







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterBathtub Replacement Cost in Fort Worth, TX: What You’ll Actually Pay
Bathtub replacement in Fort Worth runs $9,000 to $28,000 for a full surround and tub rebuild, while a straight alcove swap lands between $1,800 and $5,500 depending on your foundation. The number that matters most in Fort Worth isn’t the tub itself – it’s what’s holding it up. Call (855) 912-5373 and we’ll give you an upfront number, not a range that balloons once the demo starts.

A 300-pound cast-iron soaking tub in a pier-and-beam Fairmount bungalow isn’t a luxury upgrade. It’s a structural conversation. The joists under a 1930s Fort Worth home weren’t engineered for that point load, and the contractor who doesn’t check is the one you’ll be calling in year two when the floor deflects and the drain starts weeping at the joint.

What to look for in a bathtub quote (and what most of them hide)
Fort Worth is a two-speed construction town. Crews toggle between century-old Craftsman blocks in Fairmount and Ryan Place – pier-and-beam, true-dimension 2×8 and 2×10 lumber, lead-paint-era dust protocols – and slab-on-grade tract builds pushing west past Loop 820 toward Walsh Ranch. A tub bid that doesn’t name your foundation type is a bid written for somebody else’s house.
Here’s what separates a real number from a teaser:
- A subfloor and joist assessment before the tub ships. On a pier-and-beam home, we look at span, lumber size, and point-load capacity before anyone orders a 300-pound fixture. On slab, we look at drain location and whether the existing rough-in matches a modern overflow height.
- The access reality. A standard 60-inch alcove tub does not always fit through a 1970s Fort Worth hallway. Pulling a door casing or a small drywall section adds $200-$400. Cheap quotes leave that out and find it later.
- An explicit caulk-and-grout method. North Texas heat swings hard, and acrylic tubs expand and contract more than cast iron. At the deck joint we use a floating caulk joint, not rigid grout – grout cracks first along that seam in this climate.
- A written warranty on the labor, not just the fixture. Every tub project we run is covered by our 730-Day Done Right Promise.
If you want the wider picture on how a tub swap fits into a larger remodel, our overview of Bathroom Remodeling in Fort Worth covers layout, tile, and ventilation decisions that affect your line-item total.
What does bathtub replacement cost in Fort Worth by home type?
Foundation type drives the price more than tub brand does. Use this table as a planning number; the exact figure depends on drain condition, tile scope, and whether the subfloor needs reinforcement.
| Project type | Typical Fort Worth cost |
|---|---|
| Slab-on-grade alcove tub replacement | $1,800-$4,500 |
| Pier-and-beam alcove replacement with subfloor assessment | $2,200-$5,500 |
| Freestanding tub in pier-and-beam home with floor reinforcement | $4,500-$9,000 |
| Full surround and tub gut-and-rebuild | $6,500-$14,000 |
That $9,000-$28,000 lead range on this page reflects a full bathroom remodel where the tub is one part of a broader scope – new surround, tile, vanity, and venting. Most Fort Worth homeowners who call for a tub swap end up in the $2,200-$5,500 band unless the surround is failing too.

The load question nobody asks until the floor moves
Craftsman-era construction in Fairmount and Ryan Place often runs joists at 16 inches on center in true-dimension 2×8 or 2×10 lumber. That’s still strong lumber a century later. It is not automatically rated for a filled cast-iron tub, which can load a floor to well over 500 pounds once you add water and a bather.
On pier-and-beam, a crawl space gives us something slab homes can’t: access to the framing and drain from below. That often makes the plumbing side of the job cheaper than a slab home. The tradeoff is that we can see – and have to address – deflection we’d never notice on a slab. A point-load calculation and, when needed, added blocking or a sister joist keeps a heavy tub honest for the life of the floor.

We build the pre-project walkthrough around this. Subfloor and joist condition get inspected before a tub is ordered, so the fixture is specified for your actual structure, not for whatever’s on sale. No-hassle upfront pricing means the number you see is the number you pay, and our technicians have up to 12 years of experience reading exactly this kind of framing.
Is it cheaper to repair a tub or replace it in Fort Worth?
Replacement usually wins once a tub is cracked, flexing, or failing at the drain. A surface refinish runs a few hundred dollars but doesn’t fix a structural or leakage problem, and it doesn’t last through a Fort Worth summer of expansion cycling. If the tub moves when you step in it or the drain seal is compromised, repair is a bandage.
A full tub-to-shower conversion is a different call: those run $3,500-$10,000 and can be the smarter move if you rarely bathe and want the floor space. Our team walks that trade-off with you before quoting, so you’re comparing real numbers. Call (855) 912-5373 for an exact quote – estimates are free, and there are no hidden surprises.
Can you replace a tub the same day?
Most straightforward alcove swaps are completed in a single day once material is on site. Freestanding installs and pier-and-beam jobs that need floor reinforcement usually run two to three days including the subfloor work and cure time on the deck joint. We give you a real schedule, not a promise that slips.
FAQs
Bathtub replacement in Fort Worth costs $1,800-$4,500 on a slab home and $2,200-$5,500 on pier-and-beam, with freestanding tubs and floor reinforcement pushing toward $9,000. A full surround and tub rebuild runs $6,500-$14,000. Call (855) 912-5373 for a free estimate with an upfront number.
Because the floor has to be checked for point load before a heavy tub goes down. A crawl space gives us drain access that slab homes lack, but the flexible joist system in older Fort Worth homes often needs blocking or a sister joist for cast iron or a big freestanding model. That assessment is built into the bid, not tacked on later.
Yes. We offer 0% financing for 18 months and $1,000 off projects over $10,000, plus a free project estimate and design consult. That keeps a larger remodel – tub, surround, and vanity together – within reach without hidden fees. Calls are answered by a live person, 24/7, so you can start tonight.
Cast iron and solid-surface tubs handle temperature swings better than thin acrylic, which expands and contracts more and stresses the caulk joint. Whichever you pick, the install method matters: we float the deck joint with flexible caulk rather than rigid grout, because grout cracks first along that seam in our climate.
If your tub job is part of a wider renovation, our Bathroom Remodeling team handles the full scope – plumbing, tile, vanity, and waterproofing – under one contractor, from foundation to finish line.
Ready for a real number?
Groundwork Construction Co. of Fort Worth gives you an upfront price before demo, backed in writing by our 730-Day Done Right Promise. Live person, 24/7 – no voicemail. Call (855) 912-5373 for a free estimate and design consult, and we’ll size the right tub to your foundation before you spend a dollar on the wrong one.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












