







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose PGT Construction
Groundwork Construction Co. of Fort Worth provides independent PGT construction service across Fort Worth – impact window installation, full window replacement, and emergency storm damage repair. We’re an independent PGT service provider, not affiliated with or authorized by the manufacturer, and that independence is exactly what lets us tell you honestly when a PGT unit can be repaired and when it needs replacing. Our technicians work on PGT WinGuard aluminum and vinyl impact windows, Premier vinyl single-hungs and sliders, and the Estate Collection sliding doors that show up throughout the Fort Worth and Haslet corridor.
Why Trust Groundwork Construction Co. of Fort Worth for Your PGT Construction?

PGT builds its impact lines around Florida’s coastal wind-borne-debris codes, so the products in Fort Worth homes are a specific breed of window – heavier frames, laminated or insulated impact glass, and multi-point hardware you won’t find on standard vinyl. Our technicians have up to 12 years of experience and treat those product generations as their own category rather than generic vinyl. We match glass makeups and frame profiles to your existing series before we quote anything.
We use OEM PGT sash hardware, weather seal, and replacement insulated glass units wherever the product generation is still supported, and quality aftermarket rollers or weather stripping for minor wear items where that’s the smarter call. Warranty-safe practice means documenting the existing unit, photographing the failure, and re-flashing the rough opening during any swap so the next storm doesn’t undo the work. All PGT work here is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. Calls are answered by a live person, 24/7, and estimates are free with upfront pricing: the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Fort Worth
Fort Worth’s hail and straight-line wind events are hard on impact products, and the failures we see are specific to the model line. Here’s what actually goes wrong:
- PGT WinGuard Aluminum – breached glazing seal and weather seal. After a hail strike, the glazing tape behind the frame can gap and let water track behind the frame to the interior sill. You’ll often see a water stain before you ever see a crack.
- WinGuard – hairline cracks at mitered frame corners. Aluminum frames flex under impact, and the miter joint is the first place to crack. A corner crack means the seal is compromised even if the glass looks fine.
- Premier Vinyl Single-Hung – sagging or dragging sashes. Worn tilt-latch and tilt-pin hardware lets the sash drop out of square, so it drags on the jamb and won’t latch. It’s usually hardware and balance wear, not the sash itself.
- Aluminum Series / Estate Collection sliding doors – corroded or misaligned multi-point locking hardware. North Texas dust and moisture work into the lock mechanism and rollers, and the door stops engaging cleanly. Misaligned rollers make the door feel heavier than it is.
- Older impact windows – fogging and seal failure in the insulated glass unit. When the IGU seal fails, moisture gets between the panes and fogs permanently. On a supported generation, the glass can be swapped without replacing the whole frame.
One pattern that repeats across Fort Worth: after a storm event, a homeowner with WinGuard aluminum units finds water staining at the interior sill and a faint fog between the panes, traced back to a breached glazing seal or a hairline corner crack. A qualified local crew documents the damaged units, matches the glass makeup and frame profile to the existing PGT series, then either swaps the IGU or replaces the full unit while re-flashing and sealing the rough opening.
PGT Parts & Our Repair-vs-Replace Approach

Parts get sourced per job. We don’t claim to stock PGT parts locally – we identify your exact series and generation first, then order the OEM sash hardware, weather seal, or replacement IGU that fits it. For minor wear items like rollers and weather stripping, a quality aftermarket part is often the right answer and costs less.
Where the decision gets honest: a fogged IGU on a supported generation is usually a repair. A cracked frame corner, a failed glazing seal across multiple units, or a discontinued glass makeup is where full-unit replacement is the smarter spend. We say so plainly, and we put it in writing with an upfront line-item quote. If you’re weighing repair against replacement on PGT windows in Fort Worth, call (855) 912-5373 for a free estimate.
Typical Fort Worth Pricing
| Service | Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
Our PGT Service Process – Step by Step
- 1
Diagnosis. We identify the PGT series and generation, photograph the failure, and check the glazing seal, corner miters, hardware, and IGU condition. No guessing at the model.
- 2
Repair or replace decision. We match OEM-compatible parts to your series and lay out repair versus replacement with a written line-item quote. Fixed pricing, no change orders for the scope we quoted.
- 3
Install or repair. For a swap, we match the glass makeup and frame profile, set the unit, and re-flash and seal the rough opening so the next storm doesn’t undo it.
- 4
Test. We operate the sashes, check the locks and rollers, confirm the unit latches and seals cleanly, and verify no water can track behind the frame.
- 5
Warranty. Every PGT job is backed by the 730-Day Done Right Promise. If it’s not done right, we make it right – in writing.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Fort Worth
We service and install the PGT lines that actually show up in Fort Worth homes: WinGuard Aluminum Impact Windows and WinGuard Vinyl Impact Windows, Premier Vinyl Single-Hung and Slider Windows, and the Aluminum Series and Estate Collection sliding glass doors. That covers impact-rated and standard vinyl, the hardware sets, and the glass makeups each series uses. If you’re not sure which PGT line you have, we’ll identify it during the free estimate and tell you what’s repairable on that generation.
We Also Service These Brands
We’re multi-brand, not single-brand dependent. Alongside PGT, Groundwork Construction Co. of Fort Worth services KraftMaid cabinetry, Kohler fixtures, GAF roofing, and Master Halco fencing, so a storm-damage job that touches windows, roof, and fencing can run through one team with one point of accountability.
FAQs – PGT Construction Service in Fort Worth

No. We’re an independent PGT service provider and are not affiliated with or authorized by the manufacturer. We work on PGT products with OEM-compatible parts and warranty-safe practices, and we tell you plainly when a repair makes sense versus a replacement.
Yes, wherever the product generation is still supported. We use OEM PGT sash hardware, weather seal, and replacement IGUs for the repair, and quality aftermarket rollers or weather stripping only for minor wear items where that’s the better call.
A single IGU swap or hardware replacement is often a one-visit job. Multi-unit impact window installation depends on unit count and whether re-flashing is needed – we give you a realistic timeline in your written quote, and most installations are scheduled after materials arrive. Call (855) 912-5373 for an exact timeline on your units.
We cover PGT WinGuard Aluminum and Vinyl Impact Windows, Premier Vinyl Single-Hung and Slider Windows, and the Aluminum Series and Estate Collection sliding glass doors. If you’re unsure which series you have, we identify it during the free estimate.
Not when service follows warranty-safe practice – documenting the existing unit, using OEM-compatible parts, and re-flashing the rough opening. We keep that documentation for you so the manufacturer’s warranty stays intact. Our own work is separately backed by the 730-Day Done Right Promise.
In Fort Worth, PGT impact window installation runs $8,000 – $25,000 and window replacement runs $4,500 – $15,000, depending on unit count and series. Every quote is upfront pricing – the number you see is the number you pay – and 0% financing for 18 months is available, plus $1,000 off projects over $10,000. Call (855) 912-5373 for an exact quote; estimates are free.
Usually it depends on the failure. A fogged IGU or failed glazing seal on a supported generation can typically be repaired with a replacement glass unit; a hairline crack at a frame corner or a discontinued glass makeup usually calls for full-unit replacement. We diagnose the specific failure before quoting either way.
Yes – impact units carry heavier frames and must be re-flashed and sealed at the rough opening during installation. Fort Worth’s hail and wind-driven rain find any gap, so we re-flash and seal on every swap and verify the seal before we close out the job.
Worn tilt-latch and tilt-pin hardware lets the sash drop out of square, so it drags on the jamb and won’t latch. It’s usually hardware and balance wear, not a failed sash, and replacing the OEM hardware typically resolves it.
Replacement of like-for-like units in Fort Worth often doesn’t require a permit, but historic districts like Fairmount and Ryan Place carry design-review overlays that can change that. We confirm permit requirements for your address before scheduling so nothing stalls mid-job.
Check the glass etch mark and the frame label – WinGuard impact units carry the impact rating marking, and Premier vinyl singles don’t. If the label is painted over or missing, we identify the series during the free estimate.
Book Your PGT Service in Fort Worth, TX
Whether you need a failed WinGuard unit swapped, a Premier hardware fix, or a full impact window installation across your Fort Worth home, call Groundwork Construction Co. of Fort Worth at (855) 912-5373 for a free estimate. Live person, 24/7. Upfront pricing, no surprises. Backed by the 730-Day Done Right Promise – if it’s not done right, we make it right.
Written by the team at Groundwork Construction Co.












