







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Fort Worth Homeowners Choose Kohler Construction
We provide independent Kohler construction service in Fort Worth, handling tub-to-shower conversions, walk-in shower installs, vanity work, and the repair of Kohler cast-iron tubs, Comfort Height toilets, and cartridge faucets. What makes our Kohler work different is that we scope every job around the failure modes these specific fixtures actually develop – rust at the drain collar, worn fill valves, hard-water cartridge stiffness, humid-bathroom vanity swelling – instead of treating a Kohler product like any other. We’re an independent Kohler service provider, not affiliated with or authorized by Kohler, and we say so plainly.
Fort Worth is a city that keeps building over its own history. Century-old stockyards and Near Southside brick warehouses sit a few miles from master-planned sprawl pushing past Loop 820 toward Alliance and Walsh Ranch. Construction here runs at two speeds: historic-district renovation on one permit, greenfield framing on the next. That matters for Kohler work because the fixtures we touch are just as split – a 1970s Memoirs cast-iron tub in Fairmount one week, a brand-new Cimarron in a Walsh Ranch build the next. Call (855) 912-5373 and a live person picks up, day or night.
Why Trust Groundwork Construction Co. of Fort Worth for Your Kohler Construction?

Our technicians have up to 12 years of experience, and a good share of that has been spent with Kohler product in hand. They know that a Santa Rosa one-piece toilet fills and short-cycles on a worn fill valve long before the wax ring ever fails. They know that a Purist thermostatic cartridge stiffens from mineral scale in North Texas water years before it quits outright. That day-in, day-out exposure to Kohler’s cast-iron, vitreous china, and vanity-cabinet quirks is what lets us scope a bath or kitchen around real failure points instead of guessing.
We use genuine Kohler replacement cartridges, fill valves, flappers, and trim wherever the model is still supported, and we source quality aftermarket equivalents only for consumable wear items where the OEM part is discontinued or priced past what makes sense. Every job is warranty-safe: we don’t cut corners that void a manufacturer warranty, and we put our own coverage behind the work with the 730-Day Done Right Promise – if it’s not done right, we make it right. Technicians are background-checked and arrive in uniform. Estimates are free and priced upfront, so the number you see is the number you pay.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Kohler Construction Problems We Fix in Fort Worth
These are the Kohler issues Fort Worth homeowners actually call about – the ones a generic brand page won’t name.
- Cast-iron tub enamel rust at the drain and overflow (Memoirs, Villager). The enamel bond fails first at the drain collar, where water sits and the cast iron under the finish starts to bloom. A reglaze hides it for a season or two, but it won’t stop rust that has worked through the shell – and that’s the difference between a cosmetic fix and a replacement.
- Comfort Height toilet short-cycling (Santa Rosa, Cimarron). A toilet that runs and refills on its own is almost always a worn fill valve or a flapper that no longer seats, not a wax-ring leak. Homeowners often fear the worst; the fix is usually the fill valve, and it’s the first thing we check.
- Stiff or dripping ceramic-disc cartridges and thermostatic valves (Purist, Artifacts). Fort Worth’s hard water scales the cartridge and trim over the years until the handle stiffens or the valve drips. On older collections the trim cartridge can be discontinued and hard to match, which is where parts sourcing gets real.
- Vanity swelling and finish chipping (Tresham, Damask). Kohler’s wood and MDF vanity cabinets swell at the toe-kick and door edges in a humid Texas bathroom, and painted finishes chip at the stiles. It’s a moisture problem as much as a product one.
- Cast-iron tub weight and subfloor issues (Memoirs, Villager). A full cast-iron tub can weigh hundreds of pounds, and on older Fort Worth pier-and-beam floors that load has to be checked before anyone talks about a drop-in replacement. We look at the framing, not just the fixture.
Here’s how a typical Fort Worth Kohler bath job usually goes. It starts with a Memoirs cast-iron tub that has rust blooming around the drain, or a Comfort Height toilet that keeps running because the fill valve has worn out. A qualified local pro pulls the trim and cartridge or valve, checks the tub shell for real rust-through versus surface bloom, and then either replaces the Kohler-specific wear parts or, if the cast iron is compromised, plans a tub-to-shower conversion sized around the existing drain and supply locations. Nothing gets torn out before the shell is honestly assessed.
Kohler Parts & Our Repair-vs-Replace Approach

Parts get sourced per job, matched to the model and series in front of us – we don’t claim to stock Kohler parts locally, because the right part depends on what’s actually installed. For supported models we go genuine Kohler: replacement cartridges, fill valves, flappers, and trim straight from the OEM. For consumable wear items where the genuine part is discontinued or overpriced, we use a quality aftermarket equivalent and tell you which one we’re using and why.
The repair-or-replace call is where honesty earns its keep. A reglaze on a sound cast-iron shell buys you time. A shell with rust-through or a crack means replacement, not a cosmetic fix – and we’ll say so even when the reglaze would be the easier sale. On faucets and valves we weigh the cost of a hard-to-find cartridge against a new trim set, and we lay out both numbers so you decide with real figures.
If you’re weighing a repair against a bigger change, call (855) 912-5373 for a free estimate and a straight answer.
Our Kohler Service Process – Step by Step
- 1
Diagnosis. We identify the exact Kohler model and series, then trace the symptom to its real cause – fill-valve wear versus wax ring, enamel bloom versus shell rust-through, cartridge scale versus a failed valve body.
- 2
Repair or install. Genuine Kohler parts go in where the model is supported; aftermarket only for consumables where OEM is gone or overpriced. Conversions are sized around existing drain and supply locations to keep the change contained.
- 3
Test. Toilets get cycled for phantom running and refill timing. Valves and cartridges get checked for drip and smooth travel. Tubs and showers get a leak test at the drain and overflow, because that collar is where the trouble starts.
- 4
Warranty. The work is covered by the 730-Day Done Right Promise, and we’re careful that nothing we do voids your Kohler manufacturer warranty either.
See the difference
Before
After
Before
After
Before
AfterKohler Products We Service & Install in Fort Worth
We work across the Kohler lines Fort Worth homes actually have. That includes the Memoirs and Devonshire cast-iron bath and pedestal lavatory lines, the Santa Rosa and Cimarron Comfort Height toilets, the Artifacts and Purist faucet and shower-trim collections, and the Tresham and Damask vanity and furniture cabinetry. On the construction side we handle tub-to-shower conversions, walk-in shower installation, and bathroom vanity installation, plus the broader bathroom remodels those jobs sit inside. If it’s a Kohler bath or kitchen fixture, there’s a strong chance we’ve had our hands on the model.
We Also Service These Brands
Groundwork Construction Co. of Fort Worth isn’t single-brand dependent. Alongside Kohler we work with KraftMaid cabinetry, GAF roofing, PGT windows, and Master Halco fencing, plus a curated set of other top-tier partners across every trade. That matters on a real remodel: the bath and the roof and the windows all get handled by one accountable contractor, from foundation to finish line, on one upfront number.
FAQs – Kohler Construction Service in Fort Worth

No. We’re an independent Kohler service provider, not affiliated with or authorized by Kohler. We work on Kohler fixtures and cabinetry as an independent contractor, using genuine Kohler parts where the model is supported. Call (855) 912-5373 for a free estimate.
Yes, for supported models. Replacement cartridges, fill valves, flappers, and trim are sourced as genuine Kohler OEM parts whenever the model is still supported. We use a quality aftermarket equivalent only for consumable wear items where the OEM part is discontinued or overpriced – and we tell you which one we’re using.
Most Kohler wear-item repairs – a fill valve, flapper, or cartridge – are completed in a single visit. Conversions and vanity installs are scheduled jobs, and we give you a realistic timeline in the estimate rather than a guess. Call (855) 912-5373 to schedule your free estimate.
We cover the Memoirs and Devonshire cast-iron bath and pedestal lavatory lines, Santa Rosa and Cimarron Comfort Height toilets, Artifacts and Purist faucet and shower trim, and Tresham and Damask vanities. If your model isn’t listed, call (855) 912-5373 and we’ll confirm coverage.
No – we work warranty-safe. We use genuine Kohler parts where the model is supported and install so nothing we touch voids the manufacturer warranty. Our own work is backed by the 730-Day Done Right Promise.
Kohler-related bathroom work in Fort Worth runs $800 – $3,000 for a vanity installation, $3,500 – $10,000 for a tub-to-shower conversion, $4,500 – $12,000 for a walk-in shower, and $5,000 – $28,000 for a full or small bathroom remodel. Every estimate is free and upfront. Call (855) 912-5373 for an exact quote – estimates are free.
Book Your Kohler Service in Fort Worth, TX
Whether it’s a rusting Memoirs tub, a Santa Rosa toilet that won’t stop running, or a walk-in shower you’ve been planning for two years, we’ll give you a straight diagnosis and an upfront number. Call (855) 912-5373 for a free estimate – a live person answers, 24/7.
Written by the team at Groundwork Construction Co. of Fort Worth.












