







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in White Settlement, TX: What the Job Actually Involves
Cabinets & countertops in White Settlement usually run $14,000 – $45,000 for a full kitchen’s worth, and the work itself takes 2 – 4 weeks from demo to final caulk. Tear-out and prep eat the first 2 – 3 days, cabinet boxes set over the next 3 – 5, and counters template after that (fabrication adds 7 – 10 days on stone). Call (855) 912-5373 for a free on-site estimate with a written line-item quote.
How we run a cabinet and countertop job, start to finish

The sequence matters more than anything else on this job. Get it out of order and you’re re-cutting filler, re-drilling for outlets, or waiting on a slab that was templated before the boxes were level. Here’s how we actually work it.
Day 1: demo, disconnect, and protect
We pull the old doors, drawers, and countertops, disconnect the sink and any appliance hookups, and cap the supply lines. Floors get rosetin or rigid protection before anything heavy moves across them. You decide here whether the old boxes get hauled off or saved for a garage or shed somewhere on the property; plenty of White Settlement homeowners keep them.
Days 2 – 3: wall prep, plumbing rough-in, electrical
We check the walls for plumb and flat. Older homes rarely are, and a cabinet run that looks square on the floor can show a 3/8-inch gap at the crown. If you’re relocating the sink or adding a dishwasher circuit, the rough-in happens now, before boxes, not after. This is the stage where surprises show up: soft subfloor around a sink, an outlet box hidden behind a cabinet back, a shutoff valve that won’t hold.
Days 3 – 8: cabinet install and leveling
Base cabinets go in first, set to a laser line, shimmed, and screwed to studs. Uppers follow once the base run is locked. We cut for outlets and plumbing in place rather than guessing locations ahead of time. Crown, light rail, filler strips, and toe kick go on last. This is when you finalize door style and hardware placement if it wasn’t settled at the design consult.
Days 8 – 10: countertop template
Once the boxes are set and level, the fabricator templates for stone or quartz. That template is the point of no return: it’s cut to your actual cabinet run, so any change after this means a new slab. Laminate and butcher block skip templating and can often go in on the same visit.
Days 10 – 20: fabrication, set, and finish
Stone fabrication typically runs 7 – 10 business days. On set day the slab goes down on the cabinets, seams get epoxied and polished, the sink gets undermounted and sealed, and the backsplash goes up if it’s in scope. The last day is punch list: drawer alignment, door reveal, caulk lines, and a walkthrough with you before we call it done.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Most of the money on this job sits in three decisions. Make them with real trade-offs in front of you, not a showroom pitch.
- Stock vs. semi-custom cabinets. Stock boxes are the cheapest and fastest path, with limited sizes and standard depths. Semi-custom (KraftMaid and Wellborn both sit here) lets you hit an odd wall exactly and pick interior organizers. Custom is a different budget tier entirely. On White Settlement’s older homes, semi-custom often pays for itself because the walls aren’t square and filler strips start stacking up.
- Quartz vs. granite vs. laminate. Quartz (Cambria is the name most buyers ask about) is non-porous and doesn’t need sealing, and it’s the most common pick for a working kitchen. Granite is natural stone with more movement and a sealer routine every year or two. Laminate is the budget option and holds up fine in a rental or a flip. Butcher block is warm and repairable but needs oiling.
- Plywood vs. particleboard boxes. Plywood handles moisture better around a sink. Particleboard is cheaper and fine if the cabinet run stays dry. Worth asking about, since it’s rarely volunteered.
- Drawer slides and hinges. Soft-close and full-extension slides are an upgrade line item, not a given. On a $14,000 job they’re a small percentage. On a $4,000 cabinet-only install they’re a real chunk.
- Counter edge profile and thickness. A 3cm slab with an eased edge is the standard. A mitered 6cm edge looks heavier and costs more, mostly in labor.
What Cabinets & Countertops costs in White Settlement, TX

Full cabinet and countertop replacement here runs $14,000 – $45,000, with cabinet installation alone at $4,000 – $13,000 and countertop installation at $2,000 – $6,500. Here’s the line-item breakdown we put in a written estimate:
| Line item | Typical range |
|---|---|
| Cabinet installation (standard kitchen) | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash (if included) | $800 – $2,500 |
| Kitchen island (if adding) | $3,000 – $10,000 |
| Full cabinets & countertops, standard kitchen | $14,000 – $45,000 |
Five things push a job toward the high end. First, size and layout: an L-shaped 60s galley is a different job from a U-shape with an island. Second, existing condition: soft subfloor, out-of-plumb walls, or a hidden water leak under the sink. Third, whether you’re relocating plumbing, gas, or electrical. Moving a sink 4 feet can mean a new drain line and a permit. Fourth, material grade: laminate to quartz is a real jump. Fifth, permit scope: cosmetic swaps usually don’t require one, but anything touching plumbing, gas, or structural gets inspected.
What’s in a written estimate: tear-out and haul-off, cabinet boxes and fronts, counters, sink and faucet set, and finish work. What’s typically not: new appliances, new flooring, and anything structural we find after demo. We don’t do change orders on surprises we should have caught at the walkthrough.
See the difference
Before
After
Before
After
Before
AfterWhat White Settlement homes specifically do to this job
White Settlement is an older inner-ring suburb wrapped around the western edge of Fort Worth (ZIP 76116), and most of the housing stock dates to roughly the 1940s through the 1970s. That build era shows up in every cabinet job we do here. Walls aren’t square. Subfloors and pier-and-beam floors have moved with the Blackland Prairie clay that swells and shrinks through the wet-spring and dry-summer cycle, so foundation re-leveling is often a conversation that comes up mid-job. A cabinet run set to a level line can hide a floor that’s 1/2 inch out of plane.
Lot constraints matter too. These are compact lots with detached garages and outbuildings, so getting a 9-foot slab through a side yard is sometimes tighter than the fabricator expects. It’s worth knowing before the template, not on delivery day.
Permitting runs through the smaller municipal office rather than Fort Worth’s larger system, which means the process is simpler but the inspections still happen. Anything touching plumbing, gas, or structural gets a permit and inspection. Spring hail season also affects countertop fabrication schedules: fabricators get backlogged after big storms, so timing the template to avoid peak hail season can shave a week off the job.
Serving White Settlement, TX – Our Local Coverage Area
We serve White Settlement and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in White Settlement

Most full replacements take 2 – 4 weeks. The cabinet install is fast (5 – 6 working days). Most of the wait is stone fabrication (7 – 10 business days after template). Laminate or butcher block can shorten the total to about 10 days. Call (855) 912-5373 to get a schedule pinned to your house.
A straight cosmetic swap usually doesn’t. A permit becomes necessary when you’re moving plumbing, gas, or electrical, or touching structural elements. That’s how we write the estimate: we flag what needs a permit up front, so no one’s surprised by an inspection midway through. Call (855) 912-5373 for a call that sorts it out.
Yes, and it’s the most common version of the job. Keeping the sink, dishwasher, and range in place cuts the cost and shortens the timeline by roughly a week. Some homeowners want a better layout, though, and that’s where a bigger scope comes in. If you’re weighing that, it’s usually part of a full Kitchen Remodeling in White Settlement plan, and pairing the swap with an Garage Conversion ADU in White Settlement or New Detached ADU in White Settlement lets a single permit and schedule carry both.
It runs $14,000 – $45,000 for a standard kitchen, with cabinets at $4,000 – $13,000 and counters at $2,000 – $6,500. The high end is a larger layout in semi-custom with quartz and a relocated sink. Low end is a straight swap at similar size in stock boxes and laminate. Call (855) 912-5373 for an exact number on your kitchen. Estimates are free.
Every cabinet and countertop job is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right. That’s a two-year workmanship guarantee, and it’s in writing. Call (855) 912-5373 to review the specifics on your estimate.
Get a free cabinet and countertop estimate in White Settlement
Cabinets and countertops are a two-decision job: boxes and slab. We’ll walk your kitchen, measure the run, check for out-of-plumb walls and soft subfloor, and hand you a written line-item estimate with permit scope spelled out. That’s part of what our full Kitchen Remodeling work looks like, and it’s the same approach whether you’re in White Settlement right off the Fort Worth line or elsewhere in our White Settlement coverage area. Call (855) 912-5373 to schedule.
Written by the team at Groundwork Construction Co.












