







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterWindow Installation in Fort Worth, TX
Window installation in Fort Worth typically costs $450 to $1,400 per window for a standard vinyl or aluminum unit, and $1,200 to $3,200 per window for a wood-clad or fiberglass unit in a premium line. Most single-window replacements here are completed in a single visit. If you’re pricing out a whole-house window replacement in Fort Worth, a typical three-bedroom home runs 12 to 20 openings, which puts full-project costs between $9,000 and $28,000 depending on frame material, glass package, and how much rot we find behind the trim.
That’s the honest math, and it’s the number you should have before anyone sets foot in your house. We run window installation as a straight trade inside our broader Windows & Doors service, so whether you’re replacing two fogged-over sliders in a Riverside bungalow or upgrading every single-hung unit in a 1990s subdivision off Basswood Boulevard, the work looks the same on our end: measure twice, pull the right permit, install to manufacturer spec, and back it in writing.
Groundwork Construction Co. of Fort Worth handles window installation as part of the full-scope work we do across this city. Our technicians have up to 12 years of experience, we’re covered by the 730-Day Done Right Promise, and we work with brand partners including Andersen, Pella, James Hardie, and Marvin (plus KraftMaid and Wellborn for the interior trim packages that often ride along with a window job). Call (855) 912-5373 for a free estimate and design consult.
Key Takeaways
- Standard window installation in Fort Worth runs $450 to $1,400 per unit; premium lines run $1,200 to $3,200.
- Most single-window replacements are finished in a single visit.
- Fort Worth’s clay soil, hail season, and west-facing sun load are the three biggest drivers of window wear here, and we build the install around all three.
- Every job is backed by the 730-Day Done Right Promise and priced upfront with no surprises.

When You Need Window Installation
A lot of Fort Worth homeowners put off window replacement because the old units technically still work. They open, they close, they keep the rain out. But “still works” and “worth keeping” are different questions. Here’s what we hear from Fort Worth homeowners before they call us, and what we find on site.
- Fogging between the panes. Sealed glass units fail when the desiccant seal gives up. In Fort Worth, that failure accelerates during the July and August stretch when the exterior pane cooks at 140°F+ in direct sun. Once the seal is gone, the fog never clears and the whole unit has to be replaced. A window with a failed seal is a window that no longer insulates.
- Drafts and high summer electric bills. If you can feel air moving around a closed window frame, the weatherstripping and glazing seals are done. A single-pane aluminum unit from the 1970s leaks even when it’s intact. Replacements with low-E and argon fill cut cooling load noticeably, and Fort Worth’s cooling season is longer than most of the country’s.
- Wood rot under the sill or along the apron. After a hail storm or two and a few wet winters, the wood trim around original windows in older Fort Worth neighborhoods like Mistletoe Heights and Ryan Place starts to soften. When we pull a window and find rot in the rough opening, we address it rather than hiding it under new trim. That’s part of the job, not an upsell.
- Storm damage. Fort Worth sees significant hail, and hail doesn’t need to break glass to total a window unit. Impact dings the frame and can crack the seal on a double-pane unit. If a storm left pockmarks in your siding and your windows suddenly fog weeks later, the two are related. We assess storm damage on windows the same way we assess it on roofs.
- Sticking, hard-to-operate windows. When a window won’t slide, won’t latch, or takes two hands to close, the frame has shifted or the balance is shot. Fort Worth’s expansive clay soil moves a lot with our wet-dry swings, and original-era aluminum frames don’t tolerate that movement well.
- A planned remodel. New siding, a kitchen addition, or a home addition often means new windows at the same time. That’s the cheapest window you’ll ever buy, because the wall is already open and the crew is already on site. We do window installation alongside additions and James Hardie siding work routinely.
If two or more of those sound familiar, it’s worth a look. Call (855) 912-5373 and we’ll tell you straight whether you need new units or a repair.
Our Window Installation Process
Window installation is not complicated, but it is unforgiving. A window that’s out of level, out of plumb, or flashed wrong will leak within a year or two, and the leak shows up inside the wall before it shows up on the glass. Here’s how we run it, step by step.
- On-site measure and scope. We measure every opening, check the rough opening dimensions, inspect the trim and sheathing, and photograph the wall conditions. We also note the orientation of each window. East- and west-facing windows in Fort Worth take the heaviest sun, so the glass package decision runs differently for those than for a shaded north-facing kitchen window.
- Product selection from brand partners we’ve vetted. You pick the frame material, glass package, and finish from a curated set of lines, all with real spec sheets and honest lead times. We won’t sell you a unit just because it’s what’s in a warehouse. You’ll see the actual product and the actual price before you commit. That’s what upfront pricing, no surprises means on a window job.
- Permits. The City of Fort Worth requires a permit for window replacement when it involves structural changes, and often for egress windows. We pull the permit and handle the inspection, so the last thing you’re worried about is a code issue at resale.
- Installation day. We lay drop cloths, protect floors, remove the old units, inspect and repair the rough opening, and install the new windows to manufacturer spec. Flashing, foam, and sealant are done right, not skipped. Most single-window replacements are finished that same day; a whole-house job runs multiple days with the crew staged so each room is weathertight before they leave the wall open.
- Trim and finish. Interior casing, exterior trim, and caulking go in before we call the job done. This is where a lot of window installers fall short, and it’s where our detail work shows. If the interior package includes cabinetry or built-in trim, we bring in KraftMaid and Wellborn lines to match the look.
- Final walkthrough and the 730-Day Done Right Promise. We walk each window with you, demonstrate operation, and leave a written warranty. The 730-Day Done Right Promise covers workmanship for two full years from completion. If it’s not done right, we make it right. That guarantee is one of the longest workmanship guarantees we know of in residential construction, and it applies to window installation the same as it does to a roof.
Throughout the job, calls are answered by a live person, 24/7. You will not hit voicemail, and you will not wait until Monday morning for a callback when there’s a question mid-project.

Window Installation Pricing in Fort Worth
Window pricing is where most contractors get vague, and where most homeowners get burned. We quote upfront and in writing. The number you see is the number you pay. Here’s a line-item view of what Fort Worth homeowners can expect, so you can plan and compare real numbers instead of sales-floor numbers.
| Item | Typical Range |
|---|---|
| Standard vinyl single-hung window (per unit, installed) | $450 – $850 |
| Vinyl slider or casement window (per unit, installed) | $650 – $1,100 |
| Fiberglass frame window (per unit, installed) | $1,000 – $1,900 |
| Wood-clad or premium line window (per unit, installed) | $1,200 – $3,200 |
| Egress window with required enlargement and permit | $2,000 – $4,500 |
| Rough-opening rot repair | $200 – $900 per opening |
| Interior trim and finish casing | $150 – $450 per opening |
| Full-house window replacement (12-20 openings) | $9,000 – $28,000 |
What drives the price in Fort Worth
- Frame material. Vinyl is the entry point. Fiberglass lasts longer and handles heat better. Wood-clad gives you the interior look you can’t fake with vinyl. Each step up in material moves the number.
- Glass package. Standard double-pane, low-E, argon fill, and impact-rated glass each price differently. In Fort Worth’s hail zone, impact-rated glass is a legitimate upgrade and often a good call for the west-facing side of the house.
- Number of openings. Volume helps. Per-window cost drops on a whole-house job compared to a one-window replacement, because mobilization and setup are shared.
- Rot and structural repair. Older Fort Worth homes sometimes hide water damage behind trim. We price the repair before we start, not after.
- Egress and code requirements. Bedroom windows in Fort Worth must meet egress sizing. If the existing opening is undersized, enlargement adds cost, but it’s required for safety.
No-hassle upfront pricing is the standard. We also offer 0% financing for 18 months and $1,000 off projects over $10,000 to make a whole-house window job fit an actual budget instead of a wish list. Free estimate and design consult on every job.
Call (855) 912-5373 for an exact quote. Estimates are free, and you’ll have real numbers before you commit to anything.
Why Fort Worth Homeowners Choose Groundwork for Window Installation
This city has plenty of window installers. What we bring is a different operating standard. Window installation is part of the full-scope work we do here in Fort Worth, and it sits alongside our roofing, siding, kitchen, and addition trades. That matters when a window job reveals a hidden roof leak or a bad wall section, because we can address it in the same project rather than handing you a business card.
We work with a curated set of brand partners rather than whatever’s on a shelf. Andersen and Pella for window units. James Hardie for the siding that surrounds them. KraftMaid and Wellborn when the interior trim package crosses into millwork. Cambria and Kohler aren’t window products, but they’re part of the same partner portfolio, and we bring that same selection discipline to every trade.
Technicians are background-checked and arrive on site in uniform. They show up in marked vehicles, not the unmarked truck that so many homeowners have learned to dread. Live person, 24/7 on the phone. Free estimate and design consult. Upfront pricing. 0% for 18 months. $1,000 off projects over $10,000. Every one of those is a standing commitment, not a special.
And the 730-Day Done Right Promise covers the workmanship for two full years. That is materially longer than the one-year warranty that’s standard in most residential construction contracts, and it means if a window install goes wrong, you call us and we make it right without a fight.
We serve homeowners across Fort Worth and the surrounding communities. If you’re in a nearby area, you can see the full coverage map on our Fort Worth service area page, or you can explore the other trades we run under our main services page.
FAQs – Window Installation
How much does window installation cost in Fort Worth?
Window installation in Fort Worth runs $450 to $1,400 for a standard vinyl or aluminum unit and $1,200 to $3,200 for a premium wood-clad or fiberglass unit, installed. A full three-bedroom whole-house replacement typically lands between $9,000 and $28,000. Frame material, glass package, number of openings, and any rot repair are the biggest cost drivers. Call (855) 912-5373 for an exact quote. Estimates are free, and we quote upfront with no surprises.
How long does window installation take?
Most single-window replacements are done in a single visit, often in a few hours. A full-house window installation in Fort Worth usually takes several days to a week, depending on the number of openings and whether any rough-opening repair is needed. We stage the work so every room is weathertight before the crew leaves the wall open. Call for a scheduling estimate tailored to your home.
Is it cheaper to repair or replace my windows?
It’s usually cheaper to replace a failed window than to repair it, because the sealed glass unit is one piece and can’t be re-fogged once the seal fails. Small repairs like re-caulking, weatherstripping, or replacing a latch or balance are less expensive, and worth it when the glass is still good and the frame is solid. We’ll tell you honestly which is which after a free estimate. Call (855) 912-5373 and we’ll give you real numbers.
Can you install windows in Fort Worth in the same day?
Yes for single-window replacements, and often for small multi-window jobs. We arrive with the new units, remove the old, install, flash, trim, and finish in the same visit. Whole-house window jobs are staged over multiple days. Call (855) 912-5373 and we’ll tell you what your job realistically looks like on the calendar.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth.


