







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Benbrook, TX: What the Job Actually Involves
Paver driveways in Benbrook, TX typically run $7,000 – $18,000 for a standard two-car apron, and most jobs are done in three to five working days once materials land on site. The work is a real excavation job, not a resurfacing job: the old surface comes out, the base goes in compacted in lifts, and the pavers are set on a screeded bed. Call (855) 912-5373 and we’ll walk your driveway and give you a written, line-item number before anything gets torn out.
How a Paver Driveway Gets Built, Stage by Stage

Most contractors gloss over the sequence. Here’s ours, with real durations so you know what your week looks like.
Day 1, morning: demo and haul-off. We cut and break out the existing slab, asphalt or gravel, load it out, and expose the subgrade. On a typical Benbrook two-car drive this is a half-day to a full day depending on thickness and how much rebar is in it. You decide nothing here; we just keep you informed on what we found under the surface.
Day 1, afternoon through Day 2: subgrade prep and base. This is the stage that decides whether your pavers stay flat for twenty years. We proof-roll the subgrade, then bring in crushed stone base and compact it in 2-inch lifts. Expansive clay, which is what most of this ground is, demands a deeper, better-compacted base than you’d need on sandy soil. You choose the base depth at the estimate stage, not now, but this is where it shows up.
Day 2, late: edge restraint and grading. We set the edge restraint and establish final slope away from the house and garage. Drainage decisions get locked in here. If you’re adding a channel drain or tying into an existing swale, this is the moment that happens.
Day 3: setting bed and pavers. We screed a bedding layer, lay the pavers in your chosen pattern, and cut the edges. A full two-car drive is usually a one-day set for a good crew. You’ll want to have your pattern and color locked in well before this day, because changes at this point cost labor.
Day 4, sometimes Day 5: compaction, polymeric sand, cleanup. We compact the field, sweep in polymeric joint sand, wet it down, and do final cleanup. Then a walkthrough with you. Total elapsed time is usually three to five days, and weather in North Central Texas can stretch that, especially spring rain.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Concrete vs. clay pavers. Concrete pavers (Cambridge Pavers and Oldcastle are the two lines we lean on, with Quikrete or Sakrete base and bedding materials) cost less and come in the widest color range. Clay pavers cost more per square foot but hold color longer under Texas sun. Concrete suits most Benbrook budgets; clay suits homeowners who plan to stay put and want the color to fade least.
- Thickness and grade. Standard 60mm pavers are correct for a residential driveway. 80mm is the heavy-duty option if you park a truck or trailer regularly. The upcharge is modest and often worth it.
- Pattern. Running bond and herringbone are the two workhorses. Herringbone interlocks better under turning tires; running bond is faster to lay. Basketweave and ashlar patterns look great and cost more in labor and cuts.
- Edge restraint type. Plastic edge restraint is standard and holds well. Concrete curb restraint costs more and is the right call where the driveway meets a slope or heavy runoff.
- Joint sand. Polymeric sand is the default for driveways here. It locks joints, resists washout in heavy rain, and cuts weed growth. Plain sand is cheaper and needs re-sanding every few years.
What Paver Driveways Cost in Benbrook, TX

Paver driveway installation in Benbrook runs $7,000 – $18,000. That spread is wide because the job varies a lot lot to lot. Here’s what moves the number:
- Square footage. A single-car apron sits near the bottom of the range; a wide two-car drive with a turn-around lands at the top.
- Condition of what’s there. A cracked slab with rebar means more demo, more haul-off, and sometimes subgrade repair.
- Base depth. Expansive clay and any grading issues push base deeper, and base is a real line item.
- Paver grade and pattern. 80mm herringbone with concrete curb restraint is a different number than 60mm running bond with plastic edge.
- Drainage work. Channel drains, tie-ins, or regrading add scope.
A written estimate should spell out square footage, paver type and thickness, base depth, edge restraint, joint sand, demo and haul-off, and any drainage work. What usually isn’t included: relocating utility lines, repairing a damaged foundation, or landscaping repair beyond the drive edges. We tell you upfront which of those apply. Our pricing is upfront with no surprises, and there’s a $1,000 off projects over $10,000 standing offer plus 0% financing for 18 months if you want to spread the cost.
See the difference
Before
After
Before
After
Before
AfterWhat Benbrook Homes Specifically Do to This Job
Benbrook sits on the southwest edge of Fort Worth along the Lake Benbrook and Trinity River corridor, and that geography shapes this work more than most homeowners expect. Much of the construction here is infill and rebuild on scattered lots near the lake and the older town core rather than big single-tract subdivisions. That matters because a paver driveway on a mid-century ranch near the original core often means tearing out a 50-year-old slab with unknown thickness and rebar, while a 1990s tract home in the 76116 ZIP usually has a cleaner starting point. The expansive blackland clay is the other constant: it swells and shrinks with our wet-dry cycles, so base prep and drainage get more scrutiny here than on typical Fort Worth lots. Near the lake and the Trinity corridor, periodic flooding means slab and drainage work gets a hard look from the city’s own permit office and inspectors, and crews who know Benbrook’s expectations have a real edge over out-of-town outfits treating it as just another suburb. For the wider scope, see our Driveway & Pavers in Benbrook page.
Serving Benbrook, TX – Our Local Coverage Area
We serve Benbrook and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked, Paver Driveways in Benbrook

Most paver driveways in Benbrook take three to five working days from demo to final walkthrough. Weather, especially spring rain, can add a day or two. Call (855) 912-5373 for a firm schedule estimate on your specific drive.
Whether a permit is required depends on scope, and anything touching drainage, grade, or the right-of-way near the street typically gets reviewed. We handle the permit pull as part of the job and confirm what’s needed during the estimate. Call (855) 912-5373 and we’ll tell you what your project needs.
No, and anyone who offers to is cutting corners. Pavers over an old slab trap moisture, crack through, and fail within a few years. Proper installation means removing the old surface and building a compacted base. That’s why a real paver driveway costs more than a resurfacing job. Call (855) 912-5373 for an honest assessment of what’s under your drive.
Paver driveway installation in Benbrook runs $7,000 – $18,000 depending on size, base depth, paver grade, pattern, and drainage work. You’ll get a written, line-item estimate before work begins. Call (855) 912-5373 to schedule your free on-site estimate.
Every paver driveway we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (855) 912-5373 to ask what the warranty covers on your specific job.
Homeowners often pair a new drive with Door Installation in Benbrook or Cabinets & Countertops in Benbrook when they’re updating the whole exterior and entry at once. And because we run seven service lines, you can see the full scope of our Driveway & Pavers work and everything else we do across Benbrook.
Get Your Free Paver Driveway Estimate in Benbrook
Call (855) 912-5373 to schedule a free on-site estimate for paver driveways in Benbrook. We’ll measure the drive, look at what’s underneath, talk through paver type and pattern, and hand you a written, line-item quote with upfront pricing. A live person answers around the clock, and every crew member is background-checked and uniformed. Call today.
Written by the team at Groundwork Construction Co.












