







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Saginaw, TX: What the Job Actually Costs
Cabinets & countertops in Saginaw typically run $14,000 to $45,000 when you’re replacing both, and most of our Saginaw jobs land in the low-to-mid $20s. Cabinet installation alone runs $4,000 – $13,000; countertops $2,000 – $6,500; a new island $3,000 – $10,000. Plan on three to five weeks from demo to final caulk. Call (855) 912-5373 for a free on-site estimate with a written line-item quote.
How We Run a Cabinet and Countertop Job, Stage by Stage

Most homeowners expect a blur of activity and a surprise at the end. Here’s the actual sequence, so you know what to decide and when.
Stage 1: Measure and template (day 1, about two hours). We measure every wall, check for out-of-square corners and floor level, and photograph the plumbing and electrical rough-ins behind the old cabinets. This is where you lock the layout: cabinet boxes, door profile, countertop material choice and edge profile. Nothing gets ordered until you sign off on the measured drawing.
Stage 2: Ordering and lead time (two to four weeks, no one on site). Semi-custom cabinets in the KraftMaid range typically land in three to four weeks; stock boxes in about one. Quartz and granite fabricators need a physical template, which can’t happen until the new cabinets are set, so countertops add roughly five to seven working days after that point. This is the stretch where homeowners get impatient. It’s also the stretch that keeps the install clean.
Stage 3: Demo and prep (days 1 – 2 on site). Out come the old boxes, the old countertop and usually the backsplash. We shut off and cap the water and gas, protect the flooring, and then fix what the old install hid: soft subfloor, out-of-plumb wall studs, a range hood vented into nothing. If the new layout moves the sink or the range, the plumber and electrician rough in on day 2 and an inspection follows before anything gets closed up.
Stage 4: Cabinet set and countertop template (days 3 – 5). Base cabinets get leveled and shimmed, uppers get hung and screwed into studs, and every box is checked for plumb before the next one goes in. Crown molding, filler strips and toe kicks go on last. The countertop fabricator templates on day 5 and cuts off site.
Stage 5: Countertop install and finish (days 6 – 9). Slab or engineered surface goes down and gets seamed, the sink and faucet get set, and the appliance gaps get checked. Then the punch list: drawer alignment, door reveals, caulk lines, and a walkthrough with you before we call it done. If you’re folding cabinetry into a bigger project, our Kitchen Remodeling in Saginaw page covers the full scope.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
The decisions that move both the look and the budget:
- Stock vs. semi-custom boxes. Stock cabinets cost less and arrive fast, but they come in fixed widths, so you fill gaps with filler strips that show. Semi-custom (the KraftMaid tier we install most often) costs more and buys you exact widths, deeper drawers and the door style you actually want.
- Door material and finish. Painted MDF looks crisp and holds up well in dry North Texas air but can chip at the corners. Thermofoil resists moisture and cleans easily, though it can peel at the edges over time. Real wood veneer and solid wood take stain better and can be refinished later, at a higher price.
- Quartz vs. granite vs. laminate. Quartz is non-porous and needs no sealing, which matters in a kitchen. Granite is natural, heat-tolerant and every slab is unique, but it wants resealing. Laminate is the budget play: it’s come a long way and suits a rental or a flip, not a forever kitchen.
- Drawers vs. doors. Full-extension soft-close drawers cost more per unit and are the single upgrade homeowners thank us for most. You’ll use them every day.
- Island configuration. A fixed island with seating and a prep sink needs a plumbing rough-in and a bigger footprint; a rolling or shallow island costs a fraction and can move.
What Cabinets & Countertops Costs in Saginaw, TX

Full replacement of cabinets and countertops in Saginaw runs $14,000 – $45,000. Here’s how the line items break out:
| Line item | Typical range |
|---|---|
| Cabinet installation (boxes, doors, trim) | $4,000 – $13,000 |
| Countertop installation (fabricate and set) | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash (usually paired with the countertop) | $800 – $2,500 |
Five variables push a job toward the high end. Linear feet is the big one: a 12-foot galley and a 30-foot L-shaped kitchen with a peninsula are different projects. Material grade (stock vs. semi-custom, laminate vs. quartz) can swing the total by thousands on its own. Layout changes that move the sink, range or dishwasher add plumbing and electrical rough-in plus an inspection. Existing condition matters: wavy walls and a soft subfloor in an older ranch-era house cost more to correct than a clean newer build. Permit scope adds time when the work crosses into plumbing, gas or electrical.
A written estimate from us lists each line separately, so you can see exactly what you’re paying for and where you could trim. It does not include appliances, flooring, or drywall repair beyond the cabinet footprint.
See the difference
Before
After
Before
After
Before
AfterWhat Saginaw Homes Specifically Do to This Job
Saginaw is still building outward, and that changes the work. Much of the 76131 housing stock is recent subdivision construction, brick-veneer single-family homes on lots that were open ranchland a few years back, with only scattered older houses near the original town core. That means most of the cabinets we pull out here are builder-grade boxes from the last decade or two, not worn-out 1970s cabinets.
The newer homes bring their own wrinkles. Builder-grade cabinet runs are often set against walls that weren’t squared perfectly, and stock boxes were sized to fit the gap, not the room. When we swap in semi-custom, those gaps have to be corrected, and that’s real labor. On the countertop side, the expansive black clay under most of this corridor swells and shrinks between North Texas flash droughts and heavy spring storms, and that movement shows up as hairline cracks at seams and along the wall where a rigid countertop meets a shifting frame. Seam placement and a small expansion gap are not cosmetic details here; they’re what keeps a countertop from cracking in year three.
On the permitting side, cabinet and countertop swaps that don’t touch plumbing, gas or structure generally don’t require a permit in Saginaw. Move a sink, add a gas line for a new range, or take down a wall and that changes. Ask before you buy. HOA rules in the newer subdivisions also occasionally restrict exterior venting changes for range hoods, so check the deed restrictions first. We work throughout the ZIP and across the surrounding corridor; see our Saginaw service-area page for coverage.
Serving Saginaw, TX – Our Local Coverage Area
We serve Saginaw and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Cabinets & Countertops in Saginaw

Three to five weeks from demo to punch list, with two to four weeks of that being order lead time when nothing is happening on site. Active install days are usually five to nine, depending on whether plumbing and electrical move.
Usually not if you’re keeping the layout and leaving plumbing, gas and structure alone. Moving a sink, adding a gas range line or removing a wall does require a permit and an inspection, and we pull those and walk them through.
Yes, and most Saginaw homeowners do exactly that. Keeping the sink and range where they are saves the rough-in cost and the inspection wait, and it’s the difference between a $14,000 job and a $30,000 one. The trade-off is that you work within the existing footprint.
Between $14,000 and $45,000 for cabinets and countertops together, with most jobs in the low-to-mid $20s. Call (855) 912-5373 for an exact quote; estimates are free and we put the line items in writing.
Every job is covered by the 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and make it right. Call (855) 912-5373 for details. Homeowners often pair this work with a Garage Conversion ADU in Saginaw or a New Detached ADU in Saginaw, where cabinetry often needs matching. For the wider scope, see our Kitchen Remodeling service.
Free On-Site Estimate for Cabinets & Countertops in Saginaw
We’ll come out, measure, and hand you a written line-item estimate for cabinets and countertops in Saginaw at no charge. On the call, we’ll talk through your layout, your door and countertop choices, and a realistic timeline. Call (855) 912-5373 to schedule.
Written by the team at Groundwork Construction Co.












