







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterTub-to-Shower Conversion in Fort Worth, TX
A tub-to-shower conversion in Fort Worth typically costs $3,400 to $11,800, and most conversions are finished in two to five working days. We remove the old tub and surround, rework the drain and waterproofing, and set a new walk-in shower designed for the way you actually use the space. It’s the single most common bathroom change we make for Fort Worth homeowners who want a safer, easier-to-clean bathroom without tearing the whole room apart.
Groundwork Construction Co. of Fort Worth handles this from first call to final walkthrough. Calls are answered by a live person, 24/7 – no voicemail, no waiting until Monday. Every project is backed by our 730-Day Done Right Promise: if it’s not done right, we make it right. If you’re weighing a conversion against a fuller renovation, our Bathroom Remodeling in Fort Worth page lays out the wider scope.
Most conversions stay within the existing footprint, which keeps the plumbing rough-in mostly intact and holds the cost down. The work still has to be done right: a shower that leaks behind the wall is a far more expensive problem than a shower that looks dated. We build the waterproofing to last, and we back it in writing.

When You Need Tub-to-Shower Conversion
Here’s how we know a home is a good fit for a conversion rather than a repair or a full gut. If you recognize your situation in two or more of these, a conversion is usually the right call.
- Someone in the house struggles to step over the tub wall. Fort Worth has a lot of single-story ranch homes in Wedgwood and Worth Heights where the only full bath has a deep tub. Stepping over a 16-inch wall gets risky fast for older knees and hips. A low-threshold shower with a proper seat removes that daily hazard.
- The tub is rarely used and the shower is where everyone goes. If the tub in your Riverside or Near Southside house sits empty 350 days a year, it’s occupying the square footage you’d rather have as a walk-in shower with a bench and a place for bottles.
- The surround is failing. Cracked grout lines, soft spots around the drain, or caulk that won’t stay put after a North Texas summer are warnings that water is already getting behind the tile. In older Fort Worth homes, we regularly find moisture damage under tubs that sat in place for 30 years or more.
- The bathroom feels cramped or dark. Removing the tub and going to a glass shower enclosure often makes a small Fort Worth bathroom feel twice as large, with no change to the walls or footprint.
- You need the shower to last through our climate. Fort Worth swings from humid summers to dry winters, and that movement works on tile and grout. A properly sloped, waterproofed shower pan handles it. A shortcut job doesn’t.
- You’re preparing the home for sale or for aging in place. A clean, accessible shower is one of the upgrades buyers and appraisers respond to in the Fort Worth market, and it’s what lets you stay in your home longer.
If you’re unsure which path makes sense, that’s exactly what a free design consult is for. We look at the bathroom, the plumbing, and the structure, then give you a straight answer on conversion versus a fuller remodel. You can also read our broader Bathroom Remodeling scope to see how a conversion fits into a larger project.
Our Tub-to-Shower Conversion Process
This is the sequence we follow on every conversion. We keep it consistent because consistency is what prevents leaks and callbacks.
- Free estimate and design consult. We measure the space, check the drain location and valve condition, look at the wall substrate, and confirm what the shower will need. You get upfront pricing before any work begins – the number you see is the number you pay.
- Protect the home and demo the tub. Floors and surrounding rooms get covered. We pull the tub and surround, remove the old substrate, and inspect what’s behind the wall. If we find rot or a failing valve, we tell you before we rebuild.
- Rework the drain and waterproofing. The drain gets centered for the new shower and the pan is properly sloped. We install a bonded waterproofing membrane or a prefabricated pan, sealed at every corner and seam. This is the layer that decides whether the shower lasts, and it’s where we don’t cut corners.
- Set the walls, tile, and glass. A solid backer board goes up, then the tile and fixture package you picked. Today’s options range from large-format porcelain to low-maintenance solid-surface panels. We also install the valve trim, showerhead, and glass enclosure or curtain rod, depending on your choice.
- Final walkthrough and water test. We run the shower, check slope and drainage, confirm the caulk lines and glass, and clean up the room. You sign off on a finished shower – not a half-done one. Then the 730-Day Done Right Promise takes over.
Most conversions are completed in a single visit for a basic shower, or over several days for tile and glass with custom touches. When you’re ready, call (855) 912-5373 and we’ll get the estimate scheduled.

Tub-to-Shower Conversion Pricing in Fort Worth
You’ll get an honest, itemized number before we start. Here’s a realistic range for Fort Worth so you can budget, sorted by scope.
| Scope | Typical range | What’s included |
|---|---|---|
| Basic acrylic shower conversion | $3,400 – $5,800 | Demo, new pan, prefab surround, standard fixtures, glass curtain or simple enclosure |
| Mid-range tile shower | $5,800 – $8,900 | Tile walls and floor, waterproofing membrane, glass door enclosure, upgraded fixtures |
| Custom walk-in shower | $8,900 – $11,800+ | Large-format tile, bench, niche, linear drain, frameless glass, premium fixtures |
| Plumbing or valve rework | Add $300 – $900 | Moving the drain, replacing a valve behind the wall, addressing rot or failing substrate |
What moves the number: the shower footprint, whether the drain has to move, your tile and fixture selections, and how much damage we find behind the old tub. We inspect that before we quote, so there are no mid-job surprises. Every project over $10,000 qualifies for $1,000 off, the free estimate and design consult is always included, and 0% financing for 18 months lets you spread the cost out.
We don’t guess on your behalf. If you want a firm number for your specific bathroom, call (855) 912-5373 and we’ll set up a no-hassle estimate.
Why Groundwork Construction Co. of Fort Worth
We connect Fort Worth homeowners with independent local professionals who do the work, and we hold the whole project to one standard. Our technicians have up to 12 years of experience, and every one of them is background-checked and arrives in uniform – no unmarked van, no unknown face at the front door.
Our material partners include KraftMaid and Cambria for surfaces and vanities, along with Kohler for fixtures. That means your shower comes with quality you can choose, not just whatever’s in stock. And it’s built to last, backed in writing.
We serve homeowners across the Fort Worth area, from the older homes near the Cultural District to newer builds out toward Aledo and Benbrook. Every job, from the first call to the final walkthrough, runs on the same playbook: live person on the phone, upfront pricing, and a firm promise behind the work.
FAQs – Tub-to-Shower Conversion
How much does a tub-to-shower conversion cost in Fort Worth?
A tub-to-shower conversion in Fort Worth usually runs $3,400 to $11,800, depending on whether you choose a basic acrylic surround or a custom tiled walk-in shower. Most homeowners land in the $5,800 to $8,900 range. Call (855) 912-5373 for an exact quote – estimates are free.
Can you convert a tub to a shower and keep the same footprint?
Yes. In most Fort Worth homes, we can keep the same footprint and reuse the existing valve location, which keeps cost and disruption down. Whether we can reuse the drain depends on how it’s positioned; we check that at the free estimate and tell you before we start.
How long does a tub-to-shower conversion take?
A basic conversion is often done in a single visit, typically one to two days, while a custom tiled shower with glass takes three to five days to allow for waterproofing and tile curing. We give you a realistic timeline up front and stick to it. Call us to schedule.
Is a tub-to-shower conversion worth it?
For most Fort Worth homeowners, yes – especially if a tub goes unused or someone in the household has trouble stepping over the wall. It improves safety and day-to-day use, and a clean, accessible shower is a strong selling point in this market. A free design consult will tell you if conversion or a larger bathroom remodel is the better investment.
Will the job be backed if something goes wrong?
Every conversion is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. We answer the phone 24/7 with a live person, and our background-checked, uniformed technicians are on the job from demo to final walkthrough. Upfront pricing means the number you see is the number you pay.
Ready to Convert Your Tub?
If you’ve been stepping over the same tub wall for years or watching the surround crack, a conversion is a manageable project with a clear finish line. We’ll measure your bathroom, explain the options, and hand you an upfront price before we start. Call (855) 912-5373 for a free estimate and design consult – a live person answers around the clock, and 0% financing for 18 months means you don’t have to wait.
Written by the team at Groundwork Construction Co. of Fort Worth, serving Fort Worth.


