







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Watauga, TX: What It Costs and How Long It Takes
A chain link fence in Watauga typically runs $3,500 to $9,000 for a standard residential lot, with most homes landing in the $4,200 to $6,500 range once gates and cleanup are included. A typical job takes two to three days once materials are on site, and the longest single stage is waiting on a permit if your fence sits on a property line that requires one. Call (855) 912-5373 for a free on-site estimate with a written, line-item quote.
How We Build a Chain Link Fence in Watauga, Start to Finish

Chain link looks simple from the street. It isn’t. The difference between a fence that stands straight for twenty years and one that sags after the first heavy clay swell comes down to how the posts are set and how the holes are dug. Here’s the sequence we follow, and where you make decisions along the way.
Stage 1: On-site estimate and layout (day of estimate). We walk the property line with you, measure the run, and flag what’s in the way: the mature pecan and oak trunks that shade most Watauga lots, existing fences that need to come out, buried sprinkler lines, and any low-voltage runs. You’ll decide the fence height and gate placement here. Expect the estimate within a day or two of the visit.
Stage 2: Permits and utility locate (one to two weeks, mostly waiting). If your fence crosses a property line that’s documented on a plat, we pull the permit through the city and call in a utility locate. In Watauga’s older subdivisions, lots were platted decades ago and fence lines often drift from the legal line, so a survey is sometimes worth the money before anyone digs. We’ll tell you if we think you need one.
Stage 3: Demolition and post setting (day one). We remove the old fence if there is one, haul it off, and mark the post line with string. Posts get set in concrete at a depth that holds against the expansive clay subsoil here. This is the slow day. Holes get dug by hand when the run passes near established tree roots, which on a Watauga lot is most of the time.
Stage 4: Framework and fabric (day two). Top rail, tension wire, and the chain link fabric itself go up, then the gates. You’ll pick the gate hardware at the estimate: standard fork-latch walk gates, self-closing springs, or double-drive gates wide enough for a truck or trailer. Each changes the price.
Stage 5: Inspection and cleanup (day three, if required). If the permit requires a final inspection, we schedule it and stay on the job until it passes. Otherwise, we walk the fence with you, check every gate for swing and latch, and clean up the site.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Actually Choose Between
- Gauge (wire thickness). 11-gauge is the heavy residential standard and lasts far longer than 12-gauge. On a Watauga lot with kids or dogs pushing on the fence, the heavier wire is worth the upcharge.
- Coating. Galvanized steel is the budget choice and will darken over time. Vinyl-coated chain link in black or green costs more but holds its color through North Texas sun and doesn’t rust at the cut ends.
- Height. Four feet for a front property line, five to six feet for a back or side fence. Anything over six feet starts to change the permit picture.
- Posts and rails. Round galvanized posts are standard. Heavier-wall posts matter on longer runs and on corner posts where wind load concentrates.
- Gates. Walk gates, self-closing or self-latching gates, and drive gates each add cost. If a pool is involved, self-latching hardware isn’t optional.
- Top rail vs. tension wire. A full top rail gives a cleaner top line. Tension wire is cheaper and common on larger industrial runs but looks less finished on a backyard.
If the fence is part of a full Fence Installation in Watauga project that includes other fence types, we’ll price the whole run in one estimate so you can compare.
What Chain Link Fence Costs in Watauga, TX

Our lead range for chain link in Watauga is $3,500 to $9,000. That covers a standard residential lot with a couple of gates. Here’s what pushes a job toward one end of that range or the other.
- Linear footage. The biggest driver by far. A quarter-acre lot runs far less than a half-acre with multiple corners.
- Material grade. Galvanized 12-gauge at the low end, vinyl-coated 11-gauge at the high end.
- Site condition. Removing an old fence, digging around mature tree roots, or working on a slope adds labor.
- Gates and corners. Every gate is a hinge set, latch, and extra post. Drive gates and self-closing gates cost more than a single walk gate.
- Permit and survey. If a survey is needed to confirm the property line, that’s a separate cost we’ll flag upfront.
A written estimate from us lists the footage, gauge, coating, post spacing, gate count, permit allowance, and haul-away in line items. What’s typically not included: the survey if one is required, and any landscaping replacement on the fence line.
See the difference
Before
After
Before
After
Before
AfterWhat Watauga’s Older Lots and Clay Soil Do to a Chain Link Job
Watauga is a fully built-out inner-ring suburb of Fort Worth with almost no vacant land left, which means fence work here is almost always replacement or property-line work rather than new construction on an open lot. Most of the homes we see are brick ranch and split-level tract houses from the post-war through 1970s era, now fifty-plus years old. That age matters for chain link in specific ways: original fences are often at the end of their life, property lines have drifted from the plat, and the lots are wrapped in mature pecan and oak root zones that make post holes a hand-digging job rather than an auger job.
The clay subsoil is the other force at work. It swells and shrinks with the seasons, and a post set too shallow will heave over a few wet winters. We set posts deeper here than we would on sandier ground. North Texas hail and sun also age galvanized wire faster than homeowners expect, which is why vinyl-coated chain link is the more common choice on Watauga fences today. Groundwork Construction Co. covers Watauga and the surrounding cities, including North Richland Hills, Haltom City, Hurst, and Keller.
Serving Watauga, TX – Our Local Coverage Area
We serve Watauga and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Chain Link Fence in Watauga

Two to three working days once materials are on site, with permit approval adding one to two weeks depending on the city. Call (855) 912-5373 for a free estimate and a realistic schedule for your lot.
It depends on the fence height and whether it sits on a property line documented on a plat. We pull the permit for you where one is required and confirm the answer during your estimate.
Yes, in most cases. We hand-dig post holes near tree roots and stage materials to minimize turf damage. Some disturbance along the fence line is unavoidable, but we leave the site cleaned up.
Most Watauga chain link jobs run $3,500 to $9,000 depending on footage, gauge, coating, gates, and site conditions. Call (855) 912-5373 for a written, line-item quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise. If anything we installed isn’t right, we make it right. Material warranties come separately from the manufacturer.
Get a Free Chain Link Fence Estimate in Watauga
Call (855) 912-5373 to schedule a free on-site estimate for your chain link fence in Watauga. We’ll walk the property line, measure the run, talk through gauge and gate options, and hand you a written, line-item quote with no surprises. If you’re also planning a shed or outbuilding, homeowners often pair this with ADU Site Prep & Utilities in Watauga, and for a new gate or entry door, our team also handles Door Installation in Watauga. You can see the full scope of our Fence Installation service on the hub page.
Written by the team at Groundwork Construction Co.












