







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Site Prep & Utilities in Benbrook, TX: What It Involves and What It Costs
ADU Site Prep & Utilities in Benbrook runs $45,000 – $130,000 and takes six to twelve weeks from first stake to final inspection, depending on how much existing site work has to be corrected before the building pad is ready. That number covers grading and drainage, the slab or pier-and-beam foundation, water and sewer laterals, the electrical service run, and the inspections that follow each stage. Call (855) 912-5373 and we’ll walk your lot with you.
How we run a site prep and utility package, stage by stage

Site work has a fixed order. Skip a step and you pay for it twice, which is why we don’t start trenching until the survey and utility locates are in hand.
Stage 1: Locate, survey and setback check (days 1 – 3)
We call in the 811 locates for gas, water, electric and fiber, and we pull the plat to confirm setbacks against the recorded lot lines rather than guessing from the fence. You decide the exact building footprint on day one, because moving a pad two feet after the forms are set costs real money.
Stage 2: Clearing, grading and drainage (days 3 – 10)
Topsoil comes off, the pad gets cut and compacted in lifts, and we establish the positive slope away from the structure before anything else goes in. On Benbrook’s expansive clay, that grading plan matters more than the pad itself. You sign off on the drainage direction here, and this is the point to say whether you want a French drain or a swale before we backfill.
Stage 3: Utility trenching and rough-in (days 10 – 24)
Water and sewer laterals get trenched, pitched and bedded, then the electrical conduit and service mast go in. If the sewer has to tie into an existing line, that connection gets inspected before backfill. You choose panel location and whether the ADU gets a separate meter or a subpanel fed from the house.
Stage 4: Foundation (days 24 – 38)
Post-tension slab or pier-and-beam, formed and poured, with the moisture barrier and termite treatment in place first. Cure time is not negotiable, and we don’t let framing crews rush it. You decide slab versus raised floor, which affects finish floor height and how the ADU meets the grade.
Stage 5: Rough inspections and backfill (days 38 – 50)
Foundation, plumbing rough, and electrical rough each get inspected before the ground closes back up. We backfill, compact, and restore the disturbed grade and any fence or driveway we crossed. You get the inspection record with the final paperwork.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually change what you pay
Most of the spread between a lean site prep and a full premium one comes down to five decisions. Here’s the honest trade-off on each.
- Slab versus pier-and-beam: A post-tension slab runs less and suits flat lots, but it buries your plumbing in concrete. Pier-and-beam costs more upfront and gives you access for later repairs, which on Benbrook clay is worth considering.
- Separate meter versus subpanel: A separate utility meter means a second monthly bill and a second service drop. A subpanel off the main house is cheaper to install but ties the ADU’s electrical load to your existing service capacity.
- Trench depth and bedding: Standard code-minimum bedding for PVC sewer is fine on stable soil. Near the lake corridor where the water table moves, we sometimes recommend deeper bedding and gravel surround, which adds cost but prevents settling.
- Drainage scope: A simple graded swale is the budget option. A French drain with a gravel trench and outlet costs more but handles the heavy spring rain that pools on low lots.
- Exterior finish tie-in: If the ADU needs to match the main house, James Hardie siding gives you a clean match to most Benbrook exteriors and holds up to the summer heat, while a lower-grade lap siding saves upfront and shows wear sooner.
What ADU Site Prep & Utilities costs in Benbrook, TX

Plan on $45,000 – $130,000 for the site prep and utility package on a Benbrook ADU. Most lots land in the $60,000 – $95,000 band. That range is for the ground work and the utility connections, not the finished structure, which is a separate line item.
Five variables push a job toward the top of the range:
- Lot condition: Flat, cleared ground sits at the low end. A sloped lot, mature trees to remove, or a lot that needs fill brings you up.
- Distance to existing utilities: A short lateral run off the house is cheap. A long trench to the street or a new tap at the main pushes the number up quickly.
- Soil and water table: Benbrook’s blackland clay and the Trinity corridor water table mean deeper footings and more backfill on some lots than others.
- Electrical service size: A full 200-amp separate service costs more than a subpanel. If the main house panel is already maxed, an upgrade adds to the total.
- Permit and inspection scope: Benbrook’s own permit office sets the review and inspection sequence, and a more involved scope means more inspections and more time.
A written line-item estimate from us covers grading, trenching, foundation, materials, inspections and backfill, with the price fixed. It typically does not cover the ADU structure itself, interior finishes, or landscaping beyond restoring disturbed ground. Call (855) 912-5373 for an exact quote on your lot; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Benbrook’s lots and permitting do to this job
Benbrook sits on the southwest edge of Fort Worth along the Lake Benbrook and Trinity River corridor, where a small-town permitting posture meets big-city-adjacent demand. Much of the construction here is infill and rebuild on scattered lots near the lake and the older Benbrook core, not large single-tract subdivision builds. That matters for site prep: a scattered lot often has utilities already stubbed nearby, which can shorten the lateral run, or it can have a plat that doesn’t match what’s on the ground, which we catch in the survey stage. Crews who know Benbrook’s own permit office and inspector expectations have a real edge over Fort Worth outfits that treat it as just another suburb.
The soil and water are the other half of it. Expansive blackland clay means foundations that move with the seasons, and the Trinity corridor floods periodically, so drainage and grading near the lake get scrutinized harder than on a typical Fort Worth lot. We see slab and pier work on mid-century ranch homes near the original core, and newer custom and rural-edge builds toward the county line, each calling for a different foundation approach. Our technicians have up to 12 years of experience reading exactly these conditions.
Serving Benbrook, TX – Our Local Coverage Area
We serve Benbrook and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – ADU Site Prep & Utilities in Benbrook

Expect six to twelve weeks for the site and utility package alone, with most of that time in trenching, foundation cure, and the inspection sequence. A straightforward flat lot runs closer to six weeks; a sloped lot with long utility runs and drainage work pushes toward twelve. Call (855) 912-5373 for a schedule estimate on your property.
Yes. Site prep and utility connections on an ADU require permits and inspections through Benbrook’s own permit office, and each stage (foundation, plumbing rough, electrical rough) gets inspected before the next one starts. We pull the permits and manage the inspections as part of the job. Call (855) 912-5373 to talk through your lot.
Usually, yes. A subpanel fed from the main house and a shared water line are common and save money, as long as your existing panel and meter have the capacity to carry the extra load. We check capacity during the survey stage and tell you honestly whether a separate service is the better call. Call (855) 912-5373 to schedule a look.
The package runs $45,000 – $130,000, with most Benbrook lots landing between $60,000 and $95,000 for the ground work and utilities alone. The structure and finishes are priced separately. Call (855) 912-5373 for an exact line-item quote; estimates are free.
Every project we do carries the 730-Day Done Right Promise: if it isn’t done right, we make it right, backed in writing. That covers the workmanship on grading, foundation and utility install. Call (855) 912-5373 to schedule your free on-site estimate and see the guarantee in writing.
If you’re planning the whole project, this work sits inside the wider scope on our Home Additions & ADU in Benbrook page, and you can see the full service at Home Additions & ADU. We also cover the surrounding area on our Benbrook page, and homeowners often pair this with Concrete Driveways & Concrete Work in Benbrook or a fresh Paver Driveways in Benbrook once the grade is restored.
Get a free on-site estimate for your Benbrook site prep and utilities
Call (855) 912-5373 to schedule a free estimate. We walk your lot, check utility locates, review the plat and your setbacks, and hand you a written line-item quote with the price fixed and no surprises. Live person, 24/7, no voicemail. 0% financing for 18 months and $1,000 off projects over $10,000 are available. From foundation to finish line, we handle the whole job.
Written by the team at Groundwork Construction Co.












