







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBarrel Tile Roofing in Fort Worth, TX
Barrel tile roofing in Fort Worth usually runs $18 to $30 per square foot installed, which puts a typical 2,000-square-foot roof replacement somewhere between $26,000 and $48,000 depending on tile type, pitch, and how much of the original roof can be saved. Barrel tile is the Spanish and clay S-tile profile you see across the older neighborhoods near TCU and the Westover Hills estates – a roof that is genuinely built for Texas heat, hail, and the long dry stretches that punish shingle roofs here. Groundwork Construction Co. of Fort Worth installs and repairs barrel tile roofs across the city, and we back every one with our 730-Day Done Right Promise. Call (855) 912-5373 and a live person answers, day or night.
We approach barrel tile differently than the average roofer because the material itself demands it. Clay and concrete barrels are heavy, they move with temperature swings, and they fail at the underlayment long before the tile itself does. Our technicians have up to 12 years of experience with tile roofs specifically, and we handle the whole scope – tear-off, deck inspection, underlayment, tile layout, and flashing – as part of our full Roofing service line. From foundation to finish line, one crew, one accountability chain, one written guarantee.

When You Need Barrel Tile Roofing
Barrel tile roofs don’t announce their problems the way asphalt shingles do. There’s no bald patch, no obvious granule loss. The failure is usually underneath, and by the time it shows up inside the house, it’s been working for a while. Here are the scenarios we see most in Fort Worth.
- Water stains on a vaulted ceiling after a spring storm. Fort Worth’s April and May hail-and-rain events find every gap in aged underlayment. A brown ring on the ceiling drywall is usually the last symptom, not the first – the moisture has been traveling along the barrel channels for months.
- Cracked or slipped tiles after a hail event. Concrete barrels take a hit harder than clay. After a significant hailstorm in the 76107 or 76109 ZIP codes, we regularly see hairline cracks that don’t leak right away but let water into the tile body and shorten the roof’s life. A post-storm inspection catches them while the damage is cheap to fix.
- Visible sagging or a soft spot in the deck. Barrel tile weighs roughly 900 to 1,100 pounds per square. When the roof structure is undersized or has absorbed years of moisture, the deck sags – and that’s a structural conversation, not just a roofing one.
- Failing underlayment on a roof over 20 years old. The tile may look fine from the street while the underlayment beneath it has dried out and cracked – especially on the hotter west-facing slopes where surface temps climb well past 150 degrees in July.
- You’re building an addition or a new build. Homeowners adding square footage or covering a new patio in the Near Southside or Ryan Place often want a roof material that matches the neighborhood’s architectural character and outlasts the mortgage.
- You’re buying a home with an aging tile roof. A pre-purchase inspection of a barrel tile roof is money well spent before closing – the cost of a full tile replacement is a serious negotiating chip, and a written assessment makes the conversation concrete.
Our Barrel Tile Roofing Process
Barrel tile work is exacting, and shortcuts taken on day one show up as leaks in year eight. Here’s how we run a tile roof project from the first call to the final walkthrough.
- Free estimate and on-site assessment. We walk the roof, measure the deck, note the tile profile and pitch, and photograph anything that needs attention. You get a written, upfront price – the number you see is the number you pay. No surprises after the tear-off.
- Material and system selection. We walk you through clay versus concrete barrels, color and profile options, and the underlayment system. Barrel tile is only as good as what’s under it, so we spec a high-temperature self-adhered membrane and a secondary water barrier suited to Fort Worth’s heat cycling.
- Deck inspection and repair. Once the old tile is off, we inspect the sheathing for rot, soft spots, and any prior patchwork. Rotted sections get replaced before anything goes back on – we won’t cover damaged decking and hand you a warranty on top of it.
- Underlayment and flashing install. We lay the membrane and underlayment, then reflash the valleys, penetrations, skylights, and chimney. Flashing is where most tile roof leaks originate, so it gets the same attention as the tile itself.
- Tile setting and layout. The barrels go down in a consistent, straight line – a sloppy layout is impossible to hide on a tile roof. Ridge caps, hip lines, and edge details are set to match the original architectural intent.
- Final walkthrough and handoff. We walk the finished roof with you, show you what was done, and put the whole thing behind our 730-Day Done Right Promise – if it’s not done right, we make it right. Built to last, backed in writing.

Barrel Tile Roofing Pricing in Fort Worth
Barrel tile roof replacement in Fort Worth generally falls between $26,000 and $48,000 for a typical single-family home, and tile roof repair runs $600 to $3,500 depending on the scope. Those are honest ranges, not teasers – the real number depends on the size and complexity of your roof, and you’ll get it in writing before we touch a shovel.
| Project type | Typical Fort Worth range |
|---|---|
| Barrel tile roof replacement (per square foot, installed) | $18 – $30 / sq ft |
| Full replacement, 2,000 sq ft roof | $26,000 – $48,000 |
| Targeted tile repair (cracked or slipped tiles) | $600 – $1,800 |
| Underlayment replacement under existing tile | $8 – $14 / sq ft |
| Deck repair and sheathing replacement | $2.50 – $5 / sq ft |
| Full-flashing and valley rebuild | $1,200 – $3,500 |
Several things move the number up or down. Clay barrels cost more than concrete barrels and are more brittle to walk on. A steep pitch slows installation and adds labor. Complex rooflines with multiple valleys, dormers, and hips cost more than a clean gable. If the deck needs sheathing work after tear-off, that’s an add. And if you’re covering a roof that’s high in a two-story home, the staging and safety setup is a real cost – we don’t cut corners on either.
Two things make large projects more accessible here. Right now we’re offering $1,000 off projects over $10,000, and 0% financing for 18 months is available to help spread the cost. Our estimates are always free – no-hassle upfront pricing, no pressure to sign on the spot.
Barrel tile is a long-horizon roof, and the material brand matters. We work with a curated set of verified brand partners across all our trades – the same discipline we apply to a James Hardie siding project or a KraftMaid kitchen comes down to the roof. Premium materials, applied correctly, is what lets us stand behind a 730-day guarantee without hedging.
We serve homeowners across Fort Worth and the surrounding communities, from Ridglea and Monticello to Arlington, Benbrook, and Keller. See the full Fort Worth service area for the neighborhoods we cover.
FAQs – Barrel Tile Roofing
How much does barrel tile roof repair cost in Fort Worth?
Barrel tile roof repair in Fort Worth typically costs $600 to $1,800 for targeted fixes like cracked tiles, slipped barrels, or a localized flashing repair. If the underlayment has failed across a whole slope, expect $8 to $14 per square foot to address it. The only way to get an exact number is an on-site look – call (855) 912-5373 and we’ll schedule a free assessment.
How long does a barrel tile roof last in Fort Worth?
A properly installed barrel tile roof generally lasts 40 to 50 years for concrete tiles and 50-plus years for clay, though in Fort Worth the underlayment will usually need replacement before the tile itself does – often around the 20 to 25 year mark. The tile is the durable part; the membrane beneath it does the protecting.
Is it cheaper to repair or replace a barrel tile roof?
Repair is cheaper when the damage is local – a handful of cracked tiles or a single flashing issue – and a replacement is the better call when the underlayment is failing across large sections or the deck has soft spots. If more than roughly 30% of the roof is compromised, patching tends to cost more over the next decade than doing it once. During a free estimate we’ll tell you which side of that line you’re on, honestly.
Can you fix my barrel tile roof the same day?
Emergency repairs for active leaks are handled as fast as we can get a qualified crew on site, and we answer the phone 24/7 so you’re never stuck leaving a voicemail while water comes through the ceiling. A full replacement needs scheduling and material, but a leak-stopping repair can often happen quickly. Call (855) 912-5373 for a free estimate – a live person picks up any time.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth.


