







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterChain Link Fence Cost Per Foot in Fort Worth, TX: What Gauge Actually Costs You
Installed chain link fencing in Fort Worth runs about $14 to $28 per linear foot for residential work and $18 to $35 per foot on commercial lots, all-in with posts, rails, mesh, and gates. A typical backyard job lands in the $3,500 to $9,000 range. The spread inside that number comes down to two things most quotes never show you: wire gauge and coating. For an exact figure on your lot, call (855) 912-5373 and we’ll walk the fence line with you. Estimates are free, pricing is upfront, and someone answers the phone around the clock.

After a Fort Worth hail event, the chain link fence that held its shape and the one that rippled at the top rail were probably installed in the same week. The difference was two gauge numbers and $2 per foot.

Why gauge is the whole ballgame in Fort Worth
Chain link gauge works backwards from how most people expect. Lower number, thicker wire. An 11-gauge mesh is lighter and bends under pressure. A 9-gauge mesh is heavier and resists deformation. A 6-gauge mesh is commercial-grade and barely notices a hailstorm.
North Texas throws hail, straight-line wind, and long summers of UV at a fence every single year. That’s not a Dallas problem or a generic “extreme weather” talking point – it’s the specific reason cheap chain link fails here. An 11-gauge fence survives the first couple of seasons fine. By year four or five, after a few spring hail events, you start seeing the tell: the mesh sags between the top rail and the first tension wire, and the fabric never quite springs back. The wire stretched past its yield point and it’s not coming home.
We’ve pulled plenty of fences in south Fort Worth near the rail corridor and out in the newer northwest subdivisions where the original install was 11-gauge galvanized and the homeowner had no idea. The quote said “chain link fence.” That’s it. No gauge, no coating spec. The material meets a photo test and fails a storm test.
Gauge in plain numbers
- 11-gauge galvanized: lightest residential mesh, cheapest per foot, shortest storm life
- 9-gauge galvanized: the residential sweet spot for North Texas, meaningfully more hail and wind resistance
- 9-gauge vinyl-coated: same core wire plus a bonded coating, adds UV and rust protection, holds color
- 6-gauge: commercial mesh, heavy wire meant for security and high-traffic lots
Fort Worth chain link pricing by gauge and coating
What follows are the installed per-foot ranges we quote in Fort Worth. “Installed” means posts set, rails, mesh, tension bands, gates, and cleanup – not materials dropped at the curb. The numbers track what this market actually charges, not an averaged national figure that ignores local labor and clay soil.
| Specification | Installed cost per foot |
|---|---|
| 4-ft, 11-gauge galvanized residential | $14-$19 |
| 6-ft, 11-gauge galvanized residential | $17-$22 |
| 6-ft, 9-gauge galvanized residential | $19-$25 |
| 6-ft, 9-gauge vinyl-coated residential | $23-$28 |
| 6-ft, 6-gauge commercial galvanized | $24-$30 |
| 8-ft, 6-gauge commercial with heavy posts | $28-$35 |
| Walk gate (4-ft) | $150-$300 |
| Drive gate (10-ft to 12-ft) | $600-$1,400 |
Those ranges assume normal soil and reasonable access. A job with a lot of limestone near the surface or a fence line through established trees can push the number up. We tell you which before you sign, not after the crew shows up.

Residential and commercial chain link are two different fences
Here’s where Fort Worth’s layout matters. The east side has a mix of light industrial and residential use running shoulder to shoulder, and the industrial-adjacent stretch south of downtown near the rail lines is filling in fast. On those lots, chain link is doing security work, not just marking a property line.

A commercial spec calls for heavier mesh, taller posts, deeper footings, and a different mesh pattern. A backyard in the Ryan Place area needs a clean 6-ft residential fence that looks tidy and holds against wind. Quoting the same spec for both is how cheap bids happen – somebody prices the commercial lot like a backyard, then the fence folds in year three. We quote each property for what it actually is.
Post size and spacing is the other quiet variable. A 6-ft fence on an open northwest lot that takes wind across a long uninterrupted run needs heavier terminal posts and tighter spacing at corners and gates than the same 6-ft fence tucked in a sheltered infill backyard. Low-bid installers skip that decision entirely. If you want to see how the full fence workflow runs alongside ground and hardscape work, our home page lays out the trades we handle end to end.
What a real chain link quote shows you
Upfront pricing means the written quote names the spec before a post goes in the ground. When you get a Groundwork quote for chain link, it lists gauge, mesh size, coating type, post schedule, and gate hardware. You compare apples to apples with any other bid. No verbal “chain link fence” number with the material grade left undefined until the crew rolls in.
That quote is also backed by the 730-Day Done Right Promise – if it’s not done right, we make it right. Alongside it, current standing offers include a free project estimate and design consult, $1,000 off projects over $10,000, and 0% financing for 18 months. Our technicians have up to 12 years of experience, arrive background-checked and in uniform, and most fence jobs are wrapped in a single visit. When you’re ready to talk specs and alternatives like a vinyl or aluminum option, our Fence Installation service handles the full material lineup, and the Fence Installation in Fort Worth page covers how we size and set posts across this region’s clay soil.
Frequently asked questions
Chain link fence costs roughly $14 to $28 per foot installed for residential work and $18 to $35 per foot on commercial lots in Fort Worth, depending on gauge, coating, height, and gate count. A standard backyard job typically totals $3,500 to $9,000. Call (855) 912-5373 for a free written estimate on your exact fence line.
9-gauge is the better choice for North Texas because it’s thicker wire that resists hail and wind deformation far longer than 11-gauge. The savings on 11-gauge run about $2 per foot, but that lighter mesh tends to ripple at the top rail after a few spring hail seasons and doesn’t recover. For a fence you plan to keep, the heavier wire is the cheaper fence over its life.
Yes, spring hail and straight-line wind are the main reasons chain link fails early in Fort Worth. Hail chips the coating, and wind events push lighter mesh past its yield point so it sags between the top rail and tension wire. Heavy-gauge mesh and vinyl coating both hold up measurably better. Have us inspect and quote before storm season – call (855) 912-5373.
Yes, we quote commercial chain link on Fort Worth lots, and the spec differs from residential work in mesh gauge, post size, footing depth, and height. Security-driven lots south of downtown near the rail corridor and mixed-use east-side properties need heavier mesh and a fuller post schedule than a backyard. Call (855) 912-5373 and we’ll price it to the property.
Get a written chain link quote in Fort Worth
Fence pricing here lives and dies on gauge, coating, and post schedule, and you shouldn’t have to guess which one your bid covers. Call Groundwork Construction Co. of Fort Worth at (855) 912-5373 for a free estimate with the spec spelled out in writing – a live person answers 24/7, and the number you see is the number you pay. Upfront pricing, no surprises, backed by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth, TX.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












