







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Fort Worth?
Custom window and door orders in Fort Worth typically run $4,500 to $15,000 for a standard whole-home window replacement, and $8,000 to $25,000 for impact-rated window installation across a full house. Single custom entry doors with sidelights land around $2,500 to $8,500 installed, depending on material and glass package. The order total climbs fast when you move from wood-clad to aluminum-clad, add custom sizing, or spec impact glass for a Tarrant County home.
We write real numbers on every order sheet, and the number you see is the number you pay. That’s the Groundwork upfront pricing promise, backed by our 730-Day Done Right Promise on the install.
Key takeaways:
- Full-home window replacement in Fort Worth: $4,500 to $15,000.
- Impact-rated window installation: $8,000 to $25,000.
- Single custom entry door, installed: $2,500 to $8,500.
- Custom sizing, impact glass, and wood-clad frames drive the biggest price jumps.
- Calls answered by a live person, 24/7. Free estimate and design consult on every order.

Custom Window & Door Order Cost Breakdown (2026)
Here’s how the numbers shake out line by line for a Fort Worth custom order. These are 2026 Fort Worth market ranges, not national averages. Your exact quote depends on window count, sizes, glass spec, and door count.
| Line Item | Fort Worth Price Range |
|---|---|
| Full-home window replacement (standard vinyl or fiberglass) | $4,500 – $15,000 |
| Impact-rated window installation (full home) | $8,000 – $25,000 |
| Single window replacement, labor and unit | $450 – $1,200 |
| Custom entry door, fiberglass or steel, installed | $1,800 – $4,500 |
| Custom entry door with sidelights and glass package | $2,500 – $8,500 |
| Wood-clad or premium door order | $4,000 – $12,000 |
| Patio door (sliding or French), installed | $1,800 – $6,500 |
| Custom size surcharge (per unit) | $150 – $600 |
| Energy-efficient low-E glass upgrade (per unit) | $100 – $350 |
| Trim, casing, and finish carpentry | $75 – $250 per opening |
| Old window or door removal and disposal | $50 – $150 per opening |
| Permit (Fort Worth, when required for structural changes) | $100 – $500 |
What pushes a Fort Worth order up? Three things: glass spec, frame material, and count. The jump from standard dual-pane to impact glass is the biggest single line item on most orders, and it’s the one Fort Worth homeowners ask about most given hail season. Frame material is the second driver. Vinyl sits at the entry price. Wood-clad and aluminum-clad push you 30 to 60 percent higher per opening. And every opening you add compounds the total. A 12-window house at $800 each is a very different order than an 18-window house at $1,100 each.
What Affects Custom Window & Door Order Pricing in Fort Worth
Fort Worth isn’t a generic climate, and the order should reflect our specific conditions. Here’s what actually moves the number on a Fort Worth job.
- Hail exposure. Tarrant County sits in one of the heaviest hail corridors in Texas. Spring storms pounding through North Fort Worth, Keller, and Saginaw drive most homeowners toward impact-rated glass, which adds roughly $2,000 to $8,000 across a full-home order compared to standard dual-pane. It’s not optional for many homes that plan to stay insured against storm claims.
- Texas summer heat and solar gain. West-facing windows in Fort Worth take brutal afternoon sun from June through September. Low-E glass and solar-reflective coatings run $100 to $350 per unit but can cut cooling load noticeably. On older homes in the Fairmount and Ryan Place historic districts, the original single-pane windows leak so much heat that the upgrade often pays back in a handful of summers.
- Historic district requirements. If you own in Fairmount, Ryan Place, or Mistletoe Heights, the Fort Worth Historic and Cultural Landmarks Commission reviews changes to visible exterior windows and doors. That can add design review time and steer you toward specific profiles. We’ve walked these reviews on Fort Worth properties and build the specs around preservation requirements from the first measuring appointment.
- Home era and wall construction. Older Fort Worth homes in Ridglea, Arlington Heights, and TCU-area neighborhoods often have plaster walls, non-standard rough openings, and lead-based paint layers that require careful handling. Custom sizing runs $150 to $600 per unit, but it’s often the only way to keep a historic opening’s original proportions.
- Frame material. Vinyl is the budget entry. Fiberglass adds 15 to 25 percent. Wood-clad from Andersen or Marvin adds 30 to 60 percent per opening. Aluminum-clad runs similar to wood-clad and suits contemporary profiles.
- Glass package and brand. Andersen, Pella, and Marvin all offer tiers from builder-grade to premium. A 300-series Andersen unit and an E-series Andersen unit for the same opening can differ by hundreds of dollars each. We stock no parts in a warehouse, but we do work directly with these brand partners so the spec sheet is exactly what you ordered.

Why Our Window & Door Orders Look Different in Fort Worth
Ordering windows and doors is not the same as installing them. It’s a long lead-time, high-dollar commitment with dozens of decisions baked in before a single unit ships. That’s why we handle custom orders as one continuous project: measure, spec, order, install, finish, and warrant.
Three things set our window and door orders apart. First, the brand partners. We work with Andersen, Pella, and Marvin directly, plus a curated set of door manufacturers, so you’re choosing from real product lines with real published performance ratings, not whatever is available this week. Second, the 730-Day Done Right Promise covers the install itself – if a unit doesn’t perform, leaks, or the finish fails, we make it right. Third, the order sheet is transparent. No hidden line items, no vague “miscellaneous” charges. Upfront pricing, no surprises, is our standing rule.
Our technicians have up to 12 years of experience, and every one of them arrives background-checked and in uniform. Custom units are heavy, fragile, and expensive, and how they’re handled on install day matters as much as the spec on paper. Every project we touch, from windows and doors to kitchen remodels and Fort Worth service area projects, gets the same standard.
How to Save on Custom Window & Door Order
There’s real money to be found in how you structure a custom window and door order. Here’s what actually saves money without cutting corners.
- Order standard sizes when you can. If your rough openings allow standard sizes, the custom surcharge vanishes. On a 14-window order that’s $2,000 to $8,000 of savings right there.
- Choose impact glass strategically. Full-home impact runs $8,000 to $25,000. If the budget is tight, spec impact on the first-floor and storm-facing sides and standard dual-pane on the rest. You still gain most of the protection and skip a big chunk of the cost.
- Watch door scope creep. Sidelights, transoms, decorative glass, and premium hardware can add 50 percent to a custom entry door order. Decide what you actually need versus what looks good in a showroom.
- Bundle with adjacent trades. If you’re already planning a kitchen remodel or bathroom remodel that touches exterior walls, order those openings on the same project. One mobilization, one permit, one trim finish.
- Take advantage of financing. We offer 0% financing for 18 months on qualifying orders, which spreads a $15,000 window and door order across manageable monthly payments. On any project over $10,000, we also take $1,000 off. A typical whole-home window + door order clears that threshold easily.
- Get the free estimate before you commit to a count. A design consult is free. We walk the home, check every opening, and give you a real number on the actual job. Call (855) 912-5373 to schedule.
One more tip for Fort Worth homeowners: if your doors face west or southwest, budget for a high solar-gain glass package. The upfront cost per unit is $100 to $350, but the afternoon heat here is relentless. In our experience it’s the cheapest part of the order and the most noticed in summer.
How Long Does a Custom Window & Door Order Take in Fort Worth?
Typical Fort Worth custom orders take 6 to 12 weeks from order placement to install, with premium lines or non-standard sizes stretching to 16 weeks. Standard-size stock-spec units can sometimes land in 3 to 5 weeks. The install itself is usually fast – a full home of windows typically installs in 1 to 3 days, and a single door in half a day.
Lead time matters because it shapes your schedule. Impact glass lines in particular run longer because the laminated assembly is made to spec. We start the order conversation with your install window in mind, not the other way around. We also call to confirm lead times before you sign so there are no surprises when the ship date slips.
Repair or Replace? When the Order Makes Sense
Replacing a window costs $450 to $1,200 per unit installed. Repair – resealing, re-glazing, re-hanging, weatherstripping – typically runs $150 to $500 per unit. If a single window is sticking or a single door has failing hardware, repair wins on cost every time.
The math flips when you’re looking at a whole house of failing seals, fogged dual-pane glass, or windows that pre-date 1990. Once you’re repairing five or more units at $300 to $500 each in the same year, you’re already at $2,000 to $2,500 with no gains in energy performance, no impact rating, and no new warranty. That’s when a full order pencils out. In Fort Worth’s older neighborhoods – Arlington Heights, Ridglea, Wedgwood – we see original aluminum and wood windows that have been patched for two decades. Replacing them as a set does more than repair ever could.
Doors are similar. A $200 hardware swap is smart on a sound door. A hollow-core door with a soft frame after 30 Texas summers isn’t worth repairing – a $1,800 to $4,500 custom entry door order beats it on every axis.
Are Custom Impact Windows Worth It in Fort Worth?
For most Fort Worth homeowners, yes. Impact windows in Fort Worth run $8,000 to $25,000 installed, and the delta over standard dual-pane is $2,000 to $8,000 for a full home. That delta gets absorbed fast in hail country. Impact glass doesn’t shatter from hail strikes or wind-borne debris the way standard glass does, and it can lower insurance premiums with many Texas carriers.
The bigger point: Fort Worth gets pummeled. The hail corridor runs right through Tarrant County, and older homes in the western and northern neighborhoods deal with the worst of it. When a hailstorm takes out a set of standard windows, you’re facing a replacement order again in the middle of a storm aftermath backlog – windows and doors ship slower after major regional storms because demand spikes. Avoiding that second order is quiet savings.
FAQs – Custom Window & Door Order Cost
How much does a custom window and door order cost in Fort Worth?
A typical custom window and door order in Fort Worth costs $4,500 to $15,000 for full-home standard windows and $8,000 to $25,000 for impact-rated. Custom entry doors run $1,800 to $8,500 depending on material and glass. Call (855) 912-5373 for a free estimate – quotes are free and there’s no pressure to order.
Is it cheaper to repair or replace my windows in Fort Worth?
Repair is cheaper for a single window – $150 to $500 versus $450 to $1,200 per unit for replacement. But once you’re repairing five or more units in a year, you’re at the same cost as a partial order with none of the performance gains. A full-home order at $4,500 to $15,000 is usually the better move for a pre-1990 home. Call (855) 912-5373 for a walkthrough and a free comparison.
How much do impact windows cost in Fort Worth?
Impact window installation in Fort Worth runs $8,000 to $25,000 for a full home, which is $2,000 to $8,000 more than standard dual-pane across the same opening count. In Tarrant County hail country, most homeowners who plan to stay in their home favor the upgrade. Call (855) 912-5373 for an exact quote on your opening count.
Can you come today to measure for a window and door order?
Usually, yes. Calls are answered by a live person 24 hours a day, so we can typically schedule a measurement the same day or the next business day. Measuring is free as part of the design consult. Call (855) 912-5373 and we’ll confirm a window.
Are custom windows and doors worth it in Fort Worth?
Yes – standard sizes save money, but custom sizing is often the only way to preserve original opening proportions in Fort Worth’s older historic neighborhoods like Fairmount and Ryan Place. The custom surcharge runs $150 to $600 per unit. If your home has non-standard rough openings, custom is the right call. Call (855) 912-5373 for the free design consult that will tell you which is right for your home.
Get Your Custom Window & Door Estimate Today
Fort Worth custom window and door orders are a $4,500 to $25,000 project depending on count, glass, and frame. The only way to know your real number is to measure the actual openings. Our team is standing by, ready to walk your home, spec the order, and put a real number on paper. With the 730-Day Done Right Promise, upfront pricing, 0% financing for 18 months, and $1,000 off projects over $10,000, you’re not gambling on your investment. Call (855) 912-5373 for a free estimate – no voicemail, no waiting, real answers.
Pricing reflects the Fort Worth market as of 2026. Groundwork Construction Co. of Fort Worth offers free estimates – call (855) 912-5373.
What Our Customers Say
"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."
- Marco Castillo"The finished work is exactly what we wanted. It did run about three weeks over, mostly waiting on a cabinet delivery that was out of his hands, though I would have liked more updates during that stretch."
- Dev Sharma"The schedule he gave me at the start was accurate to within four days on a three month job. Anyone who has done a renovation knows how unusual that is."
- Laura Bennett












