







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterVanities, Tile & Fixtures in Fort Worth, TX
Vanity, tile and fixture work is the part of a bathroom remodel that decides whether the room feels finished or half-done. In Fort Worth, a full vanity-and-fixture package – new vanity, floor tile, shower tile and trim-out – typically runs $6,500 to $18,000 depending on square footage, tile selection and whether you’re moving plumbing. We install all of it under one scope, backed by the 730-Day Done Right Promise, so the tile setter and the plumber aren’t pointing fingers at each other when something leaks. Call us at (855) 912-5373 and a live person answers, day or night.
This is the layer of a bathroom project that homeowners actually see and touch every day: the cabinet doors that close squarely, the grout lines that stay white, the faucet that doesn’t drip after six months. It’s also where cheap work shows up fastest. A vanity installed over a floor that’s out of level will crack at the seams within a year. Tile laid without a proper waterproofing membrane behind it in a Fort Worth shower will fail at the bottom row, usually around year three. We’ve torn out enough of those to know the difference between tile that looks good on day one and tile that still looks good in year five.
We handle vanities, tile and fixtures as a defined piece of a larger Bathroom Remodeling in Fort Worth project, which means the trade sequence is coordinated instead of improvised. The vanity doesn’t get set before the floor tile is finished. The shower valve doesn’t get sealed in before the waterproofing is inspected. If you’re weighing a partial refresh against a full remodel, our Bathroom Remodeling page walks through the scope differences, and our home page covers the full range of what we build.
Key Takeaways
- Vanity, tile and fixture packages in Fort Worth generally land between $6,500 and $18,000 for the work itself.
- Waterproofing behind shower tile matters more than the tile brand. We don’t skip it.
- Most single-bathroom fixture and tile jobs finish in 5 to 10 working days once materials are on site.
- Upfront pricing, no surprises. The number on the estimate is the number you pay.
- Calls answered by a live person 24/7, not a voicemail box.

When You Need Vanities, Tile & Fixtures
Some of these are obvious. Others are the kind of thing a Fort Worth homeowner notices for two years before finally calling. Here’s what usually prompts the call:
- Your vanity is pulling away from the wall or sagging at the base. In older Fort Worth homes – the 1950s and 1960s stock around Ridglea, Wedgwood and Arlington Heights – vanity cabinets were often set on particle board that swelled the first time the supply line seeped. Once the cabinet box is soft, no amount of caulk fixes it.
- Grout is cracking, darkening or coming out in the shower floor. Fort Worth’s expansive clay soil shifts with the seasons, and a house that moves slightly can transfer that movement into a tile floor. Dark grout that keeps coming back after cleaning is usually a sign moisture is getting behind the tile, not a cleaning problem.
- You’re replacing a tub with a walk-in shower, or a shower with a tub. This is the most common trigger we see. It always involves moving the drain, redoing the waterproofing and re-tiling, and it’s rarely a weekend job.
- Fixtures are original and parts are discontinued. A 1990s two-handle faucet with a failing cartridge, or a toilet that runs no matter what you replace in the tank – at some point the trim-out is the answer, not another repair.
- You’re prepping a home for sale in a competitive Fort Worth neighborhood. Bathroom updates in the $7,000 to $12,000 range consistently move the needle on buyer perception, especially in the $250K to $450K bracket where older bathrooms stand out sharply against newer listings.
- Water is showing up somewhere it shouldn’t. A soft spot on the floor near the tub, a ceiling stain below an upstairs bathroom, or a shower that reads damp weeks after use. Those need a look before the tile goes back in, not after.
Our Vanities, Tile & Fixtures Process
Here’s how the job actually runs, start to finish. Not every project needs every step, but this is the sequence we work from.
- Free estimate and design consult. We walk the bathroom, measure, and talk through what you want. You’ll get a written scope with line-item pricing. If you’re choosing between two vanity layouts or two tile sizes, we price both so you can see the real number difference. No-hassle upfront pricing means the estimate you sign is the number you pay.
- Material selections locked in. Vanity cabinets from lines like KraftMaid and Wellborn, countertops (quartz from Cambria is a strong choice for humid bathrooms because it doesn’t absorb water), floor and shower tile, and fixtures. We’ll tell you plainly where the upgrade is worth the money and where it isn’t. We also order materials before demo starts, so the bathroom isn’t sitting gutted while a tile order is in transit.
- Demo and substrate inspection. Tear-out of the old vanity, tile and fixtures. This is where surprises live. Rotted subfloor around a toilet flange, a leaking shower pan, galvanized supply lines that are due. If we find something, you get a written add-on before anyone touches it. No verbal “hey, we found a thing” phone call that turns into an invoice at the end.
- Rough-in and waterproofing. New plumbing rough-in if fixtures are moving, electrical for vanity lighting and any in-mirror defogger, then backer board and a bonded sheet or liquid waterproofing membrane in the wet area. This step is unseen and it’s the one that determines whether the tile job lasts. We inspect it before tile goes up.
- Tile, vanity and trim-out. Floor tile first, then wall and shower tile, then the vanity set and leveled, countertop templated and installed, and finally fixtures – faucets, shower trim, drains, toilet, and every accessory. Laser-level checks on the floor and vanity. Grout lines are consistent, corners mitred or caulked as the material calls for.
- Final walkthrough and handoff. We walk it with you, demonstrate every fixture, and leave the care instructions for the tile and grout. Every project is covered by the 730-Day Done Right Promise, so if a faucet drips or a tile comes loose in that window, we come back and make it right.
Most single-bathroom vanity, tile and fixture packages run 5 to 10 working days once materials are on site. Larger bathrooms with a walk-in shower conversion and floor-to-ceiling tile run longer. Every technician on the job is background-checked and in uniform, which sounds like a small thing until you’ve had the alternative.

Vanities, Tile & Fixtures Pricing in Fort Worth
Honest numbers, not teaser ranges. Real Fort Worth pricing depends on bathroom size, tile selection, and how much plumbing moves. Here’s what the work typically runs:
| Line Item | Typical Range | What Drives the Number |
|---|---|---|
| Vanity cabinet (24″ – 60″) | $500 – $2,400 | Size, construction (plywood vs. particle board), brand line |
| Countertop (cultured marble to quartz) | $300 – $1,800 | Material, sink configuration, backsplash included or not |
| Floor tile installation | $1,200 – $4,500 | Square footage, tile format, pattern (herringbone adds cost), subfloor repair |
| Shower / tub surround tile | $2,000 – $6,500 | Waterproofing method, tile size, niche and bench add-ons |
| Fixture package (faucet, shower trim, toilet, drains) | $800 – $3,500 | Brand, finish, thermostatic vs. standard shower valve |
| Plumbing rough-in relocation | $600 – $2,800 | Moving drain or supply lines, slab vs. pier-and-beam |
| Vanity lighting and electrical | $400 – $1,500 | New circuits, GFCI requirements, in-mirror defogger |
Bundle a typical package – mid-grade vanity, quartz top, floor tile, a tiled shower surround with proper waterproofing, and a fixture package – and you’re usually in the $6,500 to $18,000 range for the work. A powder room refresh that only swaps the vanity, top and faucet can come in under $4,000. A full primary bath with floor-to-ceiling tile, a curbless shower and a 60-inch double vanity will land at the top of the range or above.
What affects the price most in Fort Worth
- Slab vs. pier-and-beam. Fort Worth has a lot of both. Moving a drain line through a slab costs more than working under a pier-and-beam house, and it’s the single biggest variable most homeowners don’t anticipate.
- Tile format and pattern. Large-format porcelain goes down faster than a 3-inch hex mosaic. A herringbone floor adds labor. Natural stone – marble, travertine – adds material cost and requires sealing.
- Existing condition behind the wall. A 1950s home near TCU or in Mistletoe may have galvanized plumbing that’s at the end of its life. If it has to go, it’s better to do it during the remodel than after.
- Vanity size and configuration. A single 30-inch vanity vs. a 72-inch double with a knee space and two sinks is a material and labor swing.
- Waterproofing method. A bonded sheet membrane system costs a bit more up front than cement board with a painted-on sealant. It also performs better. We’ll show you both and tell you which we’d use in our own house.
Making the number work
Two things make a $10,000-plus bathroom package more accessible than a raw number suggests. The first is 0% financing for 18 months, which spreads the cost without interest piling up. The second is $1,000 off projects over $10,000. Pair those with a free project estimate and design consult and a mid-size vanity-and-tile project becomes a monthly number instead of a lump sum.
If you want a ballpark before you call, tell us the bathroom’s approximate footprint, whether the layout is changing, and whether your tile taste runs to builder-grade porcelain or something like a marble-look large format. We can usually give you a working range on the first call. Call (855) 912-5373 – a live person answers.
FAQs – Vanities, Tile & Fixtures
How much does a bathroom vanity and tile installation cost in Fort Worth?
A typical vanity-plus-tile package in Fort Worth runs $6,500 to $18,000 for the work, with most single-bathroom projects landing in the $8,000 to $13,000 range once a new vanity, quartz or cultured-marble top, floor tile, a tiled shower surround and a standard fixture package are included. Moving the drain or supply lines, choosing large-format or natural stone tile, or converting a tub to a walk-in shower pushes the number up. Call (855) 912-5373 for an exact quote on your bathroom – estimates are free and include a written line-item scope.
Can I just replace the vanity and leave the tile alone?
Yes, and it’s a common project. The catch is that the new vanity has to fit the existing floor footprint, and replacing a vanity often reveals wall damage or a floor that wasn’t finished under the old cabinet. We inspect the wall behind and the floor under the old vanity before we set the new one, and if there’s water damage or an unfinished floor, we price the patch honestly instead of covering it up. A vanity-only swap with a new top and faucet typically runs $1,200 to $4,000 installed. Call (855) 912-5373 and we’ll tell you what your specific bathroom needs.
How long does a tile and fixture job take?
Most single-bathroom vanity, tile and fixture packages take 5 to 10 working days once materials are on site. The two things that stretch the timeline are material lead times (special-order tile or a custom vanity top) and any hidden damage found during demo. We order materials before demo starts to keep the bathroom from sitting torn up, and we give you a written schedule with the estimate so you know what to expect. For a firm timeline on your project, call (855) 912-5373.
Do you handle the waterproofing behind shower tile, or is that a separate contractor?
We handle it as part of the tile scope. Waterproofing is not a separate line you have to hire out, and it’s not something we treat as optional. Behind every tiled shower and tub surround we install a proper waterproofing system – either a bonded sheet membrane or a liquid-applied membrane over cement backer board – and we inspect it before tile goes up. It’s the single biggest factor in whether a Fort Worth shower tile job lasts a decade or fails at the bottom row in three years. Every project we complete is backed by the 730-Day Done Right Promise. Call (855) 912-5373 to talk through your shower project.
What tile holds up best in a Fort Worth bathroom?
Porcelain is the practical answer for floors and shower walls in North Texas. It handles the humidity swings, it’s dense enough that it doesn’t absorb much water, and it’s available in formats that look like marble or stone without the sealing maintenance. Natural stone like marble or travertine looks beautiful and is a legitimate choice, but it needs sealing every year or two, and in a bathroom that sees daily showers, we’ll always tell you that up front. Whatever you choose, the substrate and waterproofing underneath it determine how long it lasts. Call (855) 912-5373 if you want to talk tile options for your Fort Worth bathroom.
Do you offer financing on bathroom vanity and tile work?
Yes. We offer 0% financing for 18 months, and projects over $10,000 get $1,000 off. Combined with a free project estimate and design consult, that makes a mid-size vanity and tile package a monthly payment rather than a single outlay. If you’re weighing a $7,000 refresh against a $15,000 full bath, we’ll price both so you can see the actual difference, not a rough guess. Call (855) 912-5373 to get started.
What brands do you work with for vanities and countertops?
We work with a curated set of brand partners, and for vanities that includes KraftMaid and Wellborn, with Cambria quartz as a strong countertop option for bathrooms because it doesn’t absorb water and doesn’t need sealing. James Hardie comes into play on exterior work, not bathroom interiors, so we won’t pretend it belongs in this conversation. The point of working with established brands is that replacement parts and finish matching are available down the road, not just on install day. Call (855) 912-5373 to talk through vanity and countertop options.
Can you match existing tile if I only need part of the bathroom retiled?
Sometimes, and we’ll tell you honestly when we can’t. If your original tile is a current or recently discontinued line, matching is usually possible. If it’s a 1970s pattern that’s been out of production for decades, a true match may not exist, and in that case we’ll show you options: a contrasting accent tile at the transition, retiling the whole floor, or a closely matched modern tile that reads the same from a few feet away. We’d rather have that conversation before demo than after. Call (855) 912-5373 and send us a photo of the existing tile.
Ready to Start Your Fort Worth Bathroom Update?
Vanities, tile and fixtures are the visible layer of a bathroom remodel, and they’re where the difference between a rushed job and a careful one shows up fastest. We install all of it as one coordinated scope, with materials selected and ordered before demo starts, waterproofing done properly behind every wet area, and a written estimate you can hold us to. Every project is covered by the 730-Day Done Right Promise, and our technicians bring up to 12 years of experience to the work. If you’re in Fort Worth and ready to talk through a vanity, tile or fixture project, call Groundwork Construction Co. of Fort Worth at (855) 912-5373 for a free estimate and design consult. A live person answers, 24/7.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth.


