrought iron and aluminum ornamental both work in North Texas, but aluminum holds powder coat better in full sun and iron handles heavy impact better.
- Fort Worth clay soil is the single biggest factor in whether an iron fence stays plumb; footing depth and concrete mix matter more than the fence style.
- We answer the phone 24/7 with a live person and offer upfront pricing, so the number you see is the number you pay.
- Every iron fence we install is covered by the 730-Day Done Right Promise.

When You Need Iron Fence
Most homeowners don’t wake up one morning wanting an iron fence. They arrive at it because of a specific situation on their property. Here are the ones we see most often in Fort Worth.
- Your wood fence is failing at the posts. This is the classic Fort Worth problem. Our clay soil swells when it’s wet and shrinks when it dries, and a wood post set in a shallow footing will work itself loose within a few seasons. Homeowners in Wedgwood and Westcliff deal with this constantly. Iron posts set into a deep concrete footing hold their line far longer, which is often why people make the switch.
- You have a pool and need to meet code. Fort Worth requires a barrier around residential pools that meets specific height and self-latching gate standards for a reason. Iron fencing with a self-closing, self-latching gate is the most common way to satisfy that, and it looks a lot better than a chain-link pool fence. We build to the current code and can walk the yard with you before anything is ordered.
- You want curb appeal that a wood fence can’t give you. A wrought iron or ornamental aluminum fence along the front of a home in Ryan Place or Mistletoe Heights changes how the whole property reads from the street. It defines the yard without walling it off. If you’re also updating the home’s exterior, this pairs well with our home remodeling work.
- Your HOA requires a specific fence style. Many of the newer developments in far north Fort Worth and Alliance have architectural review rules that prohibit wood front fences or specify black metal. We read the HOA guidelines before we order material so you’re not fighting the ARC after the fence is already up.
- You need a driveway gate or a security fence. Corner lots and large properties often need a gate that functions as a real barrier, not just decoration. Iron gives you the rigidity for a swinging or sliding gate that lighter materials can’t match.
- Your existing iron fence is rusted, leaning, or missing sections. Older iron fences in established Fort Worth neighborhoods are often worth repairing rather than replacing. We assess rust-through, footing condition, and weld integrity and tell you straight whether a repair makes sense or whether you’re throwing money at a fence that’s past saving.
Our Iron Fence Process
An iron fence is only as good as the steps you can’t see once it’s finished: the footings, the finish, and the alignment. Here’s how we run a Fort Worth iron fence job from first call to final walkthrough.
- On-site assessment and measurements. We walk the property line with you, confirm where the fence needs to run, and check for anything that affects layout: utility locates, existing concrete, slope, and the condition of any gate posts you want to reuse. If you’re in a neighborhood with a survey on file, we work to that.
- Upfront pricing and material selection. You get a written, no-hassle price before anything is ordered. The number you see is the number you pay. We’ll talk through wrought iron versus ornamental aluminum, the finish options, and the gate hardware, and we help you pick based on what the fence actually has to do. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available if you want to spread the cost.
- Hole digging and footing work. This is where most iron fences fail, and it’s where we spend the most attention in Fort Worth. We dig footings well below the frost line and below the active clay layer, set posts plumb, and pour concrete that cures properly before any weight goes on the fence. Shallow footings in our soil are why so many fences go crooked within two or three years.
- Panel setting, welding, and gate mounting. We set panels to a consistent line and grade, weld or fasten joints per the material, and mount gates on heavy-duty hinges with self-closing and self-latching hardware where code or safety requires it. Every gate gets a swing test before we call it done.
- Finish and touch-up. Any field cuts or weld points get treated and finished so they don’t become the first spot to rust. We clean up the site and haul off all debris the same day.
- Final walkthrough. We walk the whole fence with you, check every gate, and confirm the finish before we leave. If anything isn’t right, it’s covered under the 730-Day Done Right Promise, and if it’s not done right, we make it right.
Our technicians have up to 12 years of experience on fence and exterior work, and every crew is background-checked and arrives in uniform. A note on safety, because iron work touches real hazards: we handle the deep footing digs, welding, and gate tension ourselves, and we never recommend that a homeowner try to dig footings near buried utilities or work a torch on a gate hinge. Those are jobs for a trained crew with the right equipment and a utility locate.

Iron Fence Pricing in Fort Worth
Iron fencing costs more than wood or chain-link because of the material and because of the footing work an iron fence demands. Here’s a straight look at what Fort Worth homeowners should expect. These are ranges, not quotes; the only number that matters is the one on your written estimate, and ours is free.
| Line Item | Typical Range in Fort Worth |
|---|---|
| Ornamental aluminum fence, installed | $28 – $45 per linear foot |
| Wrought iron fence, installed | $45 – $95 per linear foot |
| Footing and concrete work | Included in per-foot pricing on most jobs |
| Standard walk gate (single, 4 ft) | $450 – $900 |
| Driveway gate, swinging or sliding | $1,800 – $6,500+ |
| Pool-code fencing with self-latching gate | Adds $300 – $800 over standard |
| Rust treatment and repaint (repair work) | $350 – $1,200 |
What drives cost up or down on a Fort Worth iron fence job:
- Linear footage and gate count. The fence length is the biggest single number. Every gate you add is its own line item, and a driveway gate costs several times a walk gate.
- Material type. Ornamental aluminum is the budget-friendly choice and holds up well in full Texas sun. Wrought iron costs more but takes impact better and can be repaired by a welder if it’s ever damaged.
- Footing conditions. Rocky ground, existing concrete that has to be cut, or a steep grade along the property line all add labor. This is the number homeowners most often get surprised by, which is why we check it before we price.
- Finish. Powder coating costs more up front than a field-applied paint, but it lasts longer in our climate and needs less upkeep.
- HOA and code requirements. A pool fence or an HOA-mandated style may require specific hardware and heights that add a small amount to the total.
Every estimate we write is free and itemized. The estimate is the price: no surprise add-ons once the crew is on site. If the total lands over $10,000, you can take $1,000 off, and we offer 0% financing for 18 months to make a larger iron fence project easier to budget. Call (855) 912-5373 for your free estimate and design consult.
FAQs – Iron Fence
How much does an iron fence cost in Fort Worth?
Most residential iron fence projects in Fort Worth run $3,200 to $9,500, with ornamental aluminum at the lower end around $28 to $45 per linear foot and wrought iron at $45 to $95 per linear foot. Gates, pool-code requirements, and tough footing conditions push the total up. Call (855) 912-5373 for an exact quote, and the estimate is free.
How long does iron fence installation take?
Most Fort Worth iron fence jobs are finished in two to four days once material is on site, and many single-visit installs are completed in a day. The wildcard is footing work in clay soil and whether custom gates have to be built to size. We’ll give you a realistic timeline with your estimate rather than an optimistic one.
Is iron fencing better than wood fencing in Fort Worth?
Iron lasts longer than wood in Fort Worth’s climate, especially at the posts, where our clay soil works wood loose and rots the base. Wood is cheaper up front and gives more privacy; iron gives more durability, curb appeal, and security. The right choice depends on whether you’re fencing for privacy or for a boundary you want to keep for decades. Call (855) 912-5373 and we’ll talk through both honestly.
Can you repair a rusted or leaning iron fence instead of replacing it?
Often yes. Rust-through at the welds, a few leaning posts from failed footings, and missing pickets can usually be repaired for $350 to $1,200 depending on the scope. We’ll assess the footing condition and weld integrity and tell you straight when a repair makes sense and when a replacement is the better spend. Call (855) 912-5373 to get an honest read before you commit to either.
Get an Iron Fence Estimate in Fort Worth
An iron fence is a long-term investment in your property line, and it deserves a contractor who shows up, prices it straight, and stands behind the work in writing. Groundwork Construction Co. of Fort Worth builds iron fencing with the 730-Day Done Right Promise behind every job, upfront pricing so there are no surprises, and a live person on the phone 24/7, so you’re never stuck in a voicemail loop waiting until Monday. If you’re planning a fence and want to see how it fits alongside the rest of your property, start with our Fence Installation page, then call (855) 912-5373 for a free estimate and design consult. From foundation to finish line, we build it to last and back it in writing.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth.


