







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Belgard Construction
Groundwork Construction Co. of Fort Worth provides independent Belgard construction service across Fort Worth, from paver driveway replacement in Fairmount to new patio installations out past Loop 820. What sets our Belgard work apart is where we start: not the surface, but the base, the edge restraint and the joint sand, because Belgard’s interlocking systems fail at those layers far more often than they fail in the paver itself. We’re an independent Belgard service provider with no affiliation to or authorization from Belgard, and we work from the manufacturer’s published installation specs so the assembly performs the way it was engineered to. Call (855) 912-5373 for a free estimate.
Why Trust Groundwork Construction Co. of Fort Worth for Your Belgard Construction?

Our technicians have up to 12 years of experience, and the ones who handle hardscape work know Belgard’s product families by name and by behavior. That matters because Belgard is an engineered system, not a pile of concrete. Dimensions slab pavers in the 12, 16 and 24 series lay up in patterns where the dimensional ratio drives the interlock. Lafitt Rustic Slab and Urbana carry different profiles and different base requirements. Catalina Grana, Catalina Slate, Weston Stone and Bristol Valley are mortar-less wall systems where the cap and connector units determine whether the wall stays put.
We source OEM-compatible Belgard edge restraint, caps, connectors and wall units so the interlock geometry stays true, and we work from Belgard’s published specs for base depth, edge restraint and polymeric joint sand. That’s what keeps a warranty-safe installation warranty-safe. Every project carries our 730-Day Done Right Promise: if it’s not done right, we make it right. Calls are answered by a live person 24/7, and every technician arrives background-checked and in uniform.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Fort Worth
Fort Worth sits on expansive black clay that swells when it’s wet and shrinks through a long, hot summer. Belgard systems are built to handle movement, but only when the layers under them were installed correctly. Here’s what we see most:
- Edge restraint failure on paver driveways and patios. The plastic or aluminum edge pulls loose and the outer course spreads, which opens joints across the whole field. Homeowners usually notice widening joints well before any paver actually rocks. The root cause is almost always a restraint that wasn’t anchored into compacted base, or soil movement that worked it free.
- Polymeric joint sand washing out on Belgard slab pavers. When joints get overfilled or the surface was wet at installation, the polymer never locks properly, and the first hard rain starts pulling it out. Weeds and ant runs colonize the gaps within a season, and the joints keep opening wider.
- Base settling and lippage over Fort Worth clay. Open-graded aggregate that was undercompacted, or too shallow for the paver profile, lets the surface ripple and trip. It’s the single most common reason a Belgard field looks five years older than it is.
- Efflorescence on Catalina and Weston Stone wall blocks. The white salt bloom you see on mortar-less units traces back to moisture wicking out of soil with poor drainage behind the wall. It’s a drainage symptom showing up on the face of the block, not a bad batch of stone.
- Spalling and cap separation on retaining walls. Freeze-thaw is mild here, but soil-moisture cycling behind a wall without proper drainage pushes hard against the units. Caps loosen, faces spall, and the wall starts to lean.
Belgard Parts & Our Repair-vs-Replace Approach

Some parts should stay OEM and some can be aftermarket, and the split matters. Belgard’s own edge restraint, cap and connector units stay OEM because the interlock geometry depends on them; substitute something else and the assembly doesn’t line up the way it was designed. Polymeric joint sand and base aggregate can be quality aftermarket equivalents without hurting the installation, and we’ll say so plainly.
We don’t claim to stock Belgard parts locally. Parts are sourced per job to the spec the product needs, not to whatever’s convenient. On repair versus replace, we’re honest: if a handful of pavers are lipped or a single edge run has spread, a targeted repair makes sense. When the field is more than roughly a quarter of the way failed, or wall blocks are spalling, rebuilding the base is the right call. Resetting pavers over a bad base just re-fails, and you pay twice. Call (855) 912-5373 to talk through yours.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We check base depth and drainage before we touch the surface, confirm whether the edge restraint is anchored, and probe the joint sand to see how much polymer actually locked. This is where the real answer lives.
- 2
Repair or install. For repairs, we pull the perimeter units, re-establish compacted aggregate base in lifts, reset the OEM edge restraint and re-sand joints with polymeric sand once the surface is dry. For new Belgard work, we build from Belgard’s published specs for the specific product line and pattern going in.
- 3
Verification. We check slope and drainage away from the house, confirm joints are filled to the right level, and walk the field for lippage before we call it done.
- 4
Warranty. Every Belgard job we complete is backed by our 730-Day Done Right Promise. If it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Fort Worth
We work with Belgard’s paver slab families, including Dimensions in the 12, 16 and 24 series, Lafitt Rustic Slab and Urbana. On the wall side, we install and repair Catalina Grana, Catalina Slate, Weston Stone and Bristol Valley retaining systems, along with the OEM caps and connectors those systems require. Our hardscape work in Fort Worth focuses on paver patio installation, paver driveway installation and full driveway replacement, plus the base, edge restraint and polymeric sand work that keeps an assembly performing. If you have a Belgard product not listed here, call and we’ll tell you straight whether it’s a fit.
We Also Service These Brands
Belgard is one of our curated brand partners, not our only one. Groundwork Construction Co. of Fort Worth also installs and services KraftMaid cabinetry, Kohler plumbing fixtures, GAF roofing systems and PGT windows across our seven service lines, from kitchens and baths to roofing and home additions. One contractor, one standard, across every trade we touch.
FAQs – Belgard Construction Service in Fort Worth

No. We’re an independent Belgard service provider and have no affiliation with or authorization from Belgard. We work from Belgard’s published installation specs and source OEM-compatible parts where the interlock geometry requires them, which is what you actually need from anyone installing or repairing the product.
Yes, on the components where it counts: edge restraint, caps and connectors stay OEM because the system’s interlock depends on them. Polymeric joint sand and base aggregate can be quality aftermarket equivalents. We source parts per job to the spec the product needs, and we don’t claim to carry Belgard stock locally.
A targeted repair, like re-sanding joints or resetting an edge run, is typically a one-day job. A full paver patio or driveway installation or a rebuild runs several days depending on square footage and how much base work is needed. We give you a written timeline with your estimate so you know what to expect before we start.
We cover Dimensions slab pavers in the 12, 16 and 24 series, Lafitt Rustic Slab and Urbana pavers, plus Catalina Grana, Catalina Slate, Weston Stone and Bristol Valley wall systems. If you have something outside that list, call (855) 912-5373 and we’ll tell you honestly whether we’re the right fit.
Correctly executed repair or installation that follows Belgard’s published specs protects your warranty position better than a shortcut will. We work to those specs for base depth, edge restraint and polymeric joint sand. Belgard’s warranty is between you and Belgard; what we control is that the work is done to spec, and it’s backed by our own 730-Day Done Right Promise.
Here are the market ranges for hardscape work in Fort Worth, priced with base prep, edge restraint and joint sand included:
| Service | Cost Range |
|---|---|
| Paver Patio Installation | $3,500 – $11,000 |
| Paver Driveway Installation | $7,000 – $18,000 |
| Driveway Replacement | $5,000 – $14,000 |
What pushes a job toward the high end is base depth: expansive Fort Worth clay often needs more aggregate and better drainage than a generic number allows for. Call (855) 912-5373 for an exact quote. Estimates are free, pricing is upfront, and the number you see is the number you pay.
Book Your Belgard Service in Fort Worth, TX
Whether you’re replacing a Belgard driveway that’s rippling or starting fresh with a new patio, Groundwork Construction Co. of Fort Worth gives you a written estimate, 0% financing for 18 months, and $1,000 off projects over $10,000. Call (855) 912-5373 for your free estimate and design consult. Live person, 24/7.
Written by the team at Groundwork Construction Co.












